[DeTomaso] Distributor / Radio Plate
Pantdino
pantdino at aol.com
Sat Mar 9 02:26:37 EST 2019
I believe I got a black plastic radio slot blanking plate from Steve Wilkinson and glued a small logo patch on it. IIRC it was plain as it came from him.
Jim
-----Original Message-----
From: Richard Greenblum <richard at richardgreenblum.com>
To: detomaso <detomaso at detomasolist.com>
Sent: Fri, Mar 8, 2019 11:26 am
Subject: [DeTomaso] Distributor / Radio Plate
Listers,
Does anyone have any experience with the Holley Hyperspark distributor? I'm
considering using the Sniper system on my new engine and would like to use
their distributor but I'm concerned it won't have enough clearance at the
bulkhead or the engine screen. Mine is a '74 which I think has a little
more room than the earlier cars, but don't remember for sure. Holley sent
me the dimensions so I'm going to use them to try to estimate the spacing.
Also, who sells good radio (delete) plates these days--I want to remove my
old Alpine radio which isn't even connected to anything anymore...
Thanks,
Richard
Austin, TX
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I believe I got a black plastic radio slot blanking plate from Steve
Wilkinson and glued a small logo patch on it. IIRC it was plain as it
came from him.
Jim
-----Original Message-----
From: Richard Greenblum <richard at richardgreenblum.com>
To: detomaso <detomaso at detomasolist.com>
Sent: Fri, Mar 8, 2019 11:26 am
Subject: [DeTomaso] Distributor / Radio Plate
Listers,
Does anyone have any experience with the Holley Hyperspark
distributor? I'm
considering using the Sniper system on my new engine and would like to
use
their distributor but I'm concerned it won't have enough clearance at
the
bulkhead or the engine screen. Mine is a '74 which I think has a
little
more room than the earlier cars, but don't remember for sure. Holley
sent
me the dimensions so I'm going to use them to try to estimate the
spacing.
Also, who sells good radio (delete) plates these days--I want to remove
my
old Alpine radio which isn't even connected to anything anymore...
Thanks,
Richard
Austin, TX
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list