[DeTomaso] 180 deg headers

[FAITH MCCALL]

Mike,

The headers that I offer are built to order and can be had in most any configuration that the customer requires.
The typical setup features stepped ( 1 3/4" to 1 7/8" ) primaries and a 3" merge collector. Most of the details can be tailored to exactly what is needed.

Thanks,
Ron

> On January 8, 2019 at 10:52 AM Mike Drew <MikeLDrew at aol.com mailto:MikeLDrew at aol.com > wrote:
> 
> 
>     Ron,
> 
>     Can you give more details? I have seen photos of your headers and they look beautiful.
> 
>     The existing 180 competitors on the market all suffer from being built by well-intentioned people who don’t understand the fundamental differences between them and standard headers. The Windsor version uses a 3-inch collector and the Cleveland uses 3.5-inch! 180 headers need a much smaller collector than standard headers for peak power and torque. Dan Jones mentioned that yesterday. I can’t remember what he recommended but I think it might be more like 2-inch.
> 
>     So, tell us more about yours?
> 
>     Mike
> 
>     Sent from my iPad
> 
>         > > On Jan 8, 2019, at 04:36, FAITH MCCALL <rfmccall at comcast.net mailto:rfmccall at comcast.net > wrote:
> > 
> >         I am having a run of 180 deg headers made if anyone is interested in
> >         a set, I should be able to discount the standard price ($2895)
> >         slightly depending on how many sets are ordered. These would be
> >         produced in the next week or so and would be of the highest quality
> >         available. They are only offered in stainless steel with merge
> >         collectors and V-band flanges for muffler attachment. They will be
> >         TIG welded with gorgeous welds . They are easy to install and
> >         look/sound incredible.
> > 
> >         They are available for the standard 9.2" deck height , 9.5" deck
> >         height ,8.2" deck height and your choice of Windsor , Cleveland or
> >         Yates head .
> > 
> >         Please contact me via email ( rfmccall at comcast.net mailto:rfmccall at comcast.net ) if you are
> >         interested or would like to see pics.
> > 
> >         Thanks,
> >         Ron
> >         _______________________________________________
> > 
> > 
> >         Detomaso Email List is not managed by POCA
> >         Posted emails must not exceed 1.5 Megabytes
> >         DeTomaso mailing list
> >         DeTomaso at server.detomasolist.com mailto:DeTomaso at server.detomasolist.com
> >         http://server.detomasolist.com/mailman/listinfo/detomaso
> > 
> >         To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> > 
> >         Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
> > 
> >     > 
-------------- next part --------------
   Mike,
   The headers that I offer are built to order and can be had in most any
   configuration that the customer requires.
   The typical setup features stepped ( 1 3/4" to 1 7/8" ) primaries and a
   3" merge collector. Most of the details can be tailored to exactly what
   is needed.
   Thanks,
   Ron

     On January 8, 2019 at 10:52 AM Mike Drew <[1]MikeLDrew at aol.com>
     wrote:
     Ron,
     Can you give more details? I have seen photos of your headers and
     they look beautiful.
     The existing 180 competitors on the market all suffer from being
     built by well-intentioned people who don't understand the
     fundamental differences between them and standard headers. The
     Windsor version uses a 3-inch collector and the Cleveland uses
     3.5-inch! 180 headers need a much smaller collector than standard
     headers for peak power and torque. Dan Jones mentioned that
     yesterday. I can't remember what he recommended but I think it might
     be more like 2-inch.
     So, tell us more about yours?
     Mike
     Sent from my iPad

     On Jan 8, 2019, at 04:36, FAITH MCCALL <[2]rfmccall at comcast.net>
     wrote:
     I am having a run of 180 deg headers made if anyone is interested in
     a set, I should be able to discount the standard price ($2895)
     slightly depending on how many sets are ordered. These would be
     produced in the next week or so and would be of the highest quality
     available. They are only offered in stainless steel with merge
     collectors and V-band flanges for muffler attachment. They will be
     TIG welded with gorgeous welds . They are easy to install and
     look/sound incredible.
     They are available for the standard 9.2" deck height , 9.5" deck
     height ,8.2" deck height and your choice of Windsor , Cleveland or
     Yates head .
     Please contact me via email ( [3]rfmccall at comcast.net) if you are
     interested or would like to see pics.
     Thanks,
     Ron
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [4]DeTomaso at server.detomasolist.com
     [5]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. mailto:MikeLDrew at aol.com
   2. mailto:rfmccall at comcast.net
   3. mailto:rfmccall at comcast.net
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso