[DeTomaso] Clutch master cyl
Don Franck
panteradon at gmail.com
Sun Jul 1 17:42:00 EDT 2018
Turns out i have a lot of play in the triangular piece to the effort
reduction kit. I will call Wilkinson Monday to see if I can get just that
part.
Don
On Sunday, July 1, 2018, Mike Drew <MikeLDrew at aol.com> wrote:
> Don,
>
> All those pins should move freely. Since you already have things somewhat
> apart, you might as well remove both pins and clean off all the rust, and
> grease them up well.
>
> I have seen the T-shaped piece of the effort reduction kit with the holes
> worn oval because the owner failed to keep it greased properly.....
>
> Mike
>
> Sent from my iPad
>
> > On Jul 1, 2018, at 22:25, Don Franck <panteradon at gmail.com> wrote:
> >
> > We have hit a hurdle.A The washer in the old cylinder is 1/100 of an
> > in larger that the new one and will not go into the new master
> > cylinder.A We decided to pull the pin and remove the old arm from the
> > car.A We got the snap ring off but the pin is rusted on solid.A
> > Soaking it with blaster now.
> >
> > Any new ideas are appreciated!
> >
> > Don
> > On Sunday, July 1, 2018, <[1]Admin at detomasoregistry.org> wrote:
> >
> > Don,
> > You may find something useful here:
> > [2]http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
> > and
> > [3]http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
> > and
> > [4]http://www.provamo.com/Members/TechInfo/
> > ClutchEffortReductionKit.asp
> > Found by searching the site map for "clutch"
> > Chuck
> > -----Original Message-----
> > From: DeTomaso [mailto:[5]detomaso-bounces at server.detomasolist.com]
> > On Behalf Of Don Franck
> > Sent: Sunday, July 01, 2018 11:13 AM
> > To: <[6]detomaso at server.detomasolist.com>; [7]SCPOCA at yahoogroups.com
> > Subject: [DeTomaso] Clutch master cyl
> > Ok here is a pic of the clutch mechanism under the dash.A A Getting
> > to the
> > top bolt seems to be an impossible task.A IF we can get it out, I
> > can't see
> > how we can get it back in!!!
> > --
> > Don
> >
> > --
> > Don
> >
> > References
> >
> > 1. mailto:Admin at detomasoregistry.org
> > 2. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
> > 3. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
> > 4. http://www.provamo.com/Members/TechInfo/
> ClutchEffortReductionKit.asp
> > 5. mailto:detomaso-bounces at server.detomasolist.com
> > 6. mailto:detomaso at server.detomasolist.com
> > 7. mailto:SCPOCA at yahoogroups.com
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
--
Don
-------------- next part --------------
Turns out i have a lot of play in the triangular piece to the effort
reduction kit.A I will call Wilkinson Monday to see if I can get just
that part.
Don
On Sunday, July 1, 2018, Mike Drew <[1]MikeLDrew at aol.com> wrote:
Don,
All those pins should move freely. Since you already have things
somewhat apart, you might as well remove both pins and clean off all
the rust, and grease them up well.
I have seen the T-shaped piece of the effort reduction kit with the
holes worn oval because the owner failed to keep it greased
properly.....
Mike
Sent from my iPad
> On Jul 1, 2018, at 22:25, Don Franck <[2]panteradon at gmail.com>
wrote:
>
>A A We have hit a hurdle.AA The washer in the old cylinder is
1/100 of an
>A A in larger that the new one and will not go into the new master
>A A cylinder.AA We decided to pull the pin and remove the old arm
from the
>A A car.AA We got the snap ring off but the pin is rusted on
solid.A
>A A Soaking it with blaster now.
>
>A A Any new ideas are appreciated!
>
>A A Don
>A A On Sunday, July 1, 2018, <[1][3]Admin at detomasoregistry.org>
wrote:
>
>A A A Don,
>A A A You may find something useful here:
>A A A [2][4]http://www.provamo.com/Members/TechInfo/
ClutchOverview.asp
>A A A and
>A A A [3][5]http://www.provamo.com/Members/DeTEvents/
2008ClutchMaster.asp
>A A A and
>A A A [4][6]http://www.provamo.com/Members/TechInfo/
>A A A ClutchEffortReductionKit.asp
>A A A Found by searching the site map for "clutch"
>A A A Chuck
>A A A -----Original Message-----
>A A A From: DeTomaso
[mailto:[5][7]detomaso-bounces at server.detomasolist.com]
>A A A On Behalf Of Don Franck
>A A A Sent: Sunday, July 01, 2018 11:13 AM
>A A A To: <[6][8]detomaso at server.detomasolist.com>;
[7][9]SCPOCA at yahoogroups.com
>A A A Subject: [DeTomaso] Clutch master cyl
>A A A Ok here is a pic of the clutch mechanism under the dash.AA
A Getting
>A A A to the
>A A A top bolt seems to be an impossible task.AA IF we can get
it out, I
>A A A can't see
>A A A how we can get it back in!!!
>A A A --
>A A A Don
>
>A A --
>A A Don
>
> References
>
>A A 1. mailto:[10]Admin at detomasoregistry.org
>A A 2. [11]http://www.provamo.com/Members/TechInfo/
ClutchOverview.asp
>A A 3. [12]http://www.provamo.com/Members/DeTEvents/
2008ClutchMaster.asp
>A A 4. [13]http://www.provamo.com/Members/TechInfo/
ClutchEffortReductionKit.asp
>A A 5. mailto:[14]detomaso-bounces at server.detomasolist.com
>A A 6. mailto:[15]detomaso at server.detomasolist.com
>A A 7. mailto:[16]SCPOCA at yahoogroups.com
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [17]DeTomaso at server.detomasolist.com
> [18]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
--
Don
References
1. mailto:MikeLDrew at aol.com
2. mailto:panteradon at gmail.com
3. mailto:Admin at detomasoregistry.org
4. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
5. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
6. http://www.provamo.com/Members/TechInfo/
7. mailto:detomaso-bounces at server.detomasolist.com
8. mailto:detomaso at server.detomasolist.com
9. mailto:SCPOCA at yahoogroups.com
10. mailto:Admin at detomasoregistry.org
11. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
12. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
13. http://www.provamo.com/Members/TechInfo/ClutchEffortReductionKit.asp
14. mailto:detomaso-bounces at server.detomasolist.com
15. mailto:detomaso at server.detomasolist.com
16. mailto:SCPOCA at yahoogroups.com
17. mailto:DeTomaso at server.detomasolist.com
18. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list