[DeTomaso] Clutch master cyl
Mike Drew
MikeLDrew at aol.com
Sun Jul 1 17:55:58 EDT 2018
Don,
Here you go:
https://panterapartsusa.myshopify.com/products/04027a
I think some vendors (Byars?) sell a locally made reproduction.
The piece is nit symmetrical and has a right and wrong orientation. Hopefully you paid attention when you took it out and will install the new one properly.
I have a diagram at home that shows the proper orientation.....
Mike
Sent from my iPad
> On Jul 1, 2018, at 23:42, Don Franck <panteradon at gmail.com> wrote:
>
> Turns out i have a lot of play in the triangular piece to the effort reduction kit. I will call Wilkinson Monday to see if I can get just that part.
>
> Don
>
>> On Sunday, July 1, 2018, Mike Drew <MikeLDrew at aol.com> wrote:
>> Don,
>>
>> All those pins should move freely. Since you already have things somewhat apart, you might as well remove both pins and clean off all the rust, and grease them up well.
>>
>> I have seen the T-shaped piece of the effort reduction kit with the holes worn oval because the owner failed to keep it greased properly.....
>>
>> Mike
>>
>> Sent from my iPad
>>
>> > On Jul 1, 2018, at 22:25, Don Franck <panteradon at gmail.com> wrote:
>> >
>> > We have hit a hurdle.A The washer in the old cylinder is 1/100 of an
>> > in larger that the new one and will not go into the new master
>> > cylinder.A We decided to pull the pin and remove the old arm from the
>> > car.A We got the snap ring off but the pin is rusted on solid.A
>> > Soaking it with blaster now.
>> >
>> > Any new ideas are appreciated!
>> >
>> > Don
>> > On Sunday, July 1, 2018, <[1]Admin at detomasoregistry.org> wrote:
>> >
>> > Don,
>> > You may find something useful here:
>> > [2]http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
>> > and
>> > [3]http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
>> > and
>> > [4]http://www.provamo.com/Members/TechInfo/
>> > ClutchEffortReductionKit.asp
>> > Found by searching the site map for "clutch"
>> > Chuck
>> > -----Original Message-----
>> > From: DeTomaso [mailto:[5]detomaso-bounces at server.detomasolist.com]
>> > On Behalf Of Don Franck
>> > Sent: Sunday, July 01, 2018 11:13 AM
>> > To: <[6]detomaso at server.detomasolist.com>; [7]SCPOCA at yahoogroups.com
>> > Subject: [DeTomaso] Clutch master cyl
>> > Ok here is a pic of the clutch mechanism under the dash.A A Getting
>> > to the
>> > top bolt seems to be an impossible task.A IF we can get it out, I
>> > can't see
>> > how we can get it back in!!!
>> > --
>> > Don
>> >
>> > --
>> > Don
>> >
>> > References
>> >
>> > 1. mailto:Admin at detomasoregistry.org
>> > 2. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
>> > 3. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
>> > 4. http://www.provamo.com/Members/TechInfo/ClutchEffortReductionKit.asp
>> > 5. mailto:detomaso-bounces at server.detomasolist.com
>> > 6. mailto:detomaso at server.detomasolist.com
>> > 7. mailto:SCPOCA at yahoogroups.com
>> > _______________________________________________
>> >
>> >
>> > Detomaso Email List is not managed by POCA
>> > Posted emails must not exceed 1.5 Megabytes
>> > DeTomaso mailing list
>> > DeTomaso at server.detomasolist.com
>> > http://server.detomasolist.com/mailman/listinfo/detomaso
>> >
>> > To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> >
>> > Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>>
>
>
> --
> Don
-------------- next part --------------
Don,
Here you go:
[1]https://panterapartsusa.myshopify.com/products/04027a
I think some vendors (Byars?) sell a locally made reproduction.
The piece is nit symmetrical and has a right and wrong orientation.
Hopefully you paid attention when you took it out and will install the
new one properly.
I have a diagram at home that shows the proper orientation.....
Mike
Sent from my iPad
On Jul 1, 2018, at 23:42, Don Franck <[2]panteradon at gmail.com> wrote:
Turns out i have a lot of play in the triangular piece to the effort
reduction kit. I will call Wilkinson Monday to see if I can get just
that part.
Don
On Sunday, July 1, 2018, Mike Drew <[3]MikeLDrew at aol.com> wrote:
Don,
All those pins should move freely. Since you already have things
somewhat apart, you might as well remove both pins and clean off all
the rust, and grease them up well.
I have seen the T-shaped piece of the effort reduction kit with the
holes worn oval because the owner failed to keep it greased
properly.....
Mike
Sent from my iPad
> On Jul 1, 2018, at 22:25, Don Franck <[4]panteradon at gmail.com>
wrote:
>
> We have hit a hurdle.A The washer in the old cylinder is 1/100
of an
> in larger that the new one and will not go into the new master
> cylinder.A We decided to pull the pin and remove the old arm
from the
> car.A We got the snap ring off but the pin is rusted on solid.A
> Soaking it with blaster now.
>
> Any new ideas are appreciated!
>
> Don
> On Sunday, July 1, 2018, <[1][5]Admin at detomasoregistry.org>
wrote:
>
> Don,
> You may find something useful here:
> [2][6]http://www.provamo.com/Members/TechInfo/
ClutchOverview.asp
> and
> [3][7]http://www.provamo.com/Members/DeTEvents/
2008ClutchMaster.asp
> and
> [4][8]http://www.provamo.com/Members/TechInfo/
> ClutchEffortReductionKit.asp
> Found by searching the site map for "clutch"
> Chuck
> -----Original Message-----
> From: DeTomaso
[mailto:[5][9]detomaso-bounces at server.detomasolist.com]
> On Behalf Of Don Franck
> Sent: Sunday, July 01, 2018 11:13 AM
> To: <[6][10]detomaso at server.detomasolist.com>;
[7][11]SCPOCA at yahoogroups.com
> Subject: [DeTomaso] Clutch master cyl
> Ok here is a pic of the clutch mechanism under the dash.A A
Getting
> to the
> top bolt seems to be an impossible task.A IF we can get it
out, I
> can't see
> how we can get it back in!!!
> --
> Don
>
> --
> Don
>
> References
>
> 1. mailto:[12]Admin at detomasoregistry.org
> 2. [13]http://www.provamo.com/Members/TechInfo/
ClutchOverview.asp
> 3. [14]http://www.provamo.com/Members/DeTEvents/
2008ClutchMaster.asp
> 4. [15]http://www.provamo.com/Members/TechInfo/
ClutchEffortReductionKit.asp
> 5. mailto:[16]detomaso-bounces at server.detomasolist.com
> 6. mailto:[17]detomaso at server.detomasolist.com
> 7. mailto:[18]SCPOCA at yahoogroups.com
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [19]DeTomaso at server.detomasolist.com
> [20]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
--
Don
References
1. https://panterapartsusa.myshopify.com/products/04027a
2. mailto:panteradon at gmail.com
3. mailto:MikeLDrew at aol.com
4. mailto:panteradon at gmail.com
5. mailto:Admin at detomasoregistry.org
6. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
7. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
8. http://www.provamo.com/Members/TechInfo/
9. mailto:detomaso-bounces at server.detomasolist.com
10. mailto:detomaso at server.detomasolist.com
11. mailto:SCPOCA at yahoogroups.com
12. mailto:Admin at detomasoregistry.org
13. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
14. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
15. http://www.provamo.com/Members/TechInfo/ClutchEffortReductionKit.asp
16. mailto:detomaso-bounces at server.detomasolist.com
17. mailto:detomaso at server.detomasolist.com
18. mailto:SCPOCA at yahoogroups.com
19. mailto:DeTomaso at server.detomasolist.com
20. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list