[DeTomaso] aluminum stuck in file
steve at snclocks.com
steve at snclocks.com
Tue Nov 24 18:56:49 EST 2020
Old rifle bullet work well, same principal. But the brass is a little stiffer.
Stephen Nelson
-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Rich Hoppe
Sent: Tuesday, November 24, 2020 3:23 PM
To: detomaso at detomasolist.com
Subject: [DeTomaso] aluminum stuck in file
Just wanted to pass on a new thing I learned today.
Many of you have probably already done this or similar.
My favorite file has had aluminum stuck in the teeth.
Nothing seemed to work to get it out.
I learned that you can take a piece of copper tubing and on one end open it up and make it flat.
Then you push the copper tubing back and forth in line with the groves.
As the copper goes through it makes teeth in the copper that line up with the groves of the file and pushes the aluminum out.
Made me happy.
Rich Hoppe
More information about the DeTomaso
mailing list