[DeTomaso] Klippan seat belt replacement

[Frank Lisi]

Dennis,

 

Thank you for the information and installation details you provided it was most helpful.  

 

Did you see this belt?  What do you think?  

https://en.klippan.fi/product/85/3p-belt-elr-3000mm--200mm-b-buckle

 

I sent an email asking for more info.  I will post it once I receive a response.  

 

Frank

#6228

 

From: Dennis Valdez <sjcarguy60 at yahoo.com>
Date: Monday, October 17, 2022 at 1:38 PM
To: "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>, Frank Lisi <fjlisi at mediacombb.net>
Subject: Re: [DeTomaso] Klippan seat belt replacement

 

Hi Frank,

I just went through this exercise.  I tried three different venders and found one that would fit from SeatBeltsPlus.com (for some reason my previous response didn't go through)

 

Part number AC12

 

https://www.seatbeltsplus.com/product/AC12.html

You will need to remove the plastic cover that comes with the retractor spool and it will fit within the flanges on the bracket on the bulkhead behind the seats.   Since the spool is larger than stock, you will need to either modify your existing covers, or fabricate new ones out of Sheet metal.  I was able to make covers on my 3D printer that have the right profile and of the right size.

 

The fixed end of the seatbelt will mount under the rocker plate.  If you don't want to cut your original seatbelt to remove the plate, you will need to source replacements.  I was able to get a couple from Mike Mayberry.  I also used a bracket used in baby seats to shorten the seatbelt under the rocker plate to make the new belt shorter, so it would retract faster.

 

On the receiver buckle side, I suggest getting the hardware kit from seatbeltplus to allow the buckle to rest in the proper position without twisting the stiff cable.  

 

I ( and my wife) are very happy with the results!

 

Regards,

Dennis

 

On Monday, October 17, 2022 at 09:23:55 AM PDT, Frank Lisi <fjlisi at mediacombb.net> wrote: 

 

 

  Hi All,

 

 

  Is there a modern replacement for a 1974 late model "L" seat belt?

 

 

  Mine are the original Klippan with two retractors one at the fire wall

  and one at the floor and a short stationary latch belt bolted to the

  floor by the consol.  I want to keep the original seat belt style and

  function, however it is time for and upgrade to modern materials.

 

 

  Many Thanks

 

  Frank Lisi

 

  #6228

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-------------- next part --------------
   Dennis,


   Thank you for the information and installation details you provided it
   was most helpful.


   Did you see this belt?  What do you think?

   [1]https://en.klippan.fi/product/85/3p-belt-elr-3000mm--200mm-b-buckle


   I sent an email asking for more info.  I will post it once I receive a
   response.


   Frank

   #6228


   From: Dennis Valdez <sjcarguy60 at yahoo.com>
   Date: Monday, October 17, 2022 at 1:38 PM
   To: "detomaso at server.detomasolist.com"
   <detomaso at server.detomasolist.com>, Frank Lisi <fjlisi at mediacombb.net>
   Subject: Re: [DeTomaso] Klippan seat belt replacement


   Hi Frank,

   I just went through this exercise.  I tried three different venders and
   found one that would fit from SeatBeltsPlus.com (for some reason my
   previous response didn't go through)


   Part number AC12


   https://www.seatbeltsplus.com/product/AC12.html

   You will need to remove the plastic cover that comes with the retractor
   spool and it will fit within the flanges on the bracket on the bulkhead
   behind the seats.   Since the spool is larger than stock, you will need
   to either modify your existing covers, or fabricate new ones out of
   Sheet metal.  I was able to make covers on my 3D printer that have the
   right profile and of the right size.


   The fixed end of the seatbelt will mount under the rocker plate.  If
   you don't want to cut your original seatbelt to remove the plate, you
   will need to source replacements.  I was able to get a couple from Mike
   Mayberry.  I also used a bracket used in baby seats to shorten the
   seatbelt under the rocker plate to make the new belt shorter, so it
   would retract faster.


   On the receiver buckle side, I suggest getting the hardware kit from
   seatbeltplus to allow the buckle to rest in the proper position without
   twisting the stiff cable.


   I ( and my wife) are very happy with the results!


   Regards,

   Dennis


   On Monday, October 17, 2022 at 09:23:55 AM PDT, Frank Lisi
   <fjlisi at mediacombb.net> wrote:



     Hi All,



     Is there a modern replacement for a 1974 late model "L" seat belt?



     Mine are the original Klippan with two retractors one at the fire
   wall

     and one at the floor and a short stationary latch belt bolted to the

     floor by the consol.  I want to keep the original seat belt style and

     function, however it is time for and upgrade to modern materials.



     Many Thanks


     Frank Lisi


     #6228

   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [2]DeTomaso at server.detomasolist.com
   [3]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://en.klippan.fi/product/85/3p-belt-elr-3000mm--200mm-b-buckle
   2. mailto:DeTomaso at server.detomasolist.com
   3. http://server.detomasolist.com/mailman/listinfo/detomaso