[DeTomaso] Installing a cnc master clutch cylinder

[Larry Stock]

Problem is that when you hack off the bubble flare and make a new inverted flare, you can't go back to a bubble flare. We either don't have enough line left and it keeps splitting when we attempt to put a new Bubble flare back on the end and we end up replacing the entire clutch line to go back to stock.
Larry

On 8/13/22, 12:54 PM, "DeTomaso on behalf of Mike Drew via DeTomaso" <detomaso-bounces at server.detomasolist.com on behalf of detomaso at server.detomasolist.com> wrote:

    Chris,

    CNC has been out of business for years! Where did you get a new one?

    Most people don’t fuss with adapters. They just cut and reflare the line with a new fitting. 

    Personally I would get a proper master that fit both the car AND the existing line, rather than hacking the car (in admittedly an extremely minor way) to accommodate an old, obsolete and possibly questionable part…..

    Mike

    Sent from my iPad

    > On Aug 13, 2022, at 12:32, Christopher Kimball <chrisvkimball at msn.com> wrote:
    > 
    >    Hi, we are installing a CNC master clutch cylinder, and the we need a
    >   90 degree adapter that goes between the master cylinder and the line.
    >   What do people use for that? Thanks for your help! Sincerely, Chris
    > 
    >   Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable
    >   smartphone
    > _______________________________________________
    > 
    > 
    > Detomaso Email List is not managed by POCA
    > Posted emails must not exceed 1.5 Megabytes
    > DeTomaso mailing list
    > DeTomaso at server.detomasolist.com
    > http://server.detomasolist.com/mailman/listinfo/detomaso
    > 
    > To manage your subscription (change email address, unsubscribe, etc.) use the links above.
    > 
    > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

    _______________________________________________


    Detomaso Email List is not managed by POCA
    Posted emails must not exceed 1.5 Megabytes
    DeTomaso mailing list
    DeTomaso at server.detomasolist.com
    http://server.detomasolist.com/mailman/listinfo/detomaso

    To manage your subscription (change email address, unsubscribe, etc.) use the links above.

    Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.