[DeTomaso] Holley Carb Air Cleaner Stud Hole Thread Repair
Doug Braun
doug351c at gmail.com
Wed Jul 27 12:20:43 EDT 2022
Asa,
My experience with Heli-coils tells me that there is not enough meat in the carb there to accept one.
I was hoping maybe someone has proved me wrong by experience.
Doug
-----Original Message-----
From: Asa Jay Laughton
Sent: Tuesday, July 26, 2022 9:28 PM
To: Doug Braun <doug351c at gmail.com>
Cc: Detomaso <detomaso at detomasolist.com>
Subject: Re: [DeTomaso] Holley Carb Air Cleaner Stud Hole Thread Repair
Hi Doug,
As I recall, the stud is threaded into the body of the carb, not the air horn. Are you looking at the correct item for possible helicoil? I would think (without having one here to look at currently) there should be enough metal there (in the body) to support a helicoil.
Just my four cents (adjusted for inflation) Asa Jay
Sent via radio waves
> On Jul 26, 2022, at 20:22, Doug Braun <doug351c at gmail.com> wrote:
>
> The threads in my Holley 4150 carb for the Air Cleaner Stud are
> stripped out.
> It doesn't look like there's enough metal there to install a Heli-Coil.
> Has anyone run into this before and found successful repair method?
> My only thought is J-B Weld.
>
> Doug Braun
> Blue 73L #5505
More information about the DeTomaso
mailing list