[DeTomaso] harmonic balacners
jderyke at aol.com
jderyke at aol.com
Sun Sep 25 14:33:18 EDT 2022
Can't tell from your description or without a photo, but sounds like the problem is with a bent timing pointer and not the balancer. The pointer is sheet metal and is easily straightened. The balancer may be damaged but I suggest getting someone knowlegable to look at your engine before replacing anything.
-----Original Message-----
From: Steven Edwards <gsedwards at cox.net>
To: detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
Sent: Sun, Sep 25, 2022 8:21 am
Subject: [DeTomaso] harmonic balacners
I have built a 427 small block and thinking that I should change out
the harmonic balance. The one that is on the engine now has been
damaged by the make shift pointer and hard to read. The balance now is
a flow dyne with makes completely around the circumference.
My question is what brand and type of balancer has others used? I will
need to find TDC and install a pointer that does not rub on the
balancer.
Steven Edwards
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Can't tell from your description or without a photo, but sounds like
the problem is with a bent timing pointer and not the balancer. The
pointer is sheet metal and is easily straightened. The balancer may be
damaged but I suggest getting someone knowlegable to look at your
engine before replacing anything.
-----Original Message-----
From: Steven Edwards <gsedwards at cox.net>
To: detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
Sent: Sun, Sep 25, 2022 8:21 am
Subject: [DeTomaso] harmonic balacners
I have built a 427 small block and thinking that I should change out
the harmonic balance. The one that is on the engine now has been
damaged by the make shift pointer and hard to read. The balance now
is
a flow dyne with makes completely around the circumference.
My question is what brand and type of balancer has others used? I
will
need to find TDC and install a pointer that does not rub on the
balancer.
Steven Edwards
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list