[DeTomaso] Overheating problem

[Richard Greenblum]

By the way, they claim to be spill free, but they're not.  They either have
a plunger like the one in Larry's email, or a valve at the bottom to cut off
the flow.  But, when you remove the funnel, some coolant will spill, there's
no way to prevent it.  I just used rags to catch it before getting on the
hot header.

Obviously, the rest of the standard (Mike's) procedure must be followed--top
off the pressure tank and make sure the catch tank is between a third and
half full depending on which tanks you have.

Richard
Austin, TX

-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Larry
Finch via DeTomaso
Sent: Monday, July 1, 2024 10:15 PM
To: Email List Address For Posting <detomaso at server.detomasolist.com>
Subject: [DeTomaso] Overheating problem

George,

You asked what the best method was to remove air from our cooling systems.
Some people want you to lift the car and lower the car, other people want
you to buy the Lisle radiator funnel kit.