[DeTomaso] Best tool for AN fittings?

Ken Green kenn_green at yahoo.com
Thu Sep 23 19:11:34 EDT 2021 

Can I believe Summit that these are really made in the US?  I don't mind paying more to help manufacturing jobs here.

Ken

    On Thursday, September 23, 2021, 02:29:38 PM PDT, Julian Kift <julian_kift at hotmail.com> wrote:  
 
   I have a set of the Summit Racing aluminum (anodized) wrenches and
  haven't scratched anything.

  [1]https://www.summitracing.com/parts/sum-900101

  Julian
    __________________________________________________________________

  From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
  Ken Green via DeTomaso <detomaso at server.detomasolist.com>
  Sent: Thursday, September 23, 2021 2:08 PM
  To: Detomaso List <detomaso at server.detomasolist.com>; James Coyne
  <tecnosound at hotmail.com>
  Subject: Re: [DeTomaso] Best tool for AN fittings?

  They all seem to be aluminum, but I think they can still scratch the
  anodizing.  There are adjustable "crescent" type wrenches with wide
  surfaces that look like they may be better:
  [2]https://www.ebay.com/itm/153034140765
  Then a good pair of vice jaws:
  [3]https://www.ebay.com/itm/353318714062
  Just wondering if anyone has experience with similar tools.
  Ken
      On Thursday, September 23, 2021, 01:43:06 PM PDT, James Coyne
  <tecnosound at hotmail.com> wrote:

      It looks like all the special AN fitting wrenches are made out of
    aluminum.
      __________________________________________________________________
    From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
  of
    Ken Green via DeTomaso <detomaso at server.detomasolist.com>
    Sent: Thursday, September 23, 2021 1:39 PM
    To: Detomaso List <detomaso at server.detomasolist.com>
    Subject: [DeTomaso] Best tool for AN fittings?
    Is there something that doesn't scratch the anodizing?
  _______________________________________________
  Detomaso Email List is not managed by POCA
  Posted emails must not exceed 1.5 Megabytes
  DeTomaso mailing list
  DeTomaso at server.detomasolist.com
  [4]http://server.detomasolist.com/mailman/listinfo/detomaso
  To manage your subscription (change email address, unsubscribe, etc.)
  use the links above.
  Members who post to this list grant license to the list to forward any
  message posted here to all past, current, or future members of the
  list. They also grant the list owner permission to maintain an archive
  or approve the archiving of list messages.

References

  1. https://www.summitracing.com/parts/sum-900101
  2. https://www.ebay.com/itm/153034140765
  3. https://www.ebay.com/itm/353318714062
  4. http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.  
-------------- next part --------------
   Can I believe Summit that these are really made in the US?  I don't
   mind paying more to help manufacturing jobs here.
   Ken

   On Thursday, September 23, 2021, 02:29:38 PM PDT, Julian Kift
   <julian_kift at hotmail.com> wrote:
     I have a set of the Summit Racing aluminum (anodized) wrenches and
     haven't scratched anything.
     [1][1]https://www.summitracing.com/parts/sum-900101
     Julian
       __________________________________________________________________
     From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on
   behalf of
     Ken Green via DeTomaso <[3]detomaso at server.detomasolist.com>
     Sent: Thursday, September 23, 2021 2:08 PM
     To: Detomaso List <[4]detomaso at server.detomasolist.com>; James Coyne
     <[5]tecnosound at hotmail.com>
     Subject: Re: [DeTomaso] Best tool for AN fittings?
     They all seem to be aluminum, but I think they can still scratch the
     anodizing.  There are adjustable "crescent" type wrenches with wide
     surfaces that look like they may be better:
     [2][6]https://www.ebay.com/itm/153034140765
     Then a good pair of vice jaws:
     [3][7]https://www.ebay.com/itm/353318714062
     Just wondering if anyone has experience with similar tools.
     Ken
         On Thursday, September 23, 2021, 01:43:06 PM PDT, James Coyne
     <[8]tecnosound at hotmail.com> wrote:
         It looks like all the special AN fitting wrenches are made out of
       aluminum.

   __________________________________________________________________
       From: DeTomaso <[9]detomaso-bounces at server.detomasolist.com> on
   behalf
     of
       Ken Green via DeTomaso <[10]detomaso at server.detomasolist.com>
       Sent: Thursday, September 23, 2021 1:39 PM
       To: Detomaso List <[11]detomaso at server.detomasolist.com>
       Subject: [DeTomaso] Best tool for AN fittings?
       Is there something that doesn't scratch the anodizing?
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [12]DeTomaso at server.detomasolist.com
     [4][13]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe, etc.)
     use the links above.
     Members who post to this list grant license to the list to forward
   any
     message posted here to all past, current, or future members of the
     list. They also grant the list owner permission to maintain an
   archive
     or approve the archiving of list messages.
   References
     1. [14]https://www.summitracing.com/parts/sum-900101
     2. [15]https://www.ebay.com/itm/153034140765
     3. [16]https://www.ebay.com/itm/353318714062
     4. [17]http://server.detomasolist.com/mailman/listinfo/detomaso
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [18]DeTomaso at server.detomasolist.com
   [19]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://www.summitracing.com/parts/sum-900101
   2. mailto:detomaso-bounces at server.detomasolist.com
   3. mailto:detomaso at server.detomasolist.com
   4. mailto:detomaso at server.detomasolist.com
   5. mailto:tecnosound at hotmail.com
   6. https://www.ebay.com/itm/153034140765
   7. https://www.ebay.com/itm/353318714062
   8. mailto:tecnosound at hotmail.com
   9. mailto:detomaso-bounces at server.detomasolist.com
  10. mailto:detomaso at server.detomasolist.com
  11. mailto:detomaso at server.detomasolist.com
  12. mailto:DeTomaso at server.detomasolist.com
  13. http://server.detomasolist.com/mailman/listinfo/detomaso
  14. https://www.summitracing.com/parts/sum-900101
  15. https://www.ebay.com/itm/153034140765
  16. https://www.ebay.com/itm/353318714062
  17. http://server.detomasolist.com/mailman/listinfo/detomaso
  18. mailto:DeTomaso at server.detomasolist.com
  19. http://server.detomasolist.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list