[DeTomaso] Techno Question: screw and stud size

[Mike Drew]

GROUND strap!

Stupid autocorrect….:)

Mike

Sent from my iPad

> On Sep 22, 2022, at 13:01, Mike Drew <mikeldrew at aol.com> wrote:
> 
> …and, if you are using an aftermarket starter sometimes they come with a thicker flange so you need longer studs. I get them at my local Ace Hardware. 
> 
> While you are in the region, it’s a doddle to run a second grind strap from one of the starter studs to one of the three bolts that holds the aluminum engine mount to the chassis. Get the all-metal flat ribbon kind. You will likely need to enlarge the hole on one end to accommodate the large bolt on the engine mount side. 
> 
> Mike
> 
> Sent from my iPad
> 
>> On Sep 22, 2022, at 12:32, jb841 at cox.net wrote:
>> 
>> Chuck,
>> 
>> The size of the starter mounting studs for the stock Ford starter are M10-1.5 x 35 mm.
>> 
>> John
>> 
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> 
>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.