[DeTomaso] Installing 3-bolt Aerostar motors using Mike Dailey's 4-bolt install plan - questions
Jeff Detrich
jjdetrich at gmail.com
Sun Jul 17 23:01:34 EDT 2022
Have you checked the space city web site.
Jeff
On Thu, Jul 14, 2022 at 6:34 PM Mike & Elizabeth <mbefthomas2 at gmail.com>
wrote:
> Has anyone out there used Mike Dailey's installation guide on his
> website for the 4-bolt Aerostar motors to install a set of the 3-bolt
> motors?
>
>
> I've ordered and received a pair of 3-bolt motors from Autozone.
> Reason I ask is that the one bolt hole that his instructions say to use
> as the guide, the #2 bolt at the top of the gear housing, is the one
> missing from the 3-bolt motor. Also, his plan does not utilize the #4
> bolt, the one at the bottom closest to the drive shaft from the motor,
> since it has three others. In the 3-bolt install, I'll have to spec
> out where to drill for the #4 bolt as I doubt 2 bolts would be
> sufficient to secure the motor/drive gear assembly.
>
>
> I think I can make it happen but would appreciate any first-hand
> experience here.
>
>
> Thanks
>
> Mike Thomas
>
> 6328
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
Have you checked the space city web site.A
Jeff
On Thu, Jul 14, 2022 at 6:34 PM Mike & Elizabeth
<[1]mbefthomas2 at gmail.com> wrote:
A A Has anyone out there used Mike Dailey's installation guide on
his
A A website for the 4-bolt Aerostar motors to install a set of the
3-bolt
A A motors?
A A I've ordered and received a pair of 3-bolt motors from
Autozone.
A A Reason I ask is that the one bolt hole that his instructions
say to use
A A as the guide, the #2 bolt at the top of the gear housing, is
the one
A A missing from the 3-bolt motor.A Also, his plan does not
utilize the #4
A A bolt, the one at the bottom closest to the drive shaft from the
motor,
A A since it has three others.A In the 3-bolt install, I'll have
to spec
A A out where to drill for the #4 bolt as I doubt 2 bolts would be
A A sufficient to secure the motor/drive gear assembly.
A A I think I can make it happen but would appreciate any
first-hand
A A experience here.
A A Thanks
A A Mike Thomas
A A 6328
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at server.detomasolist.com
[3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:mbefthomas2 at gmail.com
2. mailto:DeTomaso at server.detomasolist.com
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list