[DeTomaso] Diameter of AC Lines
Julian Kift
julian_kift at hotmail.com
Thu Sep 1 19:32:19 EDT 2022
It's been some time, but I don't recall cutting any holes, I think the lines can be fed through the existing elongated hole fender opening near the condenser.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Mike Drew via DeTomaso <detomaso at server.detomasolist.com>
Sent: Thursday, September 1, 2022 4:21 PM
To: Mike & Elizabeth <mbefthomas2 at gmail.com>
Cc: Email List Address For Posting <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Diameter of AC Lines
Mike,
My lines and your lines could easily have different outside diameters. Don’t cut any holes until you have YOUR lines in-hand.
I would assume you would cut the holes over side and use rubber grommets to protect the lines from being chafed by the body so you would need to have those in hand also….
Mike
Sent from my iPad
> On Sep 1, 2022, at 16:15, Mike & Elizabeth <mbefthomas2 at gmail.com> wrote:
>
> I need to cut the hole in the right rear inner fender in my engine bay
> to run the AC lines out along the frame rail. Can someone tell what
> the diameters of the two rubber lines are? I don't have any of the old
> lines around the garage to check them.
>
>
> Thanks
>
> Mike Thomas
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7C%7C6b1368b98080446b853308da8c70c54e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637976713228703995%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=dzbhMu%2BlVDhhmAg2AW7LMLhIZz3lA1z6T%2BN5zx6iJhY%3D&reserved=0
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7C%7C6b1368b98080446b853308da8c70c54e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637976713228703995%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=dzbhMu%2BlVDhhmAg2AW7LMLhIZz3lA1z6T%2BN5zx6iJhY%3D&reserved=0
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
It's been some time, but I don't recall cutting any holes, I think the
lines can be fed through the existing elongated hole fender opening
near the condenser.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Mike Drew via DeTomaso <detomaso at server.detomasolist.com>
Sent: Thursday, September 1, 2022 4:21 PM
To: Mike & Elizabeth <mbefthomas2 at gmail.com>
Cc: Email List Address For Posting <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Diameter of AC Lines
Mike,
My lines and your lines could easily have different outside diameters.
Don't cut any holes until you have YOUR lines in-hand.
I would assume you would cut the holes over side and use rubber
grommets to protect the lines from being chafed by the body so you
would need to have those in hand also....
Mike
Sent from my iPad
> On Sep 1, 2022, at 16:15, Mike & Elizabeth <mbefthomas2 at gmail.com>
wrote:
>
> I need to cut the hole in the right rear inner fender in my engine
bay
> to run the AC lines out along the frame rail. Can someone tell
what
> the diameters of the two rubber lines are? I don't have any of the
old
> lines around the garage to check them.
>
>
> Thanks
>
> Mike Thomas
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
>
[1]https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fser
ver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7
C%7C6b1368b98080446b853308da8c70c54e%7C84df9e7fe9f640afb435aaaaaaaaaaaa
%7C1%7C0%7C637976713228703995%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwM
DAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&s
data=dzbhMu%2BlVDhhmAg2AW7LMLhIZz3lA1z6T%2BN5zx6iJhY%3D&reserved=0
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[2]https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fser
ver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7
C%7C6b1368b98080446b853308da8c70c54e%7C84df9e7fe9f640afb435aaaaaaaaaaaa
%7C1%7C0%7C637976713228703995%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwM
DAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&s
data=dzbhMu%2BlVDhhmAg2AW7LMLhIZz3lA1z6T%2BN5zx6iJhY%3D&reserved=0
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7C%7C6b1368b98080446b853308da8c70c54e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637976713228703995%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=dzbhMu%2BlVDhhmAg2AW7LMLhIZz3lA1z6T%2BN5zx6iJhY%3D&reserved=0
2. https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7C%7C6b1368b98080446b853308da8c70c54e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637976713228703995%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=dzbhMu%2BlVDhhmAg2AW7LMLhIZz3lA1z6T%2BN5zx6iJhY%3D&reserved=0
More information about the DeTomaso
mailing list