[DeTomaso] Speedometer

[Thomas Tornblom]

Do you have a VDO or Borletti angle drive?

See:
http://server.detomasolist.com/pipermail/detomaso/2013-April/087179.html

/Thomas

Den 2022-09-16 kl. 15:53, skrev Jim Kosloskey:
>     All,
> 
> 
>     My speedometer reads around 42 when the car s going 55. The tires are
>     the proper diameter and the Transaxle is the original. It had been
>     refurbished as needed during the restoration but no indication the
>     speedo drive had been touched.
> 
> 
>     The needle is dead steady (it did need a cable replacement post
>     restoration).
> 
> 
>     So now I need to confirm it has the correct speedo drive before I go
>     further. Is there a method to detect externally if the drive is US or
>     European? Most particularly is there a way to tie the drive to the ZF
>     by some identifier? Or do I need to remove the drive and count teeth or
>     something like that?
> 
> 
>     If the drive seems correct, The last component is the Speedometer. Can
>     these Speedometers be re-calibrated?
> 
> 
>     Thanks,
> 
> 
>     Jim Kosloskey 74 L #6949
> 
> 
> !DSPAM:63247ff316632202621692!
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> 
> !DSPAM:63247ff316632202621692!

-- 
Real life:   Thomas Törnblom             Email:    thomas at hax.se
Snail mail:  Banvallsvägen 14            Mobile:   +46 76 209 8320
              S - 754 40 Uppsala, Sweden