[DeTomaso] Header Gaskets for 351c 4v Iron Heads ?

[B Hower]

That is what I have had installed on the Pantera............ but they are too hard to conform to my poorly fitting headers....... Looks like time to work on correcting their non true condition..... A stock factory Cleveland in an 70 Torino uses no gasket between manifold and head ........... years of running and 144,000 miles with no leaks.
 Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )

      From: Matt <nwpantera at gmail.com>
 To: b.hower3400 at yahoo.com; detomaso at server.detomasolist.com 
 Sent: Monday, October 2, 2017 7:58 PM
 Subject: Header Gaskets for 351c 4v Iron Heads ?
   
I installed copper exhaust manifold header gaskets about 15 years ago on the recommendation of a drag race buddy. Others might chime in but I've not had a problem since.They might even have something better now days, but it was a good quick fix back then. Sorry no part #'s but here's a link.
https://www.summitracing.com/parts/fog-7015c/overview/
Matt3584

From: "B Hower via DeTomaso" <[2]detomaso at server. detomasolist.com>
   To: "DeTomaso List" <[3]detomaso at server. detomasolist.com>
   Sent: Sunday, October 1, 2017 1:58:11 PM
   Subject: [DeTomaso] Header Gaskets for 351c 4v Iron Heads ?
   Help needed: What is the best gasket to seal poor fitting headers to
   351C 4V Iron Heads ?
   Thanks for any help with numbers,
   Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
   ! )


   
-------------- next part --------------
   That is what I have had installed on the Pantera............ but they
   are too hard to conform to my poorly fitting headers....... Looks like
   time to work on correcting their non true condition..... A stock
   factory Cleveland in an 70 Torino uses no gasket between manifold and
   head ........... years of running and 144,000 miles with no leaks.

   Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
   ! )
     __________________________________________________________________

   From: Matt <nwpantera at gmail.com>
   To: b.hower3400 at yahoo.com; detomaso at server.detomasolist.com
   Sent: Monday, October 2, 2017 7:58 PM
   Subject: Header Gaskets for 351c 4v Iron Heads ?
   I installed copper exhaust manifold header gaskets about 15 years ago
   on the recommendation of a drag race buddy.
   Others might chime in but I've not had a problem since.
   They might even have something better now days, but it was a good quick
   fix back then. Sorry no part #'s but here's a link.
   [1]https://www.summitracing.com/parts/fog-7015c/overview/
   Matt
   3584
   From: "B Hower via DeTomaso" <[2][2]detomaso at server. detomasolist.com>
      To: "DeTomaso List" <[3][3]detomaso at server. detomasolist.com>
      Sent: Sunday, October 1, 2017 1:58:11 PM
      Subject: [DeTomaso] Header Gaskets for 351c 4v Iron Heads ?
      Help needed: What is the best gasket to seal poor fitting headers to
      351C 4V Iron Heads ?
      Thanks for any help with numbers,
      Bud #3400 ( Drive it like there is no tomorrow -- for there may not
   be
      ! )

References

   1. https://www.summitracing.com/parts/fog-7015c/overview/
   2. mailto:detomaso at server.detomasolist.com
   3. mailto:detomaso at server.detomasolist.com