[DeTomaso] Carburator
Erik Kolstoe
ekolstoe at gmail.com
Thu Aug 27 14:42:18 EDT 2020
All I can say is what was happening on my car. I had a 1/2" aluminum riser
plate and a stock air cleaner which allowed for full range of the throttle
linkage, but the air cleaner interfered.with the engine cover. I have
since replaced the intake manifold and the air cleaner and went with an
edelbrock manifold and a 2 1/5 in. air filter and it still, just barely
interfered with the engine cover, only just. I then purchased an air
cleaner bottom with the max amount of drop, and the whole assembly finally
fits, but only just.
>From what I experienced on my car, the stock manifold will absolutely not
work with a Holley without a spacer. I tried a 1/4" spacer and the
butterflies still interfered with the secondary castings. I had to use the
1/2" riser. which pushed everything up too far. And that included trying
to use the stock air cleaner or the aftermarket air cleaner with the
higher drop pan bottom and the 2.5" filter element. I'm curious as to how
this all works on Dennis's car, but he has an Edelbrock carburetor and
maybe it does not have as tall of a profile. Not sure.
That is the info that I have, for what it is worth.
On Wed, Aug 26, 2020 at 3:40 PM Mike Drew <MikeLDrew at aol.com> wrote:
> The solid center section engine covers aren't raised. They are exactly the
> same height at the back. The front sticks up a bit relative to the mesh
> screens but that's not really relevant. The air cleaner is higher at the
> rear because of the slope of the intake pad and the height at the rear is
> the same.
>
> Mike
>
> Sent from my iPhone
>
> > On Aug 26, 2020, at 15:03, Dennis Valdez via DeTomaso <
> detomaso at server.detomasolist.com> wrote:
> >
> > Erik,
> >
> > I'll check and report back
> > Dennis Valdez
> >
> > On Aug 26, 2020, at 8:56 AM, Erik Kolstoe <ekolstoe at gmail.com>
> > wrote:
> >
> > Ahh yes. Your's is a 74 with the raised engine cover. Mine is a Pre-L
> > and sits much lower. What size is the spacer? 1/4 or 1/2"?
> > On Tue, Aug 25, 2020 at 9:55 PM Dennis Valdez via DeTomaso
> > <[1]detomaso at server.detomasolist.com> wrote:
> >
> > My car has the stock Manifold. The original Motorcraft carb was
> > replaced with an Edelbrock 650cfm Thunder Series 1806. There is
> > an
> > adapter used and the stock air cleaner does fit under the engine
> > cover.
> > Cheers, Dennis
> > [cid:F17DA68A-7485-4F23-B24D-216CFB8C64C0-L0-001]
> > Dennis Valdez
> > On Aug 23, 2020, at 5:04 PM, fred <[2]fred at creekspeak.com>
> > wrote:
> > Is there a modern carburetor that will fit on a stock 351
> > intake
> > manifold? Please email me. Thanks, Fred
> > Sent from Samsung tablet.
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [3]DeTomaso at server.detomasolist.com
> > [4]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> > etc.)
> > use the links above.
> > Members who post to this list grant license to the list to
> > forward any
> > message posted here to all past, current, or future members of
> > the
> > list. They also grant the list owner permission to maintain an
> > archive
> > or approve the archiving of list messages.
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [5]DeTomaso at server.detomasolist.com
> > [6]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> > etc.) use the links above.
> > Members who post to this list grant license to the list to forward
> > any message posted here to all past, current, or future members of
> > the list. They also grant the list owner permission to maintain an
> > archive or approve the archiving of list messages.
> >
> > References
> >
> > 1. mailto:detomaso at server.detomasolist.com
> > 2. mailto:fred at creekspeak.com
> > 3. mailto:DeTomaso at server.detomasolist.com
> > 4. http://server.detomasolist.com/mailman/listinfo/detomaso
> > 5. mailto:DeTomaso at server.detomasolist.com
> > 6. http://server.detomasolist.com/mailman/listinfo/detomaso
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
-------------- next part --------------
All I can say is what was happening on my car. I had a 1/2" aluminum
riser plate and a stock air cleaner which allowed for full range of the
throttle linkage, but the air cleaner interfered.with the
engineA cover.A I have since replacedA the intake manifold and the air
cleaner and went with an edelbrock manifold and a 2 1/5 in. air filter
and it still, just barely interferedA with the engine cover, only just.
I then purchasedA an air cleanerA bottomA with the max amount of drop,
and the whole assembly finally fits, but only just.
From what I experienced on my car, the stock manifold will
absolutelyA not work with a Holley without a spacer. I tried a 1/4"
spacer and the butterflies still interferedA with the secondary
castings. I had to use the 1/2" riser. whichA pushed everything up too
far.A And that included trying to use the stock air cleanerA or the
aftermarket air cleaner with the higherA drop pan bottom and the 2.5"
filter element. I'm curious as to how this all works on Dennis's car,
but he has an EdelbrockA carburetor and maybe it does not have as tall
of a profile. Not sure.
That is the info that I have, for what it is worth.
On Wed, Aug 26, 2020 at 3:40 PM Mike Drew <[1]MikeLDrew at aol.com> wrote:
The solid center section engine covers aren't raised. They are
exactly the same height at the back. The front sticks up a bit
relative to the mesh screens but that's not really relevant. The air
cleaner is higher at the rear because of the slope of the intake pad
and the height at the rear is the same.
Mike
Sent from my iPhone
> On Aug 26, 2020, at 15:03, Dennis Valdez via DeTomaso
<[2]detomaso at server.detomasolist.com> wrote:
>
>A A Erik,
>
>A A I'll check and report back
>A A Dennis Valdez
>
>A A A On Aug 26, 2020, at 8:56 AM, Erik Kolstoe
<[3]ekolstoe at gmail.com>
>A A A wrote:
>
>A A Ahh yes. Your's is a 74 with the raised engine cover. Mine is
a Pre-L
>A A and sits much lower. What size is the spacer? 1/4 or 1/2"?
>A A On Tue, Aug 25, 2020 at 9:55 PM Dennis Valdez via DeTomaso
>A A <[1][4]detomaso at server.detomasolist.com> wrote:
>
>A A A A My car has the stock Manifold. The original Motorcraft
carb was
>A A A A replaced with an Edelbrock 650cfm Thunder Series 1806.
There is
>A A A an
>A A A A adapter used and the stock air cleaner does fit under
the engine
>A A A A cover.
>A A A A Cheers, Dennis
>A A A A [cid:F17DA68A-7485-4F23-B24D-216CFB8C64C0-L0-001]
>A A A A Dennis Valdez
>A A A A A On Aug 23, 2020, at 5:04 PM, fred
<[2][5]fred at creekspeak.com>
>A A A wrote:
>A A A A A Is there a modern carburetorA that will fit on a
stock 351
>A A A intake
>A A A A A manifold? PleaseA email me. Thanks,A Fred
>A A A A A Sent from Samsung tablet.
>A A A A _______________________________________________
>A A A A Detomaso Email List is not managed by POCA
>A A A A Posted emails must not exceed 1.5 Megabytes
>A A A A DeTomaso mailing list
>A A A A [3][6]DeTomaso at server.detomasolist.com
>A A A A
[4][7]http://server.detomasolist.com/mailman/listinfo/detomaso
>A A A A To manage your subscription (change email address,
unsubscribe,
>A A A etc.)
>A A A A use the links above.
>A A A A Members who post to this list grant license to the list
to
>A A A forward any
>A A A A message posted here to all past, current, or future
members of
>A A A the
>A A A A list. They also grant the list owner permission to
maintain an
>A A A archive
>A A A A or approve the archiving of list messages.
>A A A _______________________________________________
>A A A Detomaso Email List is not managed by POCA
>A A A Posted emails must not exceed 1.5 Megabytes
>A A A DeTomaso mailing list
>A A A [5][8]DeTomaso at server.detomasolist.com
>A A
A [6][9]http://server.detomasolist.com/mailman/listinfo/detomaso
>A A A To manage your subscription (change email address,
unsubscribe,
>A A A etc.) use the links above.
>A A A Members who post to this list grant license to the list to
forward
>A A A any message posted here to all past, current, or future
members of
>A A A the list. They also grant the list owner permission to
maintain an
>A A A archive or approve the archiving of list messages.
>
> References
>
>A A 1. mailto:[10]detomaso at server.detomasolist.com
>A A 2. mailto:[11]fred at creekspeak.com
>A A 3. mailto:[12]DeTomaso at server.detomasolist.com
>A A 4.
[13]http://server.detomasolist.com/mailman/listinfo/detomaso
>A A 5. mailto:[14]DeTomaso at server.detomasolist.com
>A A 6.
[15]http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [16]DeTomaso at server.detomasolist.com
> [17]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:MikeLDrew at aol.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:ekolstoe at gmail.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:fred at creekspeak.com
6. mailto:DeTomaso at server.detomasolist.com
7. http://server.detomasolist.com/mailman/listinfo/detomaso
8. mailto:DeTomaso at server.detomasolist.com
9. http://server.detomasolist.com/mailman/listinfo/detomaso
10. mailto:detomaso at server.detomasolist.com
11. mailto:fred at creekspeak.com
12. mailto:DeTomaso at server.detomasolist.com
13. http://server.detomasolist.com/mailman/listinfo/detomaso
14. mailto:DeTomaso at server.detomasolist.com
15. http://server.detomasolist.com/mailman/listinfo/detomaso
16. mailto:DeTomaso at server.detomasolist.com
17. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list