[DeTomaso] How much does a ZF weigh?
Larry Weston
lplugw at hotmail.com
Wed Jun 16 07:51:07 EDT 2021
I've used YRC for ZF's twice and a few of sets of cylinder heads. As said below, service and rates are really good, particularly if you can drop off at the terminal, even better if your party can pick up at their end terminal.
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Julian Kift <julian_kift at hotmail.com>
Sent: Wednesday, June 16, 2021 1:03 AM
To: Larry Stock <larrys at panteraparts.com>; Mike & Elizabeth <mbefthomas2 at gmail.com>; 'Detomaso List' <detomaso at server.detomasolist.com>; Simon Vels <simonvels at kpnmail.nl>
Subject: Re: [DeTomaso] How much does a ZF weigh?
Just shipped the race car engine to Houston via YRC wooden crate on pallet 40Lx33Wx37H and 700lbs (didn't have scales with capacity so erred on side of caution) and it was $219. I thought that was damn good and it will be there Tuesday if I drop it to the terminal tomorrow.
Julian
________________________________
From: Larry Stock <larrys at panteraparts.com>
Sent: Monday, June 14, 2021 11:30 AM
To: Julian Kift <julian_kift at hotmail.com>; Mike & Elizabeth <mbefthomas2 at gmail.com>; 'Detomaso List' <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] How much does a ZF weigh?
Gear box is about 175, Our Wooden Crates are about 30 pounds, that's 205, they penalize if your underweight so say 225 if you put that on a small light pallet.
Mike's in Washington, where USF Reddaway is king of Northwest trucking
On 6/14/21, 11:24 AM, "DeTomaso on behalf of Julian Kift" <detomaso-bounces at server.detomasolist.com on behalf of julian_kift at hotmail.com> wrote:
I want to say shipping in a tough tote on a small pallet it was 190lbs
all in. I find YRC to be the lowest rate, dropping to a terminal helps
keeps cost down.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Mike & Elizabeth <mbefthomas2 at gmail.com>
Sent: Monday, June 14, 2021 10:51 AM
To: 'Detomaso List' <detomaso at server.detomasolist.com>
Subject: [DeTomaso] How much does a ZF weigh?
Working a quote for shipping a ZF and need to know how much they weigh.
Seems it's around 150 lbs.
Thanks, Mike Thomas
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I've used YRC for ZF's twice and a few of sets of cylinder heads. As
said below, service and rates are really good, particularly if you can
drop off at the terminal, even better if your party can pick up at
their end terminal.
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Julian Kift <julian_kift at hotmail.com>
Sent: Wednesday, June 16, 2021 1:03 AM
To: Larry Stock <larrys at panteraparts.com>; Mike & Elizabeth
<mbefthomas2 at gmail.com>; 'Detomaso List'
<detomaso at server.detomasolist.com>; Simon Vels <simonvels at kpnmail.nl>
Subject: Re: [DeTomaso] How much does a ZF weigh?
Just shipped the race car engine to Houston via YRC wooden crate on
pallet 40Lx33Wx37H and 700lbs (didn't have scales with capacity so
erred on side of caution) and it was $219. I thought that was damn good
and it will be there Tuesday if I drop it to the terminal tomorrow.
Julian
________________________________
From: Larry Stock <larrys at panteraparts.com>
Sent: Monday, June 14, 2021 11:30 AM
To: Julian Kift <julian_kift at hotmail.com>; Mike & Elizabeth
<mbefthomas2 at gmail.com>; 'Detomaso List'
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] How much does a ZF weigh?
Gear box is about 175, Our Wooden Crates are about 30 pounds, that's
205, they penalize if your underweight so say 225 if you put that on a
small light pallet.
Mike's in Washington, where USF Reddaway is king of Northwest trucking
On 6/14/21, 11:24 AM, "DeTomaso on behalf of Julian Kift"
<detomaso-bounces at server.detomasolist.com on behalf of
julian_kift at hotmail.com> wrote:
I want to say shipping in a tough tote on a small pallet it was
190lbs
all in. I find YRC to be the lowest rate, dropping to a terminal
helps
keeps cost down.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on
behalf of
Mike & Elizabeth <mbefthomas2 at gmail.com>
Sent: Monday, June 14, 2021 10:51 AM
To: 'Detomaso List' <detomaso at server.detomasolist.com>
Subject: [DeTomaso] How much does a ZF weigh?
Working a quote for shipping a ZF and need to know how much they
weigh.
Seems it's around 150 lbs.
Thanks, Mike Thomas
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[1]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list