[DeTomaso] 351C Steel Flywheel for Pantera

[Garth Rodericks]

 Or, feel free to share a part number/source for the correct flywheel. 
Thanks!


    On Tuesday, November 16, 2021, 09:33:31 AM PST, Garth Rodericks <garth_rodericks at yahoo.com> wrote:  
 
 Drawing on the collective wisdom of the group...
What is the correct size flywheel for a 351C flywheel in a Pantera?  Diameter & tooth count please.
My engine (which swallowed the air cleaner stud a few years ago) has a lightweight crankshaft and an aluminum flywheel and was a little too "herky-jerky" at low rpm speeds through a parking lot or in the neighborhood. Anyway, it's almost ready to go back into the Pantera and I'm thinking of changing to a steel flywheel which weighs in half-way between the aluminum Centerforce flywheel and the OEM cast iron flywheel, but I need to know the correct one to order for a Pantera that fits within the ZF bellhousing.
Thanks!
Garth#4033

  
-------------- next part --------------
   Or, feel free to share a part number/source for the correct flywheel.
   Thanks!

   On Tuesday, November 16, 2021, 09:33:31 AM PST, Garth Rodericks
   <garth_rodericks at yahoo.com> wrote:
   Drawing on the collective wisdom of the group...
   What is the correct size flywheel for a 351C flywheel in a Pantera?
   Diameter & tooth count please.
   My engine (which swallowed the air cleaner stud a few years ago) has a
   lightweight crankshaft and an aluminum flywheel and was a little too
   "herky-jerky" at low rpm speeds through a parking lot or in the
   neighborhood. Anyway, it's almost ready to go back into the Pantera and
   I'm thinking of changing to a steel flywheel which weighs in half-way
   between the aluminum Centerforce flywheel and the OEM cast iron
   flywheel, but I need to know the correct one to order for a Pantera
   that fits within the ZF bellhousing.
   Thanks!
   Garth
   #4033