[DeTomaso] Pantera Temperature Gauges

[Garth Rodericks]

FWIW, when I moved my temp sender on my late pre-L from the coolant tank to the block (right above the water pump) I verified the accuracy of my temp gauge with an IR Temp Gun on the block at the temp sender and found the gauge was accurate to within 5 degrees, and that difference might have merely been the result of my interpretation of the gauge since it lacks gradient lines.

-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com> On Behalf Of steve at snclocks.com
Sent: viernes, 23 de agosto de 2019 20:10
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] Pantera Temperature Gauges

   Over the years I have heard that the temperature gauges in Panteraas
   were a bit off. And, Iave heard that adding a 10 ohm resister in series
   with the temperature probe would make the gauge more accurate. 
-------------- next part --------------
   FWIW, when I moved my temp sender on my late pre-L from the coolant
   tank to the block (right above the water pump) I verified the accuracy
   of my temp gauge with an IR Temp Gun on the block at the temp sender
   and found the gauge was accurate to within 5 degrees, and that
   difference might have merely been the result of my interpretation of
   the gauge since it lacks gradient lines.
-----Original Message-----
From: DeTomaso <[1]detomaso-bounces at server.detomasolist.com> On Behalf Of [2]
steve at snclocks.com
Sent: viernes, 23 de agosto de 2019 20:10
To: [3]detomaso at server.detomasolist.com
Subject: [DeTomaso] Pantera Temperature Gauges

   Over the years I have heard that the temperature gauges in Panteraas
   were a bit off. And, Iave heard that adding a 10 ohm resister in series
   with the temperature probe would make the gauge more accurate.

References

   1. http://server.detomasolist.com/mailman/listinfo/detomaso
   2. http://server.detomasolist.com/mailman/listinfo/detomaso
   3. http://server.detomasolist.com/mailman/listinfo/detomaso