[DeTomaso] Clutch master cylinder seal
Doug Braun
doug351c at gmail.com
Thu Sep 9 22:53:11 EDT 2021
Jack,
I think this master is the one made by CNC but with a Pantera specific bolt spacing to fit the pedal box casting.
Doug
From: jderyke at aol.com
Sent: Thursday, September 9, 2021 7:43 PM
To: doug351c at gmail.com; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Clutch master cylinder seal
Doug, is that the aluminum long-throw cylinder that Pantera East used to sell? Who made the thing?
-----Original Message-----
From: Doug Braun <doug351c at gmail.com <mailto:doug351c at gmail.com> >
To: detomaso at server.detomasolist.com <mailto:detomaso at server.detomasolist.com>
Sent: Thu, Sep 9, 2021 7:15 pm
Subject: [DeTomaso] Clutch master cylinder seal
Guys,
Is there an off the shelf hydraulic seal that will fit the aluminum
aftermarket Clutch master cylinder (the one with the knurled, round,
aluminum cap). We have a Pantera that's broken down in Richland, WA on
the trip they're on with Panteras NW so then need it quick.
My cross reference only shows seals for the stock clutch master
cylinder.
Doug Braun
Blue 73L #5505
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Jack,
I think this master is the one made by CNC but with a Pantera specific
bolt spacing to fit the pedal box casting.
Doug
From: jderyke at aol.com
Sent: Thursday, September 9, 2021 7:43 PM
To: doug351c at gmail.com; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Clutch master cylinder seal
Doug, is that the aluminum long-throw cylinder that Pantera East used
to sell? Who made the thing?
-----Original Message-----
From: Doug Braun <[1]doug351c at gmail.com>
To: [2]detomaso at server.detomasolist.com
Sent: Thu, Sep 9, 2021 7:15 pm
Subject: [DeTomaso] Clutch master cylinder seal
Guys,
Is there an off the shelf hydraulic seal that will fit the aluminum
aftermarket Clutch master cylinder (the one with the knurled, round,
aluminum cap). We have a Pantera that's broken down in Richland, WA
on
the trip they're on with Panteras NW so then need it quick.
My cross reference only shows seals for the stock clutch master
cylinder.
Doug Braun
Blue 73L #5505
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[3]DeTomaso at server.detomasolist.com
[4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:doug351c at gmail.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list