[DeTomaso] Best jacking points for floor jack?

Wed Aug 19 11:04:10 EDT 2020

Very nice.
Do I see a tow/tie down point up front? How about the back?
Something for the ramp truck to use?

________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Joseph F Byrd, Jr <byrdjf at embarqmail.com>
Sent: Wednesday, August 19, 2020 12:16 AM
To: 'Detomaso List' <DeTomaso at server.detomasolist.com>
Cc: 'Ken Green' <kenn_green at yahoo.com>
Subject: Re: [DeTomaso] Best jacking points for floor jack?

-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of Mike Drew via DeTomaso
Sent: Tuesday, August 18, 2020 11:29 PM
To: Julian Kift <julian_kift at hotmail.com>
Cc: DeTomaso Mail List <detomaso at server.detomasolist.com>; Ken Green <kenn_green at yahoo.com>
Subject: Re: [DeTomaso] Best jacking points for floor jack?

Julian,

Yes, that’s right. When in doubt, read the manual. :)

I also jack from the rear crossmember, protecting the sheetmetal lip by putting a 2x4 on top of the jack pad which indexes on the frame rail.

Mike

Sent from my iPad

> On Aug 18, 2020, at 19:24, Julian Kift < <mailto:julian_kift at hotmail.com> julian_kift at hotmail.com> wrote:

>

>    I thought the holes in the chassis rails (just behind the front wheel

>   fender well and at the rear just in front of where the chassis rails

>   angle toward the engine mounts) were there as a keyway for the stock

>   scissor jack to sit in?

>

>   Julian

>     __________________________________________________________________

>

>   From: DeTomaso < <mailto:detomaso-bounces at server.detomasolist.com> detomaso-bounces at server.detomasolist.com> on behalf of

>   Ken Green via DeTomaso < <mailto:detomaso at server.detomasolist.com> detomaso at server.detomasolist.com>

>   Sent: Tuesday, August 18, 2020 6:21 PM

>   To: DeTomaso Mail List < <mailto:detomaso at server.detomasolist.com> detomaso at server.detomasolist.com>

>   Subject: [DeTomaso] Best jacking points for floor jack?

>

>   Anyone have a chart?

>   Thanks

> _______________________________________________

>

>

> Detomaso Email List is not managed by POCA Posted emails must not

> exceed 1.5 Megabytes DeTomaso mailing list

>  <mailto:DeTomaso at server.detomasolist.com> DeTomaso at server.detomasolist.com

>  <http://server.detomasolist.com/mailman/listinfo/detomaso> http://server.detomasolist.com/mailman/listinfo/detomaso

>

> To manage your subscription (change email address, unsubscribe, etc.) use the links above.

>

> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

_______________________________________________

Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list  <mailto:DeTomaso at server.detomasolist.com> DeTomaso at server.detomasolist.com  <http://server.detomasolist.com/mailman/listinfo/detomaso> http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-------------- next part --------------
   Very nice.

   Do I see a tow/tie down point up front? How about the back?

   Something for the ramp truck to use?
     __________________________________________________________________

   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
   Joseph F Byrd, Jr <byrdjf at embarqmail.com>
   Sent: Wednesday, August 19, 2020 12:16 AM
   To: 'Detomaso List' <DeTomaso at server.detomasolist.com>
   Cc: 'Ken Green' <kenn_green at yahoo.com>
   Subject: Re: [DeTomaso] Best jacking points for floor jack?

   -----Original Message-----
   From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of
   Mike Drew via DeTomaso
   Sent: Tuesday, August 18, 2020 11:29 PM
   To: Julian Kift <julian_kift at hotmail.com>
   Cc: DeTomaso Mail List <detomaso at server.detomasolist.com>; Ken Green
   <kenn_green at yahoo.com>
   Subject: Re: [DeTomaso] Best jacking points for floor jack?

   Julian,

   Yes, that's right. When in doubt, read the manual. :)

   I also jack from the rear crossmember, protecting the sheetmetal lip by
   putting a 2x4 on top of the jack pad which indexes on the frame rail.

   Mike

   Sent from my iPad

   > On Aug 18, 2020, at 19:24, Julian Kift <
   <[1]mailto:julian_kift at hotmail.com> julian_kift at hotmail.com> wrote:
   >
   >    I thought the holes in the chassis rails (just behind the front
   wheel
   >   fender well and at the rear just in front of where the chassis
   rails
   >   angle toward the engine mounts) were there as a keyway for the
   stock
   >   scissor jack to sit in?
   >
   >   Julian
   >
   __________________________________________________________________
   >
   >   From: DeTomaso <
   <[2]mailto:detomaso-bounces at server.detomasolist.com>
   detomaso-bounces at server.detomasolist.com> on behalf of
   >   Ken Green via DeTomaso <
   <[3]mailto:detomaso at server.detomasolist.com>
   detomaso at server.detomasolist.com>
   >   Sent: Tuesday, August 18, 2020 6:21 PM
   >   To: DeTomaso Mail List <
   <[4]mailto:detomaso at server.detomasolist.com>
   detomaso at server.detomasolist.com>
   >   Subject: [DeTomaso] Best jacking points for floor jack?
   >
   >   Anyone have a chart?
   >   Thanks
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA Posted emails must not
   > exceed 1.5 Megabytes DeTomaso mailing list
   >  <[5]mailto:DeTomaso at server.detomasolist.com>
   DeTomaso at server.detomasolist.com
   >  <[6]http://server.detomasolist.com/mailman/listinfo/detomaso>
   [7]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

   _______________________________________________

   Detomaso Email List is not managed by POCA Posted emails must not
   exceed 1.5 Megabytes DeTomaso mailing list
   <[8]mailto:DeTomaso at server.detomasolist.com>
   DeTomaso at server.detomasolist.com
   <[9]http://server.detomasolist.com/mailman/listinfo/detomaso>
   [10]http://server.detomasolist.com/mailman/listinfo/detomaso

   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.

   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:julian_kift at hotmail.com
   2. mailto:detomaso-bounces at server.detomasolist.com
   3. mailto:detomaso at server.detomasolist.com
   4. mailto:detomaso at server.detomasolist.com
   5. mailto:DeTomaso at server.detomasolist.com
   6. http://server.detomasolist.com/mailman/listinfo/detomaso
   7. http://server.detomasolist.com/mailman/listinfo/detomaso
   8. mailto:DeTomaso at server.detomasolist.com
   9. http://server.detomasolist.com/mailman/listinfo/detomaso
  10. http://server.detomasolist.com/mailman/listinfo/detomaso