[DeTomaso] converting to factory ZF side mounts
Jeff Detrich
jjdetrich at gmail.com
Sat May 26 13:34:49 EDT 2018
Try Kirk Evans.
Jeff
On Fri, May 25, 2018 at 12:17 PM, Larry Finch via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> All,
>
> My 2511 is an early, rear-mounted ZF car. I have been using an aftermarket
> side-mount system, but now wish to convert 2511 to the factory side-mount
> system.
>
> I have obtained the two factory ZF side-mount pieces and will need to
> install appropriate chassis sheet metal brackets. While Denny Finn can
> fabricate what is needed, I am wondering if by chance anyone has some or
> all of the factory pieces for this conversion?
>
> I realize the rear structure varies between the early and late cars in
> this area, but if factory pieces are available, that might be a better
> approach than just starting entirely from scratch.
>
> Since a picture is said to be worth a thousand words, I’m attaching two
> photos to help clarify the body sheetmetal I am seeking.
>
> If anyone has any pieces that might be of value in accomplishing this
> conversion, please let me know.
>
> Thanks,
>
> Larry
>
>
>
>
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
-------------- next part --------------
Try Kirk Evans.
Jeff
On Fri, May 25, 2018 at 12:17 PM, Larry Finch via DeTomaso
<[1]detomaso at server.detomasolist.com> wrote:
All,
My 2511 is an early, rear-mounted ZF car. I have been using an
aftermarket side-mount system, but now wish to convert 2511 to the
factory side-mount system.
I have obtained the two factory ZF side-mount pieces and will need
to install appropriate chassis sheet metal brackets. While Denny
Finn can fabricate what is needed, I am wondering if by chance
anyone has some or all of the factory pieces for this conversion?
I realize the rear structure varies between the early and late cars
in this area, but if factory pieces are available, that might be a
better approach than just starting entirely from scratch.
Since a picture is said to be worth a thousand words, Iam attaching
two photos to help clarify the body sheetmetal I am seeking.
If anyone has any pieces that might be of value in accomplishing
this conversion, please let me know.
Thanks,
Larry
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at server.detomasolist.com
[3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:detomaso at server.detomasolist.com
2. mailto:DeTomaso at server.detomasolist.com
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list