[DeTomaso] Techno Question: screw and stud size

[Ken Green]

 Had a division manager at Hughes Aircraft named Pennici, a letter generally distributed in the division had a humorous spell correct error.


    On Thursday, September 22, 2022 at 01:04:26 PM PDT, Mike Drew via DeTomaso <detomaso at server.detomasolist.com> wrote:  
 
 GROUND strap!

Stupid autocorrect….:)

Mike

Sent from my iPad

> On Sep 22, 2022, at 13:01, Mike Drew <mikeldrew at aol.com> wrote:
> 
> …and, if you are using an aftermarket starter sometimes they come with a thicker flange so you need longer studs. I get them at my local Ace Hardware. 
> 
> While you are in the region, it’s a doddle to run a second grind strap from one of the starter studs to one of the three bolts that holds the aluminum engine mount to the chassis. Get the all-metal flat ribbon kind. You will likely need to enlarge the hole on one end to accommodate the large bolt on the engine mount side. 
> 
> Mike
> 
> Sent from my iPad
> 
>> On Sep 22, 2022, at 12:32, jb841 at cox.net wrote:
>> 
>> Chuck,
>> 
>> The size of the starter mounting studs for the stock Ford starter are M10-1.5 x 35 mm.
>> 
>> John
>> 
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> 
>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   Had a division manager at Hughes Aircraft named Pennici, a letter
   generally distributed in the division had a humorous spell correct
   error.

   On Thursday, September 22, 2022 at 01:04:26 PM PDT, Mike Drew via
   DeTomaso <detomaso at server.detomasolist.com> wrote:
   GROUND strap!
   Stupid autocorrecta|.:)
   Mike
   Sent from my iPad
   > On Sep 22, 2022, at 13:01, Mike Drew <[1]mikeldrew at aol.com> wrote:
   >
   > i>>?a|and, if you are using an aftermarket starter sometimes they
   come with a thicker flange so you need longer studs. I get them at my
   local Ace Hardware.
   >
   > While you are in the region, itas a doddle to run a second grind
   strap from one of the starter studs to one of the three bolts that
   holds the aluminum engine mount to the chassis. Get the all-metal flat
   ribbon kind. You will likely need to enlarge the hole on one end to
   accommodate the large bolt on the engine mount side.
   >
   > Mike
   >
   > Sent from my iPad
   >
   >> On Sep 22, 2022, at 12:32, [2]jb841 at cox.net wrote:
   >>
   >> i>>?Chuck,
   >>
   >> The size of the starter mounting studs for the stock Ford starter
   are M10-1.5 x 35 mm.
   >>
   >> John
   >>
   >> _______________________________________________
   >>
   >>
   >> Detomaso Email List is not managed by POCA
   >> Posted emails must not exceed 1.5 Megabytes
   >> DeTomaso mailing list
   >> [3]DeTomaso at server.detomasolist.com
   >> [4]http://server.detomasolist.com/mailman/listinfo/detomaso
   >>
   >> To manage your subscription (change email address, unsubscribe,
   etc.) use the links above.
   >>
   >> Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [5]DeTomaso at server.detomasolist.com
   [6]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:mikeldrew at aol.com
   2. mailto:jb841 at cox.net
   3. mailto:DeTomaso at server.detomasolist.com
   4. http://server.detomasolist.com/mailman/listinfo/detomaso
   5. mailto:DeTomaso at server.detomasolist.com
   6. http://server.detomasolist.com/mailman/listinfo/detomaso