[DeTomaso] Re Opening console for modern din 1 (2 by 7) radio???
Ken Green
kenn_green at yahoo.com
Mon Jan 29 15:29:40 EST 2018
Hi Tomas,
The flange on the mounting sleeve is only maybe 1/16 inch. The hole can't be even a little oversized. The face of the radio is only slightly larger. Not real user friendly. I tried to find a bezel made for a din 1 radio, but can't find one.
I could try to make a sheet metal bezel? If I mess it up, I can make another one. Sheet metal would provide a more positive indexing to the sleeve than the fiberglass. Maybe just a 1/4 inch around the opening, paint it black?
Ken
From: Tomas Gunnarsson <guson at home.se>
To: kenn_green at yahoo.com; detomaso at server.detomasolist.com
Sent: Monday, January 29, 2018 1:57 AM
Subject: [DeTomaso] Re Opening console for modern din 1 (2 by 7) radio???
Ken,
If you mark the corners of the new opening from the front, then cut the
cover according to those marks and fold it away while you cut from the
front you should be fine.
Tomas
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Hi Tomas,
The flange on the mounting sleeve is only maybe 1/16 inch. The
hole can't be even a little oversized. The face of the radio is only
slightly larger. Not real user friendly. I tried to find a bezel made
for a din 1 radio, but can't find one.
I could try to make a sheet metal bezel? If I mess it up, I can
make another one. Sheet metal would provide a more positive indexing
to the sleeve than the fiberglass. Maybe just a 1/4 inch around the
opening, paint it black?
Ken
__________________________________________________________________
From: Tomas Gunnarsson <guson at home.se>
To: kenn_green at yahoo.com; detomaso at server.detomasolist.com
Sent: Monday, January 29, 2018 1:57 AM
Subject: [DeTomaso] Re Opening console for modern din 1 (2 by 7)
radio???
Ken,
If you mark the corners of the new opening from the front, then cut
the
cover according to those marks and fold it away while you cut from
the
front you should be fine.
Tomas
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list