[DeTomaso] Stock steering wheel removal question

[MICHAEL DREW]

Dennis,

First, spray liberally with penetrant like PB Blaster. (Be sure to have something underneath to prevent dripping on the carpet).

The center of the shaft has a divot which will accept the end of a pointed punch. Have Liz sit in the seat and apply steady pulling pressure to pull the wheel towards her. Use a hammer and punch and give the shaft a few stout whacks and it will likely pull right off. 

Don’t get too exuberant with your backswing or you will knock her teeth out, and that’s unlikely to end well....:)

Mike

Sent from my iPad

> On Oct 20, 2020, at 17:03, Dennis Valdez via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
> Hello everyone, I hope you’re staying safe and these strange times.
> 
> I would like to send my stock steering wheel off to get re-wrapped in new leather.  
> 
> I have taken the pad off and the three screws that hold the trim on the backside off.  I have also removed the 22 mm center nut. 
> 
> The steering wheel will not slide off of the splines. Do I need to use a puller, or is there a step that I have missed ?
> 
> Thanks for the help!
> 
> Dennis Valdez
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.