[DeTomaso] Decklid Corner Bumpers
Mike & Elizabeth
mbefthomas2 at gmail.com
Sun Aug 28 15:12:33 EDT 2022
I have both pieces of your frame stiffening kit ready to install on the car when it goes back together (front nut plates are welded in). Thanks Larry
-----Original Message-----
From: Larry Stock <larrys at panteraparts.com>
Sent: Saturday, August 27, 2022 6:51 PM
To: Mike & Elizabeth <mbefthomas2 at gmail.com>; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Decklid Corner Bumpers
Please, don't spread fake news. The deck lid really isn't moving at all, it is the rear quarter panels that are moving into the Deck Lid.
A good chassis stiffening addition will stop all the deflection Larry Stock
On 8/27/22, 6:24 PM, "DeTomaso on behalf of Mike & Elizabeth" <detomaso-bounces at server.detomasolist.com on behalf of mbefthomas2 at gmail.com> wrote:
Some of you have welded in a small tab on the left and right side of
the back edge of the decklid and put a small rubber pad there to help
stabilize the decklid. What have you used for the rubber bumpers?
Will be doing the same thing to 6328 and 5505 as part of our
restoration.
Thanks
Mike Thomas & Doug Braun
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
More information about the DeTomaso
mailing list