[DeTomaso] Transaxle - Lost reverse gear
Larry Finch
fresnofinches at aol.com
Thu Jul 16 04:19:19 EDT 2020
All,
Some years ago I had RBT install a .620 gear set and I noticed no difference in transaxle noise
However, upon installation of the transaxle I found that the only way to keep from jumping out of reverse gear was to manually hold the shifter firmly in the reverse position.
Of course I troubleshot it thoroughly, eventually getting to the point where no linkage was connected, the selector box housing was totally removed, and a pair of vise grips used to solidly move the transaxle into reverse as far as possible.
No joy.
Talking a couple of times to Lloyd provided no further tips or explanations.
John Buckman and Ron McCall both presented what turned out to be the answer to the problem.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 45085 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20200716/7d83176a/attachment.jpeg>
-------------- next part --------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 32417 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20200716/7d83176a/attachment-0001.jpeg>
-------------- next part --------------
Thought I would share this so it can hopefully be retained in group memory to help someone in the future.
Larry
Sent from me using a magic, handheld electronic gizmo.
More information about the DeTomaso
mailing list