[DeTomaso] To Drop or Not to Drop
B Hower
b.hower3400 at yahoo.com
Wed Apr 28 20:23:57 EDT 2021
I agree ... with comment that you can raise seats if you find them too low .... shim to desired height and know if you change seats you have the main item covered ...
3400 has dropped pans and Hall seats ... I am not as tall as Dr. but am long torso. I had to remove raised vent on top of helmet for roof clearance. And the head liner is against room .. with no sag. FWIW
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )
On Wednesday, April 28, 2021, 4:05:40 PM CDT, Will Kooiman <will.kooiman at gmail.com> wrote:
Drop 'em. It's an easy mod with few downsides.
It gives you more options if you decide to change seats later on.
If you don’t like how low they are, it's easy to raise them.
You can always drop them later on, but as long as you're in bare metal, now is the time to do it.
On 4/28/21, 2:18 PM, "DeTomaso on behalf of Charles Engles" <detomaso-bounces at server.detomasolist.com on behalf of cengles at cox.net> wrote:
Dear Mike,
Ah, an opinion question.
I am 6'4" and have just enough head room in both Panteras with
modifications that do not include lowering the floor pan. Decades ago, I got
to sit in a GT5. I remarked to the owner that it was so much roomier than
standard Panteras and he pointed out the factory dropped floor pans. I was
impressed by the improvement. I would say that it will give you more room
and comfort. Should you ever want to take to the track, the extra room for
the helmet is a plus. You'll have more choices of seats. Finally, there is
no better time to do it than while the car is on the rotisserie.
Warmest regards, Chuck Engles
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of Mike & Elizabeth
Sent: Wednesday, April 28, 2021 12:23 PM
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] To Drop or Not to Drop
OK, the forum has been pretty quiet lately so I'll throw this one out there.
Doug Braun and I are both having our cars restored at the same time by the
same guy. Doug has done a dropped floor pan for more clearance when he has
a helmet on but so far I'm not planning to do a drop. Since my car is in
bare metal right now and about to go on the rotisserie for all of the other
metal work, I'm wondering if I should reconsider while I have the
opportunity. Headroom for me has always been just 'adequate' and I do have
the seat springs removed from the bottom cushion of my C4 seats so I'm
basically sitting on the floor. I don't plan to track or autocross the car
so don't need helmet clearance but it would be nice to be able to consider a
seat upgrade sometime in the future if the C4's get old.
Thoughts . . .
Thanks, Mike Thomas
Panteras Northwest
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I agree ... with comment that you can raise seats if you find them too
low .... shim to desired height and know if you change seats you have
the main item covered ...
3400 has dropped pans and Hall seats ... I am not as tall as Dr. but am
long torso. I had to remove raised vent on top of helmet for roof
clearance. And the head liner is against room .. with no sag. FWIW
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
! )
On Wednesday, April 28, 2021, 4:05:40 PM CDT, Will Kooiman
<will.kooiman at gmail.com> wrote:
Drop 'em. It's an easy mod with few downsides.
It gives you more options if you decide to change seats later on.
If you donat like how low they are, it's easy to raise them.
You can always drop them later on, but as long as you're in bare metal,
now is the time to do it.
i>>?On 4/28/21, 2:18 PM, "DeTomaso on behalf of Charles Engles"
<[1]detomaso-bounces at server.detomasolist.com on behalf of
[2]cengles at cox.net> wrote:
Dear Mike,
Ah, an opinion question.
I am 6'4" and have just enough head room in both
Panteras with
modifications that do not include lowering the floor pan. Decades
ago, I got
to sit in a GT5. I remarked to the owner that it was so much
roomier than
standard Panteras and he pointed out the factory dropped floor
pans. I was
impressed by the improvement. I would say that it will give you
more room
and comfort. Should you ever want to take to the track, the extra
room for
the helmet is a plus. You'll have more choices of seats. Finally,
there is
no better time to do it than while the car is on the rotisserie.
Warmest regards, Chuck Engles
-----Original Message-----
From: DeTomaso [mailto:[3]detomaso-bounces at server.detomasolist.com]
On Behalf
Of Mike & Elizabeth
Sent: Wednesday, April 28, 2021 12:23 PM
To: [4]detomaso at server.detomasolist.com
Subject: [DeTomaso] To Drop or Not to Drop
OK, the forum has been pretty quiet lately so I'll throw this one
out there.
Doug Braun and I are both having our cars restored at the same time
by the
same guy. Doug has done a dropped floor pan for more clearance
when he has
a helmet on but so far I'm not planning to do a drop. Since my car
is in
bare metal right now and about to go on the rotisserie for all of
the other
metal work, I'm wondering if I should reconsider while I have the
opportunity. Headroom for me has always been just 'adequate' and I
do have
the seat springs removed from the bottom cushion of my C4 seats so
I'm
basically sitting on the floor. I don't plan to track or autocross
the car
so don't need helmet clearance but it would be nice to be able to
consider a
seat upgrade sometime in the future if the C4's get old.
Thoughts . . .
Thanks, Mike Thomas
Panteras Northwest
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[5]DeTomaso at server.detomasolist.com
[6]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[7]DeTomaso at server.detomasolist.com
[8]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:detomaso-bounces at server.detomasolist.com
2. mailto:cengles at cox.net
3. mailto:detomaso-bounces at server.detomasolist.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:DeTomaso at server.detomasolist.com
6. http://server.detomasolist.com/mailman/listinfo/detomaso
7. mailto:DeTomaso at server.detomasolist.com
8. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list