[DeTomaso] Door Handle Bezel
Julian Kift
julian_kift at hotmail.com
Wed May 11 11:31:58 EDT 2022
Gerry,
You only responded to me, not the list, IPSCO may have been the one making correct curvature at one point, but not sure that is still the case.
I believe the guy on Facebook is selling 3D printed ones, with the advances in that area it's probably easy to replicate correctly now.
https://www.facebook.com/photo?fbid=4902683189829725&set=pcb.2461299847334790
Larry Stock also tells me he produces them.
Julian
________________________________
From: GERRY ROMACK <gr2835 at comcast.net>
Sent: Tuesday, May 10, 2022 9:55 PM
To: Julian Kift <julian_kift at hotmail.com>
Subject: Re: [DeTomaso] Door Handle Bezel
IPSCO is the only one that made the correct fitting bezel. I would also like a pair for my car since one is already cracked. When I talked to him he said that he would need an order of 5 or six pairs in order to make another run of them.
Keep me in the loop.
Gerry Romack
> On 05/10/2022 4:22 PM Julian Kift <julian_kift at hotmail.com> wrote:
>
>
> There's someone advertising the bezels on one of the De Tomaso marketplace Facebook pages, those that have purchased seem very happy with the product.
>
> Julian
>
> ________________________________
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of David <david at msmcontractors.org>
> Sent: Tuesday, May 10, 2022 4:18 PM
> To: Detomaso List <detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Door Handle Bezel
>
> Well, my door handle bezel finally broke. Chuck Engles graciously gave me an old spare. Unfortunately upon close observation I found cracks. Decided to bite the bullet and order billet bezels from IPSCO. They don’t have any and said doesn’t know if they will ever have anymore. His had the proper radius so not to warp door skin. Called Hall. She said call Wilkinson. Steve send two out. They have no radius. Does anyone know where you can get bezels with the proper radius?
> Thanks, David Finley
> 3659
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> There's someone advertising the bezels on one of the De Tomaso
> marketplace Facebook pages, those that have purchased seem very happy
> with the product.
>
> Julian
> __________________________________________________________________
>
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
> David <david at msmcontractors.org>
> Sent: Tuesday, May 10, 2022 4:18 PM
> To: Detomaso List <detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Door Handle Bezel
>
> Well, my door handle bezel finally broke. Chuck Engles graciously gave
> me an old spare. Unfortunately upon close observation I found cracks.
> Decided to bite the bullet and order billet bezels from IPSCO. They
> don't have any and said doesn't know if they will ever have anymore.
> His had the proper radius so not to warp door skin. Called Hall. She
> said call Wilkinson. Steve send two out. They have no radius. Does
> anyone know where you can get bezels with the proper radius?
> Thanks, David Finley
> 3659
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [1]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Gerry,
You only responded to me, not the list, IPSCO may have been the one
making correct curvature at one point, but not sure that is still the
case.
I believe the guy on Facebook is selling 3D printed ones, with the
advances in that area it's probably easy to replicate correctly now.
[1]https://www.facebook.com/photo?fbid=4902683189829725&set=pcb.2461299
847334790
Larry Stock also tells me he produces them.
Julian
__________________________________________________________________
From: GERRY ROMACK <gr2835 at comcast.net>
Sent: Tuesday, May 10, 2022 9:55 PM
To: Julian Kift <julian_kift at hotmail.com>
Subject: Re: [DeTomaso] Door Handle Bezel
IPSCO is the only one that made the correct fitting bezel. I would also
like a pair for my car since one is already cracked. When I talked to
him he said that he would need an order of 5 or six pairs in order to
make another run of them.
Keep me in the loop.
Gerry Romack
> On 05/10/2022 4:22 PM Julian Kift <julian_kift at hotmail.com> wrote:
>
>
> There's someone advertising the bezels on one of the De Tomaso
marketplace Facebook pages, those that have purchased seem very happy
with the product.
>
> Julian
>
> ________________________________
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
of David <david at msmcontractors.org>
> Sent: Tuesday, May 10, 2022 4:18 PM
> To: Detomaso List <detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Door Handle Bezel
>
> Well, my door handle bezel finally broke. Chuck Engles graciously
gave me an old spare. Unfortunately upon close observation I found
cracks. Decided to bite the bullet and order billet bezels from IPSCO.
They don't have any and said doesn't know if they will ever have
anymore. His had the proper radius so not to warp door skin. Called
Hall. She said call Wilkinson. Steve send two out. They have no
radius. Does anyone know where you can get bezels with the proper
radius?
> Thanks, David Finley
> 3659
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [2]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
> There's someone advertising the bezels on one of the De Tomaso
> marketplace Facebook pages, those that have purchased seem very
happy
> with the product.
>
> Julian
>
__________________________________________________________________
>
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on
behalf of
> David <david at msmcontractors.org>
> Sent: Tuesday, May 10, 2022 4:18 PM
> To: Detomaso List <detomaso at server.detomasolist.com>
> Subject: [DeTomaso] Door Handle Bezel
>
> Well, my door handle bezel finally broke. Chuck Engles graciously
gave
> me an old spare. Unfortunately upon close observation I found
cracks.
> Decided to bite the bullet and order billet bezels from IPSCO.
They
> don't have any and said doesn't know if they will ever have
anymore.
> His had the proper radius so not to warp door skin. Called Hall.
She
> said call Wilkinson. Steve send two out. They have no radius.
Does
> anyone know where you can get bezels with the proper radius?
> Thanks, David Finley
> 3659
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [1]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [3]http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [4]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://www.facebook.com/photo?fbid=4902683189829725&set=pcb.2461299847334790
2. http://server.detomasolist.com/mailman/listinfo/detomaso
3. http://server.detomasolist.com/mailman/listinfo/detomaso
4. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list