[DeTomaso] Gauge trim TIG project
Jeff Detrich
jjdetrich at gmail.com
Wed Apr 14 15:13:36 EDT 2021
Nice and great attention to detail.
Jeff
6559
On Wed, Apr 14, 2021 at 1:16 PM Larry Finch via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> All,
>
>
>
> Those of you with a good memory will recall a year ago I inquired about
> how to braze or weld the OEM chromed-brass gauge trim to create new trim
> for my new horizontal gauge panel. I had modified the fiberglass horizontal
> panel sold by Steve (for L-model cars) to allow it to correctly interface
> with my pre-L 2511 dash and console.
>
>
>
> I was able to locate a local one man welding shop who demonstrated his
> ability to TIG weld the channel, and I then proceeded to mix and match
> pieces to create the two portions of the trim.
>
>
>
> I created two aluminum “bucks” to hold the pieces in alignment for
> welding. 11 pieces, 10 welds.
>
>
>
> I then spent dozens of hours with 300 grit and needle files preparing the
> welds and trim for my chrome shop.
>
>
>
> The chrome came out beautiful and the finished installation will look
> stock to anyone not knowing any better. Which is exactly the result I was
> looking for.
>
>
>
> I love it when a plan comes together.
>
>
>
> Larry
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Sent from me using a magic, handheld electronic gizmo.
> _______________________________________________
>
>
>
>
>
> Detomaso Email List is not managed by POCA
>
> Posted emails must not exceed 1.5 Megabytes
>
> DeTomaso mailing list
>
> DeTomaso at server.detomasolist.com
>
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
>
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
Nice and great attention to detail.A
Jeff
6559
On Wed, Apr 14, 2021 at 1:16 PM Larry Finch via DeTomaso
<[1]detomaso at server.detomasolist.com> wrote:
All,
Those of you with a good memory will recall a year ago I inquired
about how to braze or weld the OEM chromed-brass gauge trim to
create new trim for my new horizontal gauge panel. I had modified
the fiberglass horizontal panel sold by Steve (for L-model cars) to
allow it to correctly interface with my pre-L 2511 dash and console.
I was able to locate a local one man welding shop who demonstrated
his ability to TIG weld the channel, and I then proceeded to mix and
match pieces to create the two portions of the trim.
I created two aluminum abucksa to hold the pieces in alignment for
welding. 11 pieces, 10 welds.
I then spent dozens of hours with 300 grit and needle files
preparing the welds and trim for my chrome shop.
The chrome came out beautiful and the finished installation will
look stock to anyone not knowing any better. Which is exactly the
result I was looking for.
I love it when a plan comes together.
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at server.detomasolist.com
[3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:detomaso at server.detomasolist.com
2. mailto:DeTomaso at server.detomasolist.com
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list