[DeTomaso] Oil cooler question
Jeff Kimball
jgkrenton at comcast.net
Tue Sep 11 10:48:46 EDT 2018
All:
I know the oil cooler question has been discussed at great length and the serious racers such as Mad Dog seem to believe the big Fluidyne unit is the preferred solution, which I believe is this unit:
https://www.fluidyne.com/product-page/db-30500-water-to-oil-cooler
However, I don't recall nor have I been able to find any information on how the water side was plumbed in a Pantera. This Fluidyne unit has 3/4 inch pipe water connections where the smaller Ford Police interceptor units such as this:
https://www.ebay.com/itm/New-OEM-Oil-Cooler-For-94-96-Crown-Victoria-Grand-Marquis-Police-Package-ONLY/182538207253?fits=Model%3ACrown+Victoria%7CMake%3AFord&epid=1930515714&hash=item2a80200015:g:5MQAAOSwkShY-QrF https://www.ebay.com/itm/New-OEM-Oil-Cooler-For-94-96-Crown-Victoria-Grand-Marquis-Police-Package-ONLY/182538207253?fits=Model%3ACrown+Victoria%7CMake%3AFord&epid=1930515714&hash=item2a80200015:g:5MQAAOSwkShY-QrF
use a standard radiator hose size water connection and go directly in series with the main radiator lines.
How do people plumb in the Fluidyne unit? The 3/4 inch connections are way too small to be installed in series with the radiator. Are the heater water lines adequate?
Can anyone tell me how this was done or show me a photo or web link for this information?
Thanks all!
Jeff 2467
-------------- next part --------------
All:
I know the oil cooler question has been discussed at great length and
the serious racers such as Mad Dog seem to believe the big Fluidyne
unit is the preferred solution, which I believe is this unit:
[1]https://www.fluidyne.com/product-page/db-30500-water-to-oil-cooler
However, I don't recall nor have I been able to find any information on
how the water side was plumbed in a Pantera. This Fluidyne unit has
3/4 inch pipe water connections where the smaller Ford Police
interceptor units such as this:
[2]https://www.ebay.com/itm/New-OEM-Oil-Cooler-For-94-96-Crown-Victoria
-Grand-Marquis-Police-Package-ONLY/182538207253?fits=Model%3ACrown+Vict
oria%7CMake%3AFord&epid=1930515714&hash=item2a80200015:g:5MQAAOSwkShY-Q
rF
use a standard radiator hose size water connection and go directly in
series with the main radiator lines.
How do people plumb in the Fluidyne unit? The 3/4 inch connections are
way too small to be installed in series with the radiator. Are the
heater water lines adequate?
Can anyone tell me how this was done or show me a photo or web link for
this information?
Thanks all!
Jeff 2467
References
1. https://www.fluidyne.com/product-page/db-30500-water-to-oil-cooler
2. https://www.ebay.com/itm/New-OEM-Oil-Cooler-For-94-96-Crown-Victoria-Grand-Marquis-Police-Package-ONLY/182538207253?fits=Model%3ACrown+Victoria%7CMake%3AFord&epid=1930515714&hash=item2a80200015:g:5MQAAOSwkShY-QrF
More information about the DeTomaso
mailing list