[DeTomaso] ideas as to removing aluminum head
Daniel C Jones
daniel.c.jones2 at gmail.com
Mon Jan 18 11:16:57 EST 2021
Can you remove the studs? They are likely not allowing the head to move
laterally. Take out the studs and whack it with a big rubber mallet (or
even a hand sledge to a block of wood).
Dan Jones
On Mon, Jan 18, 2021 at 7:49 AM Steven Edwards <gsedwards at cox.net> wrote:
> Need some advice as to removal of the aluminum heads on a Fontana
> block. It looks like it has a Fel Pro head gasket.
>
> I have all the valve train off, and the nuts on the studs. The heads
> are firmly on. I have pride on them and took a dead blow plastic hammer
> to them.
>
> Nothing has worked and I am afraid to really pry on them, as to not
> damage the block or heads.
>
> I would appreciate any ideas as to breaking the suctions.
>
>
> Steven Edwards
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
Can you remove the studs?A They are likely not allowing the head to
move laterally.A Take out the studs and whack it with a big rubber
mallet (or even a hand sledge to a block of wood).
Dan Jones
On Mon, Jan 18, 2021 at 7:49 AM Steven Edwards <[1]gsedwards at cox.net>
wrote:
A A Need some advice as to removal of the aluminum heads on a
Fontana
A A block. It looks like it has a Fel Pro head gasket.
A A I have all the valve train off, and the nuts on the studs. The
heads
A A are firmly on. I have pride on them and took a dead blow
plastic hammer
A A to them.
A A Nothing has worked and I am afraid to really pry on them, as to
not
A A damage the block or heads.
A A I would appreciate any ideas as to breaking the suctions.
A A Steven Edwards
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at server.detomasolist.com
[3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:gsedwards at cox.net
2. mailto:DeTomaso at server.detomasolist.com
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list