[DeTomaso] USED MANGUSTA (mostly) Bits & Pieces- Clean out continues!

[Steve Liebenow]

Greetings,  the task of cleaning out the shelves/boxes continues.All first come first served.  Parts are used, but for a few new bits in this list as mentioned.
Thanks for looking! Steve
$35         AlternatorAdjusting Bracket for center mount Alt.
$25         Carello Taillamp wiring rubber boot- nice used!

$75         RH Taillens, NOS or good used….out of box.

$10        25mmdefroster hose, NEW,   for mid production cars, 20” long enuf for oneside, can’t find this in US..  (30mm usedother side)

$25         Brake/ClutchFluid Reservoir- original style with copper tubing stub on outlet, with cap.

$20         Veglia clockface (white letters) “Elettronico” and two pieces of clear plastic for makingnew lens.

$45         Box of wheelstuds 2- NEW late fronts, 2- NEW late rear, two early rear-used- 4 NEW Dorman610-312 front? Early???
$40ea     Hatch/hoodrelease handles (2)
$35        Door jambguide chrome pieces (2) with one rubber, screws   Rechrome for best looks.

10           NewIgnition Switch- Repop from ????  Iwouldn’t……

$75         UsedIgnition Switch/Black Bezel and “FIAT” key- action feels good, be sure to mountupside down!

$3           8 Dashlamps  3W #1815

$35         Shockabsorber adapters for QA1 “Chrome” shocks- Custom machined. 8 pieces to do twoshocks.

$25         Shockabsorber adapters for QA1 Proma Star shocks- Custom machined. 2 pieces to doone shock.

$10         Two usedfactory shock bushings, center displaced but would work for trans cross memberstill.

$5 ea     Wire junctionblocks, 1 each- small wire-medium-large   Multiple wire numbers accepted, like style used for  headlamp/horn/tail lamp junctions.

$10         Lucas “partsswitches 1-31780 for parts, 1- 334870B (fan switch originally) 

$4/ft      Green BrakeFluid hose- reservoirs to copper tubes and cylinders- NEW

$20         Box ofCable- 2 sizes NEW- hatch style latches (smaller) and e-brake cable (larger).3mm & 1mm

$200       TWO- Good LHdoor latch mechanisms and handle support posts.

$10         Lower engineblock plate-cut off at engine block- allows about .100” more ZF input shaftengagement.

$10         Insulationpad- original engine compartment “flip up” section.

$75         Headers- newbut need rework at flange to pipe areas- I think these may be first gen HallGoose attempt…… tubes interfere with studs or bolt installation.  Do not look like originals…more conventional.

$50         Midproduction brake balance valve- I believe Bonaldi- locked up.  Mounts to RH rear frame rail about enginearea.  

$10         23MM brakemaster cylinder “guts”. Seal holders and springs- Likely from late car or earlyPantera.

$120       PAIR- 1”Small Block Ford valve cover extensions, for clearing roller rockers ifneeded.  NEW

 

2/18 added

ZF parts- Input shaft/throw out bearing holder retainingbolts,   Input Shaft seal for pilotbearing  -1 only piece,   Selector shaft seal (shifter).

Windshield Washer bottle and pump assy by Lucas.   Scarfy from living in exhaust richenvironment!

Smog Pump from mid 900’s car. Entire assy, pump, pulley, regulator valve and holding bracket, air hoseto connect prior two items together, and special Goose mounting and adjustingbracket and bolts.   These parts otherthan Goose bracket are same as GT350 manual trans car and this affects pricing.

Radiator metal tubes (two curved front pieces)- reproductions.  New.

 

Parts of Unusual Status…..

Box of used parts….. half shaftbolts, ball joint bolts, hose clamps, ny-lock nuts from various parts, ZF nuts,used U-Joint clips

LH (2) and RH tail lamp lens- wereNOS until the earthquake dumped them off of my shelf…….good for display, lowerrear corners chipped, most have the pieces in the packaging still. 

Box of misc window guide/channel felts-materials and doorframe outer rubber pieces. I’d call these samples…..

Ford Taurus/Sable various waterhoses- I used 90 degree pieces (3/8”???)  to connect to heater core on the RH side ofdash where AC unit smashed up against heater core outlet……these are used and ofvarious sizes and shapes!

Two front used ball joints- multilayer type.

One AC condenser fan blade- oneblade busted off- rebalanced unprofessionally with nut and bolt…….

3- Used CLUTCH Master Cylinder kit(SP1995)- has good Dust Cover seals (over pushrod)

-------------- next part --------------
   Greetings,  the task of cleaning out the shelves/boxes continues.
   All first come first served.  Parts are used, but for a few new bits in
   this list as mentioned.
   Thanks for looking! Steve
   $35         Alternator Adjusting Bracket for center mount Alt.

   $25         Carello Tail lamp wiring rubber boot- nice used!

   $75         RH Tail lens, NOS or good useda|.out of box.

   $10        25mm defroster hose, NEW,   for mid production cars, 20a
   long enuf for one side, canat find this in US..  (30mm used other side)

   $25         Brake/Clutch Fluid Reservoir- original style with copper
   tubing stub on outlet, with cap.

   $20         Veglia clock face (white letters) aElettronicoa and two
   pieces of clear plastic for making new lens.

   $45         Box of wheel studs 2- NEW late fronts, 2- NEW late rear,
   two early rear-used- 4 NEW Dorman 610-312 front? Early???
   $40ea     Hatch/hood release handles (2)

   $35        Door jamb guide chrome pieces (2) with one rubber, screws
   Rechrome for best looks.

   10           New Ignition Switch- Repop from ????  I wouldnata|a|

   $75         Used Ignition Switch/Black Bezel and aFIATa key- action
   feels good, be sure to mount upside down!

   $3           8 Dash lamps  3W #1815

   $35         Shock absorber adapters for QA1 aChromea shocks- Custom
   machined. 8 pieces to do two shocks.

   $25         Shock absorber adapters for QA1 Proma Star shocks- Custom
   machined. 2 pieces to do one shock.

   $10         Two used factory shock bushings, center displaced but would
   work for trans cross member still.

   $5 ea     Wire junction blocks, 1 each- small wire-medium-large
   Multiple wire numbers accepted, like style used for  headlamp/horn/tail
   lamp junctions.

   $10         Lucas aparts switches 1-31780 for parts, 1- 334870B (fan
   switch originally)

   $4/ft      Green Brake Fluid hose- reservoirs to copper tubes and
   cylinders- NEW

   $20         Box of Cable- 2 sizes NEW- hatch style latches (smaller)
   and e-brake cable (larger). 3mm & 1mm

   $200       TWO- Good LH door latch mechanisms and handle support posts.

   $10         Lower engine block plate-cut off at engine block- allows
   about .100a more ZF input shaft engagement.

   $10         Insulation pad- original engine compartment aflip upa
   section.

   $75         Headers- new but need rework at flange to pipe areas- I
   think these may be first gen Hall Goose attempta|a| tubes interfere
   with studs or bolt installation.  Do not look like originalsa|more
   conventional.

   $50         Mid production brake balance valve- I believe Bonaldi-
   locked up.  Mounts to RH rear frame rail about engine area.

   $10         23MM brake master cylinder agutsa. Seal holders and
   springs- Likely from late car or early Pantera.

   $120       PAIR- 1a Small Block Ford valve cover extensions, for
   clearing roller rockers if needed.  NEW


   2/18 added

   ZF parts- Input shaft/throw out bearing holder retaining bolts,   Input
   Shaft seal for pilot bearing  -1 only piece,   Selector shaft seal
   (shifter).

   Windshield Washer bottle and pump assy by Lucas.   Scarfy from living
   in exhaust rich environment!

   Smog Pump from mid 900as car.  Entire assy, pump, pulley, regulator
   valve and holding bracket, air hose to connect prior two items
   together, and special Goose mounting and adjusting bracket and bolts.
   These parts other than Goose bracket are same as GT350 manual trans car
   and this affects pricing.

   Radiator metal tubes (two curved front pieces)- reproductions.  New.


   Parts of Unusual Statusa|..

   Box of used partsa|.. half shaft bolts, ball joint bolts, hose clamps,
   ny-lock nuts from various parts, ZF nuts, used U-Joint clips

   LH (2) and RH tail lamp lens- were NOS until the earthquake dumped them
   off of my shelfa|a|.good for display, lower rear corners chipped, most
   have the pieces in the packaging still.

   Box of misc window guide/channel felts- materials and doorframe outer
   rubber pieces. Iad call these samplesa|..

   Ford Taurus/Sable various water hoses- I used 90 degree pieces
   (3/8a???)  to connect to heater core on the RH side of dash where AC
   unit smashed up against heater core outleta|a|these are used and of
   various sizes and shapes!

   Two front used ball joints- multi layer type.

   One AC condenser fan blade- one blade busted off- rebalanced
   unprofessionally with nut and bolta|a|.

   3- Used CLUTCH Master Cylinder kit (SP1995)- has good Dust Cover seals
   (over pushrod)