[DeTomaso] Pantera Temperature Gauges
Dave McManus
Dave at damardirect.com
Mon Aug 26 12:40:42 EDT 2019
Don't forget temp. variances when lights are on.
IndyDave
-----Original Message-----
From: Garth Rodericks [mailto:garth_rodericks at yahoo.com]
Sent: Friday, August 23, 2019 12:39 PM
To: DeTomaso Mail List
Subject: [DeTomaso] Pantera Temperature Gauges
FWIW, when I moved my temp sender on my late pre-L from the coolant tank to the block (right above the water pump) I verified the accuracy of my temp gauge with an IR Temp Gun on the block at the temp sender and found the gauge was accurate to within 5 degrees, and that difference might have merely been the result of my interpretation of the gauge since it lacks gradient lines.
-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of steve at snclocks.com
Sent: viernes, 23 de agosto de 2019 20:10
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] Pantera Temperature Gauges
Over the years I have heard that the temperature gauges in Panteraas
were a bit off. And, Iave heard that adding a 10 ohm resister in series
with the temperature probe would make the gauge more accurate.
More information about the DeTomaso
mailing list