[DeTomaso] “Rubber” muffler isolators
Larry Stock
larrys at panteraparts.com
Sat Nov 2 19:57:09 EDT 2019
Hi Asa,
The ones you got came from Hall who made these muffler hangers and Engine Mounts from Polyurethane that melts at about 350 degree F. My LH engine mounts did the same thing and coated the Aluminum casting and frame in black urethane.
Larry Stock
On 11/2/19, 12:56 PM, "DeTomaso on behalf of Asa Jay Laughton" <detomaso-bounces at server.detomasolist.com on behalf of asajay at asajay.com> wrote:
I was once given a new hanger for my Pantera when I first got it, and it
proceeded to "melt" over the course of a couple long trips. The bottom
bolt closest to the muffler was starting to break through. This was of
course unacceptable. I purchased new real-rubber hangers and they far
outlasted that weird one. I never had to change them again, even after
three Silver State runs at high-speed.
I don't know the vendor the bad one originally came from, but if the
hanger you have isn't flexible, I wouldn't trust it. Or maybe apply
some high-heat (no flame) to it and see how it holds up before you use
it. But then again... if it melts, your out the cost of the hanger.
Maybe buy another one, or two, like Mike Drew indicates. They're cheap
enough.
Asa Jay
Asa Jay Laughton - W7TSC, MSgt, USAFR, Retired
Spokane County ARES-RACES-ACS EC/RO
******************************
http://w7tsc.org
http://www.teampanteraracing.com
On 11/1/2019 21:40, Larry Finch via DeTomaso wrote:
> All,
>
> Today I received two new “rubber” isolators, designed to allow some flex in the muffler mounting, from Steve.
>
> They may be made out of rubber, but I could seriously get close to the same flexibility from a billet piece of aluminum the same size. These things have essentially ..... no ..... twist or flex in any direction.
>
> Have any of you purchased these isolators from other vendors and received a better functioning product?
>
> Thanks in advance,
>
> Larry
>
> Sent from me using a magic, handheld electronic gizmo.
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
More information about the DeTomaso
mailing list