[DeTomaso] NPC separating CV from CV half shaft?
Julian Kift
julian_kift at hotmail.com
Sun May 24 10:07:38 EDT 2020
Ken,
Correct the splined inner race is held on with a circlip, removal then allows full disassembly of the joint.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Sent: Saturday, May 23, 2020 2:28 PM
To: DeTomaso Mail List <detomaso at server.detomasolist.com>
Subject: [DeTomaso] NPC separating CV from CV half shaft?
Been looking for info on how an outer CV separates from the axle. It looks like the outer CV just slides over the axle and an outside snap ring in a groove in the axle limits how far the axle can go into the CV. Does that sound correct?
Ken
-------------- next part --------------
Ken,
Correct the splined inner race is held on with a circlip, removal then
allows full disassembly of the joint.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Sent: Saturday, May 23, 2020 2:28 PM
To: DeTomaso Mail List <detomaso at server.detomasolist.com>
Subject: [DeTomaso] NPC separating CV from CV half shaft?
Been looking for info on how an outer CV separates from the axle. It
looks like the outer CV just slides over the axle and an outside snap
ring in a groove in the axle limits how far the axle can go into the
CV. Does that sound correct?
Ken
More information about the DeTomaso
mailing list