[DeTomaso] Charlie needs a thrust plate!
Asa Jay Laughton
asajay at asajay.com
Thu Nov 18 10:19:59 EST 2021
I doubt it used the stock thrust plate. The plate needs to have a groove that fits the bearing in order to keep it in place.
https://asajay.com/351rebuild/timingset.htm
Asa Jay
Sent using Jedi Mind Tricks
> On Nov 18, 2021, at 03:15, Thomas Tornblom <thomas at hax.se> wrote:
>
> I use a Rollmaster double roller timing chain, which came with a torrington roller bearing. Can't remember the part number, but the gears were made in Australia and the chain in Germany
>
> https://www.ebay.com.au/itm/Rollmaster-Ford-302-351C-Dr-Timing-Chain-Set-Torrington-Nitrided-CS10060-/382716579159
>
> It still uses the stock thrust plate, IIRC.
>
> /Thomas
>
>> Den 2021-11-18 kl. 06:35, skrev Asa Jay Laughton via DeTomaso:
>> Personally, -this- is the way I went last time:
>> [1]https://www.summitracing.com/parts/cca-3122tb
>> Thrust -bearing-.
>> It took some additional work, but I really liked it versus just the
>> plain old plate. More expensive mind you, but as far as I know it held
>> up in my original race engine until Steve pushed it hard enough the
>> engine blew... but I bet the thrust plate bearing set was intact. :)
>> I also had a Pete Jackson gear drive set in there as I recall, the
>> "quiet" set you can't get anymore.
>> Asa Jay
>> Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
>> Spokane County ARES-RACES-ACS EC/RO
>> ******************************
>> [2]https://w7tsc.org
>> [3]https://www.teampanteraracing.com
>> On 11/17/2021 21:26, Thomas Toernblom wrote:
>> Hi Mike,
>> Check this out:
>> [1][4]https://www.tmeyerinc.com/product/thrust-plate/
>> /Thomas
>> 18 nov. 2021 kl. 02:58 skrev MICHAEL DREW via DeTomaso
>> [5]<detomaso at server.detomasolist.com>:
>> Will,
>> Yes. But not for the 351C. They only list two. One is $150! The other
>> is a package of 5....
>> Mike
>> Sent from my iPhone
>> On Nov 17, 2021, at 17:38, Will Kooiman [6]<will.kooiman at gmail.com>
>> wrote:
>> Hi Mike,
>> There are lots of them on summit.
>> Will.
>> Sent from my iPhone
>> On Nov 17, 2021, at 7:59 PM, MICHAEL DREW via DeTomaso
>> [7]<detomaso at server.detomasolist.com> wrote:
>> Hi guys,
>> I'm parts chasing for Charlie McCall who is having the worlds
>> longest engine build it seems. Now it seems he needs a thrust plate
>> for the cam (which begs the question: where did the old one go????).
>> I can only find them online in packages of five (which begs another
>> question: who needs FIVE thrust plates???)
>> I'm hoping somebody needed one, bought five and has four lying
>> around gathering dust?
>> If you have one available (or know where I can buy one for him)
>> please let me know.
>> Thanks!!!!
>> Mike
>> Sent from my iPhone
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [8]DeTomaso at server.detomasolist.com
>> [9]http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe,
>> etc.) use the links above.
>> Members who post to this list grant license to the list to forward
>> any message posted here to all past, current, or future members of
>> the list. They also grant the list owner permission to maintain an
>> archive or approve the archiving of list messages.
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [10]DeTomaso at server.detomasolist.com
>> [11]http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe, etc.)
>> use the links above.
>> Members who post to this list grant license to the list to forward any
>> message posted here to all past, current, or future members of the
>> list. They also grant the list owner permission to maintain an archive
>> or approve the archiving of list messages.
>> References
>> 1. [12]https://www.tmeyerinc.com/product/thrust-plate/
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [13]DeTomaso at server.detomasolist.com
>> [14]http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe, etc.) use the li
>> nks above.
>> Members who post to this list grant license to the list to forward any message p
>> osted here to all past, current, or future members of the list. They also grant
>> the list owner permission to maintain an archive or approve the archiving of lis
>> t messages.
>> References
>> 1. https://www.summitracing.com/parts/cca-3122tb
>> 2. https://w7tsc.org/
>> 3. https://www.teampanteraracing.com/
>> 4. https://www.tmeyerinc.com/product/thrust-plate/
>> 5. mailto:detomaso at server.detomasolist.com
>> 6. mailto:will.kooiman at gmail.com
>> 7. mailto:detomaso at server.detomasolist.com
>> 8. mailto:DeTomaso at server.detomasolist.com
>> 9. http://server.detomasolist.com/mailman/listinfo/detomaso
>> 10. mailto:DeTomaso at server.detomasolist.com
>> 11. http://server.detomasolist.com/mailman/listinfo/detomaso
>> 12. https://www.tmeyerinc.com/product/thrust-plate/
>> 13. mailto:DeTomaso at server.detomasolist.com
>> 14. http://server.detomasolist.com/mailman/listinfo/detomaso
>> !DSPAM:6195e63f37441687230787!
>> _______________________________________________
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>> !DSPAM:6195e63f37441687230787!
>
>
> --
> Real life: Thomas Törnblom Email: thomas at hax.se
> Snail mail: Banvallsvägen 14 Mobile: +46 76 209 8320
> S - 754 40 Uppsala, Sweden
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I doubt it used the stock thrust plate. The plate needs to have a
groove that fits the bearing in order to keep it in place.
[1]https://asajay.com/351rebuild/timingset.htm
Asa Jay
Sent using Jedi Mind Tricks
On Nov 18, 2021, at 03:15, Thomas Tornblom <thomas at hax.se> wrote:
I use a Rollmaster double roller timing chain, which came with a
torrington roller bearing. Can't remember the part number, but the
gears were made in Australia and the chain in Germany
https://www.ebay.com.au/itm/Rollmaster-Ford-302-351C-Dr-Timing-Chain-Se
t-Torrington-Nitrided-CS10060-/382716579159
It still uses the stock thrust plate, IIRC.
/Thomas
Den 2021-11-18 kl. 06:35, skrev Asa Jay Laughton via DeTomaso:
Personally, -this- is the way I went last time:
[1]https://www.summitracing.com/parts/cca-3122tb
Thrust -bearing-.
It took some additional work, but I really liked it versus just
the
plain old plate. More expensive mind you, but as far as I know
it held
up in my original race engine until Steve pushed it hard enough
the
engine blew... but I bet the thrust plate bearing set was intact.
:)
I also had a Pete Jackson gear drive set in there as I recall,
the
"quiet" set you can't get anymore.
Asa Jay
Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
Spokane County ARES-RACES-ACS EC/RO
******************************
[2]https://w7tsc.org
[3]https://www.teampanteraracing.com
On 11/17/2021 21:26, Thomas Toernblom wrote:
Hi Mike,
Check this out:
[1][4]https://www.tmeyerinc.com/product/thrust-plate/
/Thomas
18 nov. 2021 kl. 02:58 skrev MICHAEL DREW via DeTomaso
[5]<detomaso at server.detomasolist.com>:
Will,
Yes. But not for the 351C. They only list two. One is $150! The
other
is a package of 5....
Mike
Sent from my iPhone
On Nov 17, 2021, at 17:38, Will Kooiman
[6]<will.kooiman at gmail.com>
wrote:
Hi Mike,
There are lots of them on summit.
Will.
Sent from my iPhone
On Nov 17, 2021, at 7:59 PM, MICHAEL DREW via DeTomaso
[7]<detomaso at server.detomasolist.com> wrote:
Hi guys,
I'm parts chasing for Charlie McCall who is having the worlds
longest engine build it seems. Now it seems he needs a thrust
plate
for the cam (which begs the question: where did the old one
go????).
I can only find them online in packages of five (which begs
another
question: who needs FIVE thrust plates???)
I'm hoping somebody needed one, bought five and has four lying
around gathering dust?
If you have one available (or know where I can buy one for him)
please let me know.
Thanks!!!!
Mike
Sent from my iPhone
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[8]DeTomaso at server.detomasolist.com
[9]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to
forward
any message posted here to all past, current, or future members
of
the list. They also grant the list owner permission to maintain
an
archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[10]DeTomaso at server.detomasolist.com
[11]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
Members who post to this list grant license to the list to
forward any
message posted here to all past, current, or future members of
the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
References
1. [12]https://www.tmeyerinc.com/product/thrust-plate/
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[13]DeTomaso at server.detomasolist.com
[14]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the li
nks above.
Members who post to this list grant license to the list to forward
any message p
osted here to all past, current, or future members of the list. They
also grant
the list owner permission to maintain an archive or approve the
archiving of lis
t messages.
References
1. https://www.summitracing.com/parts/cca-3122tb
2. https://w7tsc.org/
3. https://www.teampanteraracing.com/
4. https://www.tmeyerinc.com/product/thrust-plate/
5. mailto:detomaso at server.detomasolist.com
6. mailto:will.kooiman at gmail.com
7. mailto:detomaso at server.detomasolist.com
8. mailto:DeTomaso at server.detomasolist.com
9. http://server.detomasolist.com/mailman/listinfo/detomaso
10. mailto:DeTomaso at server.detomasolist.com
11. http://server.detomasolist.com/mailman/listinfo/detomaso
12. https://www.tmeyerinc.com/product/thrust-plate/
13. mailto:DeTomaso at server.detomasolist.com
14. http://server.detomasolist.com/mailman/listinfo/detomaso
!DSPAM:6195e63f37441687230787!
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
!DSPAM:6195e63f37441687230787!
--
Real life: Thomas Toernblom Email: thomas at hax.se
Snail mail: Banvallsvaegen 14 Mobile: +46 76 209 8320
S - 754 40 Uppsala, Sweden
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://asajay.com/351rebuild/timingset.htm
More information about the DeTomaso
mailing list