[DeTomaso] 1972 Project Car on BaT
Mike & Elizabeth
mbefthomas2 at gmail.com
Sun Apr 10 13:37:18 EDT 2022
Even as a parts doner I don't think you'd get your money back. I'd hate to see what the ZF looks like inside.
Mike
-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Will Kooiman
Sent: Saturday, April 9, 2022 9:28 PM
To: gt40 at sbcglobal.net; Ken Green <kenn_green at yahoo.com>; Bill Cartus <bcartus at yahoo.com>; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] 1972 Project Car on BaT
Agreed. Stupidest number I've seen. The buyer is in for a very rude awakening.
On 4/9/22, 11:27 PM, "gt40 at sbcglobal.net" <gt40 at sbcglobal.net> wrote:
Pure Insanity! The numbers DON'T work!
John
-----Original Message-----
From: Ken Green via DeTomaso
Sent: Saturday, April 9, 2022 1:50 PM
To: Bill Cartus ; detomaso at server.detomasolist.com ; Will Kooiman
Subject: Re: [DeTomaso] 1972 Project Car on BaT
It sold for $33,333.
https://bringatrailer.com/listing/1972-detomaso-pantera-77/
I have 2 projects one nearly done, the other is stripped and needs metal
repair but nothing like the one that just sold. Looks like time to sell it.
I remember how cheap the cars we like were into the early 70's and then
prices exploded due to inflation.
Ken
On Saturday, April 9, 2022, 01:13:21 PM PDT, Will Kooiman
<will.kooiman at gmail.com> wrote:
Wow. I don't think I've seen a bigger rust bucket. It has rust holes in
the roof and floor, so at least the rain can go all the way through. The
only parts that don't look rusted are the glass, and maybe the rubber.
I thought it might be a good candidate to rebody - GT5-S or one of those car
shows where they turn it into a Frankenstein. But man - everything is
rusted.
That's the first time I've seen an engine access cover that looked like
that. Is that from an early car?
On 4/7/22, 6:35 PM, "DeTomaso on behalf of Bill Cartus via DeTomaso"
<detomaso-bounces at server.detomasolist.com on behalf of
detomaso at server.detomasolist.com> wrote:
Everyone, the 'rust bucket' project '72 Pantera currently listed on
BringATrailer is near me in the Atlanta area. I am trying to arrange
a
visit to see the car even though the seller is on vacation. If anyone
is interested in me looking for something specific or a picture that
was not provided on BaT, please email me (bcartus at yahoo.com) soon.
I'm
not interested in this car for myself, but will assist POCA folks that
might be.
Bill Cartus
#3633
On Thursday, April 7, 2022, 12:00:06 PM EDT,
detomaso-request at server.detomasolist.com
<detomaso-request at server.detomasolist.com> wrote:
Send DeTomaso mailing list submissions to
[1]detomaso at server.detomasolist.com
To subscribe or unsubscribe via the World Wide Web, visit
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
or, via email, send a message with subject or body 'help' to
[3]detomaso-request at server.detomasolist.com
You can reach the person managing the list at
[4]detomaso-owner at server.detomasolist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of DeTomaso digest..."
Daily Detomaso List Digest
Today's Topics:
1. A good deal on Lenox carbide blade hole saws for other tool
addicts (Ken Green)
2. GM 12SI Alternator Connection ??? (Steve Liebenow)
----------------------------------------------------------------------
Message: 1
Date: Wed, 6 Apr 2022 21:18:36 +0000 (UTC)
From: Ken Green <[5]kenn_green at yahoo.com>
To: Detomaso List <[6]detomaso at server.detomasolist.com>
Subject: [DeTomaso] A good deal on Lenox carbide blade hole saws for
other tool addicts
Message-ID: <[7]812887433.1433180.1649279916710 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
I bought some of these, good prices to buy 4 or more of them:
1 - LENOX Carbide Hole Saw: Choose from Various Sizes listed | eBay
|
|
|
| | |
|
|
|
| |
1 - LENOX Carbide Hole Saw: Choose from Various Sizes listed | eBay
Choose from Various Sizes listed 4 in (102mm). 3 & 3/4 in (95mm). 3 &
5/8 in (92mm). 3 & 1/2 in (89mm). 3 & 3/8 ...
|
|
|
-------------- next part --------------
I bought some of these, good prices to buy 4 or more of them:
[1]1 - LENOX Carbide Hole Saw: Choose from Various Sizes listed |
eBay
[ebay.png]
1 - LENOX Carbide Hole Saw: Choose from Various Sizes listed |
eBay
Choose from Various Sizes listed 4 in (102mm). 3 & 3/4 in (95mm).
3
&
5/8 in (92mm). 3 & 1/2 in (89mm). 3 & 3/8 ...
References
Visible links
1. [8]https://www.ebay.com/itm/254953581803
Hidden links:
3. [9]https://www.ebay.com/itm/254953581803
------------------------------
Message: 2
Date: Wed, 6 Apr 2022 23:23:45 +0000 (UTC)
From: Steve Liebenow <[10]steven.liebenow at att.net>
To: Detomaso List <[11]detomaso at server.detomasolist.com>
Subject: [DeTomaso] GM 12SI Alternator Connection ???
Message-ID: <[12]316043790.1954399.1649287425594 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
Guys,
Stumbling thru this "very easy" conversion......with absolutely no
instructions other than for mounting the new AC pump/alt bracket.????
Everything after that is free??? Free to find it wherever you
can.......?? I'll stop here for the moment.
Back history: I am removing a 130Amp Ford 3G alternator and installing
a 97A GM 12si version.?? No, I do not need all the amperage.......no
EFI, no big stereo.....
SO, down to the two terminals on the alternator.? #1 and #2.??? Bat+
is
pretty evident.......duh!
This is what I can glean from Google, but who knows how good their
search is these days....since I'm not looking to buy
anything.....grrrrr.....? I have this:
Terminal #1 appears to be for the dash lamp and will connect to the
Blue/Black(Stripe) wire formerly on the voltage regulator term "I" and
this needs to be "Key ON" not 100% of the time or it will drain your
battery......albeit slowly.???
Terminal #2 is the Voltage Sense and can be connected 100% of the time
(or Key ON only if you like) which I believe is a Yellow wire,
terminal
"A" from the old harness.
Regulator Terminals? S (Green/Red stripe) & F (Orange) are no longer
used. (internal stator windings and control)
If anyone can give me a thumbs up on this, it would come in handy
about
now.
Now I just need to find the damned new pigtail connector that I bought
a couple of days back, before I started tearing my car apart!!!???
It's
around here somewhere......? and I'm rearranging components on my
starter solenoid/coil panel to boot.? Need new room for heater hose
support and my inline rust filter!? I don't want my heater hoses
laying
on the alternator!
Thanks in advance!
Steve
-------------- next part --------------
Guys,
Stumbling thru this "very easy" conversion.....with absolutely no
instructions other than for mounting the new AC pump/alt bracket.
Everything after that is free? Free to find it wherever you
can....... I'll stop here for the moment.
Back history: I am removing a 130Amp Ford 3G alternator and
installing
a 97A GM 12si version. No, I do not need all the amperage.......no
EFI, no big stereo.....
SO, down to the two terminals on the alternator #1 and #2. Bat+
is
pretty evident.......duh!
This is what I can glean from Google, but who knows how good their
search is these days....since I'm not looking to buy
anything.....grrrrr..... I have this:
Terminal #1 appears to be for the dash lamp and will connect to the
Blue/Black(Stripe) wire formerly on the voltage regulator term "I"
and
this needs to be "Key ON" not 100% of the time or it will drain your
battery......albeit slowly.
Terminal #2 is the Voltage Sense and can be connected 100% of the
time
(or Key ON only if you like) which I believe is a Yellow wire,
terminal
"A" from the old harness.
Regulator Terminals S (Green/Red stripe) & F (Orange) are no longer
used. (internal stator windings and control)
If anyone can give me a thumbs up on this, it would come in handy
about
now.
Now I just need to find the damned new pigtail connector that I
bought
a couple of days back, before I started tearing my car apart!!!
It's
around here somewhere...... and I'm rearranging components on my
starter solenoid/coil panel to boot. Need new room for heater hose
support and my inline rust filter! I don't want my heater hoses
laying
on the alternator!
Thanks in advance!
Steve
------------------------------
Subject: Digest Footer
_______________________________________________
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[13]DeTomaso at server.detomasolist.com
[14]http://server.detomasolist.com/mailman/listinfo/detomaso
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
------------------------------
End of DeTomaso Digest, Vol 214, Issue 5
****************************************
References
1. mailto:detomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
3. mailto:detomaso-request at server.detomasolist.com
4. mailto:detomaso-owner at server.detomasolist.com
5. mailto:kenn_green at yahoo.com
6. mailto:detomaso at server.detomasolist.com
7. mailto:812887433.1433180.1649279916710 at mail.yahoo.com
8. https://www.ebay.com/itm/254953581803
9. https://www.ebay.com/itm/254953581803
10. mailto:steven.liebenow at att.net
11. mailto:detomaso at server.detomasolist.com
12. mailto:316043790.1954399.1649287425594 at mail.yahoo.com
13. mailto:DeTomaso at server.detomasolist.com
14. http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
More information about the DeTomaso
mailing list