[DeTomaso] DeTomaso Digest, Vol 153, Issue 28
Eugenio Innocenti
e.innocenti at gmx.de
Sun Mar 26 17:37:52 EDT 2017
Here is a quick knowledge test.
What are the part numbers for original carb and intake manifold for a
72 Pantera. Not GTS.
First to answer gets a cold german beer the next time he's anywhere
near where I live here in Germany.
--
Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail
gesendet.
Am 26.03.17, 18:00, detomaso-request at server.detomasolist.com schrieb:
Send DeTomaso mailing list submissions to
detomaso at server.detomasolist.com
To subscribe or unsubscribe via the World Wide Web, visit
[1]http://server.detomasolist.com/mailman/listinfo/detomaso
or, via email, send a message with subject or body 'help' to
detomaso-request at server.detomasolist.com
You can reach the person managing the list at
detomaso-owner at server.detomasolist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of DeTomaso digest..."
Daily Detomaso List Digest
Today's Topics:
1. Re: Ford GT Pantera engine (dgordon100 at cox.net)
2. looking for a Longchamp rear badge (Patrick HALS)
3. Re: Ford GT Pantera engine (jderyke at aol.com)
4. Re: Ford GT Pantera engine (Jeff Detrich)
5. !0 X15 Campi Wheels (William Schauer)
6. Re: !0 X15 Campi Wheels (Paul Rimov)
7. Re: Ford GT Pantera engine (Paul Rimov)
8. Re: looking for a Longchamp rear badge (Paul Rimov)
9. Re: Ford GT Pantera engine (dgordon100 at cox.net)
10. Re: !0 X15 Campi Wheels (Charles McCall)
11. Re: !0 X15 Campi Wheels (Gray Gregory)
12. Re: !0 X15 Campi Wheels (William Schauer)
13. Re: !0 X15 Campi Wheels (Mike Drew)
14. Re: !0 X15 Campi Wheels (Julian Kift)
15. Re: !0 X15 Campi Wheels (Julian Kift)
--------------------------------------------------------------------
--
Message: 1
Date: Sat, 25 Mar 2017 15:31:31 -0400
From: <dgordon100 at cox.net>
To: detomaso at server.detomasolist.com, Mike & Elizabeth Thomas
<mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Ford GT Pantera engine
Message-ID: <20170325153131.HWR2X.73936.imail at fed1rmwml205>
Content-Type: text/plain; charset=utf-8
Steve is doing two of them. Both with Ford crate motors purchased
new. Someone could buy a used engine and transmission from
X2Builders last I heard. Few years back they were getting around
$25K for both. Don't know if that included all the accessories, and
wiring.
---- Mike & Elizabeth Thomas <mbefthomas at comcast.net> wrote:
> Considering all the dolts who have mashed up their Ford GT's there
ought to
> be a good supply of these motors out there. Is this the first
transplant
> Steve has done?
> Mike
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com]
On Behalf
> Of dgordon100 at cox.net
> Sent: Thursday, March 23, 2017 6:25 PM
> To: detomaso at server.detomasolist.com
> Subject: [DeTomaso] Ford GT Pantera engine
>
> The decklid is modified so that it gradually humps up in the
middle on the
> Red car. Thus the opening is a little smaller to see out of from
the cabin.
> Wilkinson had a lot of time in making the decklid, which is
fiberglass,
> Even though the Ford GT engine was lowered ~3 inches in the car,
the stock
> supercharger still was too high for the stock deckllid.
>
> David
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5
> Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
> [2]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive
or approve
> the archiving of list messages.
>
------------------------------
Message: 2
Date: Sat, 25 Mar 2017 21:10:56 +0100
From: Patrick HALS <patrickhals at gmail.com>
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] looking for a Longchamp rear badge
Message-ID:
<CAJvZtGtgYauHRr_ghpSBFRqD2tLNb6TBoS-X3abg-AgO_4n8WA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I bought this beautiful and extremely rare GTS Longchamp cabrio RHD
LCTV03211 in Melbourne in Australia.
I just noticed that the car has no rear badge ( DT , and Longchamp )
Does anyone know where I can get the " Longchamp" badge ?
Thank you
Pat
-------------- next part --------------
I bought this beautiful and extremely rare GTS Longchamp cabrio RHD
LCTV03211 in Melbourne in Australia.
I just noticed that the car has no rear badge ( DT , and Longchamp
)A
Does anyone know where I can get the " Longchamp" badge ?A
Thank youA
Pat
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 10.jpg
Type: image/jpeg
Size: 67730 bytes
Desc: not available
URL:
<[3]http://server.detomasolist.com/pipermail/detomaso/attachments/20
170325/c846b2d3/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 3.jpg
Type: image/jpeg
Size: 75809 bytes
Desc: not available
URL:
<[4]http://server.detomasolist.com/pipermail/detomaso/attachments/20
170325/c846b2d3/attachment-0003.jpg>
------------------------------
Message: 3
Date: Sat, 25 Mar 2017 17:34:07 -0400
From: jderyke at aol.com
To: dgordon100 at cox.net, detomaso at server.detomasolist.com,
mbefthomas at comcast.net
Subject: Re: [DeTomaso] Ford GT Pantera engine
Message-ID: <15b07640787-21a6-21f63 at webprd-a11.mail.aol.com>
Content-Type: text/plain; charset="utf-8"
If those things still use the gigantic Ricardo 6-speed transaxle,
good luck using THAT thing! Someone mentioned that Steve rigged one
in a Pantera with a Ford GT engine some years ago and it was too
wide, too long and too heavy to easily fit. He said 'never again!'
-----Original Message-----
From: dgordon100 <dgordon100 at cox.net>
To: detomaso <detomaso at server.detomasolist.com>; Mike & Elizabeth
Thomas <mbefthomas at comcast.net>
Sent: Sat, Mar 25, 2017 12:31 pm
Subject: Re: [DeTomaso] Ford GT Pantera engine
Steve is doing two of them. Both with Ford crate motors purchased
new. Someone could buy a used engine and transmission from
X2Builders last I heard. Few years back they were getting around
$25K for both. Don't know if that included all the accessories, and
wiring.
---- Mike & Elizabeth Thomas <mbefthomas at comcast.net> wrote:
> Considering all the dolts who have mashed up their Ford GT's there
ought to
> be a good supply of these motors out there. Is this the first
transplant
> Steve has done?
> Mike
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com]
On Behalf
> Of dgordon100 at cox.net
> Sent: Thursday, March 23, 2017 6:25 PM
> To: detomaso at server.detomasolist.com
> Subject: [DeTomaso] Ford GT Pantera engine
>
> The decklid is modified so that it gradually humps up in the
middle on the
> Red car. Thus the opening is a little smaller to see out of from
the cabin.
> Wilkinson had a lot of time in making the decklid, which is
fiberglass,
> Even though the Ford GT engine was lowered ~3 inches in the car,
the stock
> supercharger still was too high for the stock deckllid.
>
> David
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5
> Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
> [5]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive
or approve
> the archiving of list messages.
>
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[6]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
-------------- next part --------------
If those things still use the gigantic Ricardo 6-speed transaxle,
good
luck using THAT thing! Someone mentioned that Steve rigged one in a
Pantera with a Ford GT engine some years ago and it was too wide,
too
long and too heavy to easily fit. He said 'never again!'
-----Original Message-----
From: dgordon100 <dgordon100 at cox.net>
To: detomaso <detomaso at server.detomasolist.com>; Mike & Elizabeth
Thomas <mbefthomas at comcast.net>
Sent: Sat, Mar 25, 2017 12:31 pm
Subject: Re: [DeTomaso] Ford GT Pantera engine
Steve is doing two of them. Both with Ford crate motors purchased
new.
Someone could buy a used engine and transmission from X2Builders
last I
heard. Few years back they were getting around $25K for both. Don't
know if that included all the accessories, and wiring.
---- Mike & Elizabeth Thomas <[1]mbefthomas at comcast.net> wrote:
> Considering all the dolts who have mashed up their Ford GT's there
ought to
> be a good supply of these motors out there. Is this the first
transplant
> Steve has done?
> Mike
>
> -----Original Message-----
> From: DeTomaso
[[2]mailto:detomaso-bounces at server.detomasolist.com]
On Behalf
> Of [3]dgordon100 at cox.net
> Sent: Thursday, March 23, 2017 6:25 PM
> To: [4]detomaso at server.detomasolist.com
> Subject: [DeTomaso] Ford GT Pantera engine
>
> The decklid is modified so that it gradually humps up in the
middle
on the
> Red car. Thus the opening is a little smaller to see out of from
the
cabin.
> Wilkinson had a lot of time in making the decklid, which is
fiberglass,
> Even though the Ford GT engine was lowered ~3 inches in the car,
the
stock
> supercharger still was too high for the stock deckllid.
>
> David
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5
> Megabytes DeTomaso mailing list
[5]DeTomaso at server.detomasolist.com
> [6][7]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.)
use
> the links above.
>
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive
or
approve
> the archiving of list messages.
>
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[7]DeTomaso at server.detomasolist.com
[8][8]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
References
1. mailto:mbefthomas at comcast.net
2. mailto:detomaso-bounces at server.detomasolist.com?
3. mailto:dgordon100 at cox.net
4. mailto:detomaso at server.detomasolist.com
5. mailto:DeTomaso at server.detomasolist.com
6. [9]http://server.detomasolist.com/mailman/listinfo/detomaso
7. mailto:DeTomaso at server.detomasolist.com
8. [10]http://server.detomasolist.com/mailman/listinfo/detomaso
------------------------------
Message: 4
Date: Sat, 25 Mar 2017 16:49:44 -0500
From: Jeff Detrich <jjdetrich at gmail.com>
To: jderyke at aol.com
Cc: detomaso at server.detomasolist.com, mbefthomas at comcast.net,
dgordon100 at cox.net
Subject: Re: [DeTomaso] Ford GT Pantera engine
Message-ID:
<CANX29aVoOSvj9nfG_7g=FmeZZq=MA5r2z7piFTFy5xLKDs87Hw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I believe there was one being done down here in Dallas as well. The
trans
stuck out so far they had to totally re-engineer the rear of the
car. The
guy was in love with paddle shifters!
Jeff
6559
On Sat, Mar 25, 2017 at 4:34 PM, Jack DeRyke via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> If those things still use the gigantic Ricardo 6-speed transaxle,
good
> luck using THAT thing! Someone mentioned that Steve rigged one in
a
> Pantera with a Ford GT engine some years ago and it was too wide,
too
> long and too heavy to easily fit. He said 'never again!'
> -----Original Message-----
> From: dgordon100 <dgordon100 at cox.net>
> To: detomaso <detomaso at server.detomasolist.com>; Mike & Elizabeth
> Thomas <mbefthomas at comcast.net>
> Sent: Sat, Mar 25, 2017 12:31 pm
> Subject: Re: [DeTomaso] Ford GT Pantera engine
> Steve is doing two of them. Both with Ford crate motors purchased
new.
> Someone could buy a used engine and transmission from X2Builders
last I
> heard. Few years back they were getting around $25K for both.
Don't
> know if that included all the accessories, and wiring.
> ---- Mike & Elizabeth Thomas <[1]mbefthomas at comcast.net> wrote:
> > Considering all the dolts who have mashed up their Ford GT's
there
> ought to
> > be a good supply of these motors out there. Is this the first
> transplant
> > Steve has done?
> > Mike
> >
> > -----Original Message-----
> > From: DeTomaso
[[2]mailto:detomaso-bounces at server.detomasolist.com]
> On Behalf
> > Of [3]dgordon100 at cox.net
> > Sent: Thursday, March 23, 2017 6:25 PM
> > To: [4]detomaso at server.detomasolist.com
> > Subject: [DeTomaso] Ford GT Pantera engine
> >
> > The decklid is modified so that it gradually humps up in the
middle
> on the
> > Red car. Thus the opening is a little smaller to see out of from
the
> cabin.
> > Wilkinson had a lot of time in making the decklid, which is
> fiberglass,
> > Even though the Ford GT engine was lowered ~3 inches in the car,
the
> stock
> > supercharger still was too high for the stock deckllid.
> >
> > David
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA Posted emails must
not
> exceed 1.5
> > Megabytes DeTomaso mailing list
[5]DeTomaso at server.detomasolist.com
> > [6][11]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe,
etc.)
> use
> > the links above.
> >
> > Members who post to this list grant license to the list to
forward
> any
> > message posted here to all past, current, or future members of
the
> list.
> > They also grant the list owner permission to maintain an archive
or
> approve
> > the archiving of list messages.
> >
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [7]DeTomaso at server.detomasolist.com
> [8][12]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. mailto:mbefthomas at comcast.net
> 2. mailto:detomaso-bounces at server.detomasolist.com?
> 3. mailto:dgordon100 at cox.net
> 4. mailto:detomaso at server.detomasolist.com
> 5. mailto:DeTomaso at server.detomasolist.com
> 6. [13]http://server.detomasolist.com/mailman/listinfo/detomaso
> 7. mailto:DeTomaso at server.detomasolist.com
> 8. [14]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [15]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
list.
> They also grant the list owner permission to maintain an archive
or approve
> the archiving of list messages.
>
-------------- next part --------------
I believe there was one being done down here in Dallas as well. The
trans stuck out so far they had to totally re-engineer the rear of
the
car. The guy was in love with paddle shifters!
Jeff
6559
On Sat, Mar 25, 2017 at 4:34 PM, Jack DeRyke via DeTomaso
<[1]detomaso at server.detomasolist.com> wrote:
A A If those things still use the gigantic Ricardo 6-speed
transaxle, good
A A luck using THAT thing! Someone mentioned that Steve rigged one
in a
A A Pantera with a Ford GT engine some years ago and it was too
wide, too
A A long and too heavy to easily fit. He said 'never again!'
A A -----Original Message-----
A A From: dgordon100 <[2]dgordon100 at cox.net>
A A To: detomaso <[3]detomaso at server.detomasolist.com>; Mike &
Elizabeth
A A Thomas <[4]mbefthomas at comcast.net>
A A Sent: Sat, Mar 25, 2017 12:31 pm
A A Subject: Re: [DeTomaso] Ford GT Pantera engine
A A Steve is doing two of them. Both with Ford crate motors
purchased new.
A A Someone could buy a used engine and transmission from
X2Builders last I
A A heard. Few years back they were getting around $25K for both.
Don't
A A know if that included all the accessories, and wiring.
A A ---- Mike & Elizabeth Thomas <[1][5]mbefthomas at comcast.net>
wrote:
A A > Considering all the dolts who have mashed up their Ford GT's
there
A A ought to
A A > be a good supply of these motors out there. Is this the first
A A transplant
A A > Steve has done?
A A > Mike
A A >
A A > -----Original Message-----
A A > From: DeTomaso [[2]mailto:[6]detomaso-bounces@
server.detomasolist.com]
A A On Behalf
A A > Of [3][7]dgordon100 at cox.net
A A > Sent: Thursday, March 23, 2017 6:25 PM
A A > To: [4][8]detomaso at server.detomasolist.com
A A > Subject: [DeTomaso] Ford GT Pantera engine
A A >
A A > The decklid is modified so that it gradually humps up in the
middle
A A on the
A A > Red car. Thus the opening is a little smaller to see out of
from the
A A cabin.
A A > Wilkinson had a lot of time in making the decklid, which is
A A fiberglass,
A A > Even though the Ford GT engine was lowered ~3 inches in the
car, the
A A stock
A A > supercharger still was too high for the stock deckllid.
A A >
A A > David
A A > _______________________________________________
A A >
A A >
A A > Detomaso Email List is not managed by POCA Posted emails must
not
A A exceed 1.5
A A > Megabytes DeTomaso mailing list [5][9]DeTomaso at server.
detomasolist.com
A A > [6][10][16]http://server.detomasolist.
com/mailman/listinfo/detomaso
A A >
A A > To manage your subscription (change email address,
unsubscribe, etc.)
A A use
A A > the links above.
A A >
A A > Members who post to this list grant license to the list to
forward
A A any
A A > message posted here to all past, current, or future members
of the
A A list.
A A > They also grant the list owner permission to maintain an
archive or
A A approve
A A > the archiving of list messages.
A A >
A A _______________________________________________
A A Detomaso Email List is not managed by POCA
A A Posted emails must not exceed 1.5 Megabytes
A A DeTomaso mailing list
A A [7][11]DeTomaso at server.detomasolist.com
A A
[8][12][17]http://server.detomasolist.com/mailman/listinfo/detomaso
A A To manage your subscription (change email address, unsubscribe,
etc.)
A A use the links above.
A A Members who post to this list grant license to the list to
forward any
A A message posted here to all past, current, or future members of
the
A A list. They also grant the list owner permission to maintain an
archive
A A or approve the archiving of list messages.
References
A A 1. mailto:[13]mbefthomas at comcast.net
A A 2. mailto:[14]detomaso-bounces at server.detomasolist.com?
A A 3. mailto:[15]dgordon100 at cox.net
A A 4. mailto:[16]detomaso at server.detomasolist.com
A A 5. mailto:[17]DeTomaso at server.detomasolist.com
A A 6.
[18][18]http://server.detomasolist.com/mailman/listinfo/detomaso
A A 7. mailto:[19]DeTomaso at server.detomasolist.com
A A 8.
[20][19]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[21]DeTomaso at server.detomasolist.com
[22][20]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:detomaso at server.detomasolist.com
2. mailto:dgordon100 at cox.net
3. mailto:detomaso at server.detomasolist.com
4. mailto:mbefthomas at comcast.net
5. mailto:mbefthomas at comcast.net
6. mailto:detomaso-bounces at server.detomasolist.com
7. mailto:dgordon100 at cox.net
8. mailto:detomaso at server.detomasolist.com
9. mailto:DeTomaso at server.detomasolist.com
10. [21]http://server.detomasolist.com/mailman/listinfo/detomaso
11. mailto:DeTomaso at server.detomasolist.com
12. [22]http://server.detomasolist.com/mailman/listinfo/detomaso
13. mailto:mbefthomas at comcast.net
14. mailto:detomaso-bounces at server.detomasolist.com
15. mailto:dgordon100 at cox.net
16. mailto:detomaso at server.detomasolist.com
17. mailto:DeTomaso at server.detomasolist.com
18. [23]http://server.detomasolist.com/mailman/listinfo/detomaso
19. mailto:DeTomaso at server.detomasolist.com
20. [24]http://server.detomasolist.com/mailman/listinfo/detomaso
21. mailto:DeTomaso at server.detomasolist.com
22. [25]http://server.detomasolist.com/mailman/listinfo/detomaso
------------------------------
Message: 5
Date: Sat, 25 Mar 2017 18:05:28 -0500
From: "William Schauer" <wrschauer at sbcglobal.net>
To: <detomaso at server.detomasolist.com>
Subject: [DeTomaso] !0 X15 Campi Wheels
Message-ID: <000c01d2a5bc$4c7d4b00$e577e100$@sbcglobal.net>
Content-Type: text/plain; charset="us-ascii"
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X !5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the
10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy
makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels
before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
-------------- next part --------------
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X
!5" front and 10" X 15 rear wheels instead of the 7x15/8x15 - but
need
the 10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
[1]wrschauer at sbcglobal.net
630-513-6700
References
1. mailto:wrschauer at sbcglobal.net
------------------------------
Message: 6
Date: Sat, 25 Mar 2017 18:48:00 -0700
From: Paul Rimov <rimovp at icloud.com>
To: William Schauer <wrschauer at sbcglobal.net>
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID: <C8BDABA3-192D-47C6-9F23-A557461E1F58 at icloud.com>
Content-Type: text/plain; charset=us-ascii
William this is exactly the place for your inquiry. Genuine vintage
10 inch Campagnolo wheels have become very prized and when they do
pop up for sale are quite costly. In my opinion the two 15 inch
options in addition to the 17 and 18 replica options are a great
alternative and do have the advantage of being of newer materials
with more modern manufacturing processes. Best of luck with your
quest. Cheers Paul
Sent from my iPhone
> On Mar 25, 2017, at 4:05 PM, William Schauer
<wrschauer at sbcglobal.net> wrote:
>
> Hi All.
>
>
> New to the list, so apologies if this is an improper use of the
list.
>
>
> Just bought a 1973 Pantera that is pretty much totally stock.
>
>
> Want to keep the look but prefer the slight change in look of the
8" X
> !5" front and 10" X 15 rear wheels instead of the 7x15/8x15 - but
need
> the 10x15's
>
>
> Understand Marvic in Italy makes as new magnesium and Roin also in
> Italy makes aluminum copies.
>
>
> Want to exhaust my search for used original 10" X 15" Campanolo
GTS
> wheels before I go to aftermarket.
>
>
> Please let me know if you have 1 or 2 or know of any.
>
>
> Thanks.
>
>
> William Schauer
>
> [1]wrschauer at sbcglobal.net
>
> 630-513-6700
>
> References
>
> 1. mailto:wrschauer at sbcglobal.net
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [26]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
------------------------------
Message: 7
Date: Sat, 25 Mar 2017 19:02:00 -0700
From: Paul Rimov <rimovp at icloud.com>
To: Jeff Detrich <jjdetrich at gmail.com>
Cc: detomaso at server.detomasolist.com, mbefthomas at comcast.net,
dgordon100 at cox.net
Subject: Re: [DeTomaso] Ford GT Pantera engine
Message-ID: <58A0910D-F2D8-47CE-B9CF-FCF59A731F2A at icloud.com>
Content-Type: text/plain; charset=us-ascii
So every one can start hating on me now and pointing their finger at
me and call me hypocrite but I don't get the swap. I goofed around
with an all aluminum 302 for awhile and drove a guy's Cobra sourced
5.4 over in Bend a couple of times and the original Cleveland is
just soo much fun and looks totally cool and correct in the car in
the first place.
Sent from my iPhone
> On Mar 25, 2017, at 2:49 PM, Jeff Detrich <jjdetrich at gmail.com>
wrote:
>
> I believe there was one being done down here in Dallas as well.
The
> trans stuck out so far they had to totally re-engineer the rear of
the
> car. The guy was in love with paddle shifters!
> Jeff
> 6559
>
> On Sat, Mar 25, 2017 at 4:34 PM, Jack DeRyke via DeTomaso
> <[1]detomaso at server.detomasolist.com> wrote:
>
> A A If those things still use the gigantic Ricardo 6-speed
> transaxle, good
> A A luck using THAT thing! Someone mentioned that Steve rigged one
> in a
> A A Pantera with a Ford GT engine some years ago and it was too
> wide, too
> A A long and too heavy to easily fit. He said 'never again!'
> A A -----Original Message-----
> A A From: dgordon100 <[2]dgordon100 at cox.net>
> A A To: detomaso <[3]detomaso at server.detomasolist.com>; Mike &
> Elizabeth
> A A Thomas <[4]mbefthomas at comcast.net>
> A A Sent: Sat, Mar 25, 2017 12:31 pm
> A A Subject: Re: [DeTomaso] Ford GT Pantera engine
> A A Steve is doing two of them. Both with Ford crate motors
> purchased new.
> A A Someone could buy a used engine and transmission from
> X2Builders last I
> A A heard. Few years back they were getting around $25K for both.
> Don't
> A A know if that included all the accessories, and wiring.
> A A ---- Mike & Elizabeth Thomas <[1][5]mbefthomas at comcast.net>
> wrote:
> A A > Considering all the dolts who have mashed up their Ford GT's
> there
> A A ought to
> A A > be a good supply of these motors out there. Is this the
first
> A A transplant
> A A > Steve has done?
> A A > Mike
> A A >
> A A > -----Original Message-----
> A A > From: DeTomaso [[2]mailto:[6]detomaso-bounces@
> server.detomasolist.com]
> A A On Behalf
> A A > Of [3][7]dgordon100 at cox.net
> A A > Sent: Thursday, March 23, 2017 6:25 PM
> A A > To: [4][8]detomaso at server.detomasolist.com
> A A > Subject: [DeTomaso] Ford GT Pantera engine
> A A >
> A A > The decklid is modified so that it gradually humps up in the
> middle
> A A on the
> A A > Red car. Thus the opening is a little smaller to see out of
> from the
> A A cabin.
> A A > Wilkinson had a lot of time in making the decklid, which is
> A A fiberglass,
> A A > Even though the Ford GT engine was lowered ~3 inches in the
> car, the
> A A stock
> A A > supercharger still was too high for the stock deckllid.
> A A >
> A A > David
> A A > _______________________________________________
> A A >
> A A >
> A A > Detomaso Email List is not managed by POCA Posted emails
must
> not
> A A exceed 1.5
> A A > Megabytes DeTomaso mailing list [5][9]DeTomaso at server.
> detomasolist.com
> A A > [6][10][27]http://server.detomasolist.
> com/mailman/listinfo/detomaso
> A A >
> A A > To manage your subscription (change email address,
> unsubscribe, etc.)
> A A use
> A A > the links above.
> A A >
> A A > Members who post to this list grant license to the list to
> forward
> A A any
> A A > message posted here to all past, current, or future members
> of the
> A A list.
> A A > They also grant the list owner permission to maintain an
> archive or
> A A approve
> A A > the archiving of list messages.
> A A >
> A A _______________________________________________
> A A Detomaso Email List is not managed by POCA
> A A Posted emails must not exceed 1.5 Megabytes
> A A DeTomaso mailing list
> A A [7][11]DeTomaso at server.detomasolist.com
> A A
[8][12][28]http://server.detomasolist.com/mailman/listinfo/detomaso
> A A To manage your subscription (change email address,
unsubscribe,
> etc.)
> A A use the links above.
> A A Members who post to this list grant license to the list to
> forward any
> A A message posted here to all past, current, or future members of
> the
> A A list. They also grant the list owner permission to maintain an
> archive
> A A or approve the archiving of list messages.
> References
> A A 1. mailto:[13]mbefthomas at comcast.net
> A A 2. mailto:[14]detomaso-bounces at server.detomasolist.com?
> A A 3. mailto:[15]dgordon100 at cox.net
> A A 4. mailto:[16]detomaso at server.detomasolist.com
> A A 5. mailto:[17]DeTomaso at server.detomasolist.com
> A A 6.
[18][29]http://server.detomasolist.com/mailman/listinfo/detomaso
> A A 7. mailto:[19]DeTomaso at server.detomasolist.com
> A A 8.
[20][30]http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [21]DeTomaso at server.detomasolist.com
> [22][31]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of
> the list. They also grant the list owner permission to maintain an
> archive or approve the archiving of list messages.
>
> References
>
> 1. mailto:detomaso at server.detomasolist.com
> 2. mailto:dgordon100 at cox.net
> 3. mailto:detomaso at server.detomasolist.com
> 4. mailto:mbefthomas at comcast.net
> 5. mailto:mbefthomas at comcast.net
> 6. mailto:detomaso-bounces at server.detomasolist.com
> 7. mailto:dgordon100 at cox.net
> 8. mailto:detomaso at server.detomasolist.com
> 9. mailto:DeTomaso at server.detomasolist.com
> 10. [32]http://server.detomasolist.com/mailman/listinfo/detomaso
> 11. mailto:DeTomaso at server.detomasolist.com
> 12. [33]http://server.detomasolist.com/mailman/listinfo/detomaso
> 13. mailto:mbefthomas at comcast.net
> 14. mailto:detomaso-bounces at server.detomasolist.com
> 15. mailto:dgordon100 at cox.net
> 16. mailto:detomaso at server.detomasolist.com
> 17. mailto:DeTomaso at server.detomasolist.com
> 18. [34]http://server.detomasolist.com/mailman/listinfo/detomaso
> 19. mailto:DeTomaso at server.detomasolist.com
> 20. [35]http://server.detomasolist.com/mailman/listinfo/detomaso
> 21. mailto:DeTomaso at server.detomasolist.com
> 22. [36]http://server.detomasolist.com/mailman/listinfo/detomaso
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [37]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
------------------------------
Message: 8
Date: Sat, 25 Mar 2017 19:08:13 -0700
From: Paul Rimov <rimovp at icloud.com>
To: Patrick HALS <patrickhals at gmail.com>
Cc: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] looking for a Longchamp rear badge
Message-ID: <5FD77520-BCE0-49F1-963F-090BDBDDF9BA at icloud.com>
Content-Type: text/plain; charset=us-ascii
I can not help you with your quest for a rear badge other that to
reach out to our vendors. Hopefully you will share more pictures.
The car looks just beautiful
Sent from my iPhone
> On Mar 25, 2017, at 1:10 PM, Patrick HALS <patrickhals at gmail.com>
wrote:
>
> I bought this beautiful and extremely rare GTS Longchamp cabrio
RHD
> LCTV03211 in Melbourne in Australia.
> I just noticed that the car has no rear badge ( DT , and Longchamp
)A
> Does anyone know where I can get the " Longchamp" badge ?A
> Thank youA
> Pat
> <10.jpg>
> <3.jpg>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [38]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
------------------------------
Message: 9
Date: Sat, 25 Mar 2017 23:58:31 -0400
From: <dgordon100 at cox.net>
To: Jeff Detrich <jjdetrich at gmail.com>, Paul Rimov
<rimovp at icloud.com>
Cc: detomaso at server.detomasolist.com, mbefthomas at comcast.net
Subject: Re: [DeTomaso] Ford GT Pantera engine
Message-ID: <20170325235831.VQXF5.27973.imail at fed1rmwml213>
Content-Type: text/plain; charset=utf-8
I chose it for the wide power band, the ability to be modified to
over 1000 HP without changing the internals, reliability,
specifically engineered for a 200+ mph mid-engine car, and the
rarity. Having said that, if I had to make the choice today I would
go with a Roush injected small block Ford engine . Priorities change
over time. :)
---- Paul Rimov <rimovp at icloud.com> wrote:
> So every one can start hating on me now and pointing their finger
at me and call me hypocrite but I don't get the swap. I goofed
around with an all aluminum 302 for awhile and drove a guy's Cobra
sourced 5.4 over in Bend a couple of times and the original
Cleveland is just soo much fun and looks totally cool and correct in
the car in the first place.
>
> Sent from my iPhone
>
> > On Mar 25, 2017, at 2:49 PM, Jeff Detrich <jjdetrich at gmail.com>
wrote:
> >
> > I believe there was one being done down here in Dallas as well.
The
> > trans stuck out so far they had to totally re-engineer the rear
of the
> > car. The guy was in love with paddle shifters!
> > Jeff
> > 6559
> >
> > On Sat, Mar 25, 2017 at 4:34 PM, Jack DeRyke via DeTomaso
> > <[1]detomaso at server.detomasolist.com> wrote:
> >
> > A A If those things still use the gigantic Ricardo 6-speed
> > transaxle, good
> > A A luck using THAT thing! Someone mentioned that Steve rigged
one
> > in a
> > A A Pantera with a Ford GT engine some years ago and it was too
> > wide, too
> > A A long and too heavy to easily fit. He said 'never again!'
> > A A -----Original Message-----
> > A A From: dgordon100 <[2]dgordon100 at cox.net>
> > A A To: detomaso <[3]detomaso at server.detomasolist.com>; Mike &
> > Elizabeth
> > A A Thomas <[4]mbefthomas at comcast.net>
> > A A Sent: Sat, Mar 25, 2017 12:31 pm
> > A A Subject: Re: [DeTomaso] Ford GT Pantera engine
> > A A Steve is doing two of them. Both with Ford crate motors
> > purchased new.
> > A A Someone could buy a used engine and transmission from
> > X2Builders last I
> > A A heard. Few years back they were getting around $25K for
both.
> > Don't
> > A A know if that included all the accessories, and wiring.
> > A A ---- Mike & Elizabeth Thomas <[1][5]mbefthomas at comcast.net>
> > wrote:
> > A A > Considering all the dolts who have mashed up their Ford
GT's
> > there
> > A A ought to
> > A A > be a good supply of these motors out there. Is this the
first
> > A A transplant
> > A A > Steve has done?
> > A A > Mike
> > A A >
> > A A > -----Original Message-----
> > A A > From: DeTomaso [[2]mailto:[6]detomaso-bounces@
> > server.detomasolist.com]
> > A A On Behalf
> > A A > Of [3][7]dgordon100 at cox.net
> > A A > Sent: Thursday, March 23, 2017 6:25 PM
> > A A > To: [4][8]detomaso at server.detomasolist.com
> > A A > Subject: [DeTomaso] Ford GT Pantera engine
> > A A >
> > A A > The decklid is modified so that it gradually humps up in
the
> > middle
> > A A on the
> > A A > Red car. Thus the opening is a little smaller to see out
of
> > from the
> > A A cabin.
> > A A > Wilkinson had a lot of time in making the decklid, which
is
> > A A fiberglass,
> > A A > Even though the Ford GT engine was lowered ~3 inches in
the
> > car, the
> > A A stock
> > A A > supercharger still was too high for the stock deckllid.
> > A A >
> > A A > David
> > A A > _______________________________________________
> > A A >
> > A A >
> > A A > Detomaso Email List is not managed by POCA Posted emails
must
> > not
> > A A exceed 1.5
> > A A > Megabytes DeTomaso mailing list [5][9]DeTomaso at server.
> > detomasolist.com
> > A A > [6][10][39]http://server.detomasolist.
> > com/mailman/listinfo/detomaso
> > A A >
> > A A > To manage your subscription (change email address,
> > unsubscribe, etc.)
> > A A use
> > A A > the links above.
> > A A >
> > A A > Members who post to this list grant license to the list to
> > forward
> > A A any
> > A A > message posted here to all past, current, or future
members
> > of the
> > A A list.
> > A A > They also grant the list owner permission to maintain an
> > archive or
> > A A approve
> > A A > the archiving of list messages.
> > A A >
> > A A _______________________________________________
> > A A Detomaso Email List is not managed by POCA
> > A A Posted emails must not exceed 1.5 Megabytes
> > A A DeTomaso mailing list
> > A A [7][11]DeTomaso at server.detomasolist.com
> > A A
[8][12][40]http://server.detomasolist.com/mailman/listinfo/detomaso
> > A A To manage your subscription (change email address,
unsubscribe,
> > etc.)
> > A A use the links above.
> > A A Members who post to this list grant license to the list to
> > forward any
> > A A message posted here to all past, current, or future members
of
> > the
> > A A list. They also grant the list owner permission to maintain
an
> > archive
> > A A or approve the archiving of list messages.
> > References
> > A A 1. mailto:[13]mbefthomas at comcast.net
> > A A 2. mailto:[14]detomaso-bounces at server.detomasolist.com?
> > A A 3. mailto:[15]dgordon100 at cox.net
> > A A 4. mailto:[16]detomaso at server.detomasolist.com
> > A A 5. mailto:[17]DeTomaso at server.detomasolist.com
> > A A 6.
[18][41]http://server.detomasolist.com/mailman/listinfo/detomaso
> > A A 7. mailto:[19]DeTomaso at server.detomasolist.com
> > A A 8.
[20][42]http://server.detomasolist.com/mailman/listinfo/detomaso
> > _______________________________________________
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > [21]DeTomaso at server.detomasolist.com
> > [22][43]http://server.detomasolist.com/mailman/listinfo/detomaso
> > To manage your subscription (change email address, unsubscribe,
> > etc.) use the links above.
> > Members who post to this list grant license to the list to
forward
> > any message posted here to all past, current, or future members
of
> > the list. They also grant the list owner permission to maintain
an
> > archive or approve the archiving of list messages.
> >
> > References
> >
> > 1. mailto:detomaso at server.detomasolist.com
> > 2. mailto:dgordon100 at cox.net
> > 3. mailto:detomaso at server.detomasolist.com
> > 4. mailto:mbefthomas at comcast.net
> > 5. mailto:mbefthomas at comcast.net
> > 6. mailto:detomaso-bounces at server.detomasolist.com
> > 7. mailto:dgordon100 at cox.net
> > 8. mailto:detomaso at server.detomasolist.com
> > 9. mailto:DeTomaso at server.detomasolist.com
> > 10. [44]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 11. mailto:DeTomaso at server.detomasolist.com
> > 12. [45]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 13. mailto:mbefthomas at comcast.net
> > 14. mailto:detomaso-bounces at server.detomasolist.com
> > 15. mailto:dgordon100 at cox.net
> > 16. mailto:detomaso at server.detomasolist.com
> > 17. mailto:DeTomaso at server.detomasolist.com
> > 18. [46]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 19. mailto:DeTomaso at server.detomasolist.com
> > 20. [47]http://server.detomasolist.com/mailman/listinfo/detomaso
> > 21. mailto:DeTomaso at server.detomasolist.com
> > 22. [48]http://server.detomasolist.com/mailman/listinfo/detomaso
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > [49]http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
> >
> > Members who post to this list grant license to the list to
forward any message posted here to all past, current, or future
members of the list. They also grant the list owner permission to
maintain an archive or approve the archiving of list messages.
------------------------------
Message: 10
Date: Sun, 26 Mar 2017 11:03:39 +0200
From: Charles McCall <charlesmccall at gmail.com>
To: "'William Schauer'" <wrschauer at sbcglobal.net>,
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID: <05ec01d2a60f$dccb58c0$96620a40$@gmail.com>
Content-Type: text/plain; charset="us-ascii"
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears
look great. If it were my car, I'd go with Marvic reproductions -
identical
to the originals, the same lightweight material (magnesium) as the
originals, and new. Don't see the downside to this solution, and it
may even
be cheaper than buying 30 year old originals
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X !5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the
10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy
makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels
before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
------------------------------
Message: 11
Date: Sun, 26 Mar 2017 14:01:23 +0000
From: Gray Gregory <rgg at gregorycook.com>
To: Charles McCall <charlesmccall at gmail.com>, 'William Schauer'
<wrschauer at sbcglobal.net>, "detomaso at server.detomasolist.com"
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID:
<MWHPR05MB2896B968706FBF48B549445BBC300 at MWHPR05MB2896.namprd05.prod.
outlook.com>
Content-Type: text/plain; charset="us-ascii"
Does Marvic make 8" reproductions as well? It would be nice to have
a matched set of new wheels if going the route. If no which style 8"
campi's were used on cars originally equipped with the 8" 10" combo?
Gray
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf Of Charles McCall
Sent: Sunday, March 26, 2017 4:04 AM
To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears look great. If it were my car, I'd go with Marvic
reproductions - identical to the originals, the same lightweight
material (magnesium) as the originals, and new. Don't see the
downside to this solution, and it may even be cheaper than buying 30
year old originals
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X !5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the 10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
DeTomaso at server.detomasolist.com
[50]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
------------------------------
Message: 12
Date: Sun, 26 Mar 2017 10:02:23 -0500
From: "William Schauer" <wrschauer at sbcglobal.net>
To: "'Gray Gregory'" <rgg at gregorycook.com>, "'Charles McCall'"
<charlesmccall at gmail.com>, <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID: <002b01d2a641$f9e587a0$edb096e0$@sbcglobal.net>
Content-Type: text/plain; charset="us-ascii"
Hi Gray.
Yes, Marvic makes 15x8s.
Attached is response from Marvic. Silvia speaks English and is very
helpful.
Marvic wheels seem to be top quality and are magnesium = lighter
than the
aluminum alternatives. All of which comes at a cost. As you can see
in the
attached , the set of 4 wheels cost 5800 euros, before VAT and
shipping etc.
Another respondent had talked through all the adds and said the all
in cost
> $7000.
Silvia said delivery would be about six weeks. She suggested I talk
to
Yoyodyne, Marvic' s NJ distributor (of cycle equipment). I did. They
said
they could save me money ordering through them (wheels price the
same) but
would combine shipping with his supplies. I mentioned the 6 week
delivery
and he laughed. He said those are "Italian weeks" and not
necessarily
consecutive weeks at that.
William Schauer
wrschauer at sbcglobal.net
630-513-6700
-----Original Message-----
From: Gray Gregory [mailto:rgg at gregorycook.com]
Sent: Sunday, March 26, 2017 9:01 AM
To: Charles McCall <charlesmccall at gmail.com>; 'William Schauer'
<wrschauer at sbcglobal.net>; detomaso at server.detomasolist.com
Subject: RE: [DeTomaso] !0 X15 Campi Wheels
Does Marvic make 8" reproductions as well? It would be nice to have
a
matched set of new wheels if going the route. If no which style 8"
campi's
were used on cars originally equipped with the 8" 10" combo?
Gray
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of Charles McCall
Sent: Sunday, March 26, 2017 4:04 AM
To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears
look great. If it were my car, I'd go with Marvic reproductions -
identical
to the originals, the same lightweight material (magnesium) as the
originals, and new. Don't see the downside to this solution, and it
may even
be cheaper than buying 30 year old originals
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X !5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the
10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy
makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels
before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5
Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
[51]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use
the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list.
They also grant the list owner permission to maintain an archive or
approve
the archiving of list messages.
-------------- next part --------------
An embedded message was scrubbed...
From: "William Schauer" <wrschauer at sbcglobal.net>
Subject: RE: 10" X 15" Pantera GTS wheels.
Date: Wed, 22 Mar 2017 08:30:08 -0500
Size: 19691
URL:
<[52]http://server.detomasolist.com/pipermail/detomaso/attachments/2
0170326/7aa81595/attachment-0001.mht>
------------------------------
Message: 13
Date: Sun, 26 Mar 2017 08:05:01 -0700
From: Mike Drew <MikeLDrew at aol.com>
To: Gray Gregory <rgg at gregorycook.com>
Cc: "detomaso at server.detomasolist.com"
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID: <881990A7-6BEC-4704-A3F8-659D08F9542E at aol.com>
Content-Type: text/plain; charset=us-ascii
Marvic does advertise new 8-inch wheels. But I would never pay $1800
each for one when originals can be had all day long for $100-200.
The Marvic 10-inch wheels are a great thing, but they don't match
the originals perfectly.
Mike
Sent from my iPhone
On Mar 26, 2017, at 7:01, Gray Gregory <rgg at gregorycook.com> wrote:
> Does Marvic make 8" reproductions as well? It would be nice to
have a matched set of new wheels if going the route. If no which
style 8" campi's were used on cars originally equipped with the 8"
10" combo?
>
> Gray
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com]
On Behalf Of Charles McCall
> Sent: Sunday, March 26, 2017 4:04 AM
> To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] !0 X15 Campi Wheels
>
> William - since you are looking for opinions here's one more...
>
> I agree that the original Campy look is really special, and the
10" rears look great. If it were my car, I'd go with Marvic
reproductions - identical to the originals, the same lightweight
material (magnesium) as the originals, and new. Don't see the
downside to this solution, and it may even be cheaper than buying 30
year old originals
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com]
On Behalf Of William Schauer
> Sent: domingo, 26 de marzo de 2017 0:05
> To: detomaso at server.detomasolist.com
> Subject: [DeTomaso] !0 X15 Campi Wheels
>
> Hi All.
>
>
>
> New to the list, so apologies if this is an improper use of the
list.
>
>
>
> Just bought a 1973 Pantera that is pretty much totally stock.
>
>
>
> Want to keep the look but prefer the slight change in look of the
8" X !5"
> front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the 10x15's
>
>
>
> Understand Marvic in Italy makes as new magnesium and Roin also in
Italy makes aluminum copies.
>
>
>
> Want to exhaust my search for used original 10" X 15" Campanolo
GTS wheels before I go to aftermarket.
>
>
>
> Please let me know if you have 1 or 2 or know of any.
>
>
>
> Thanks.
>
>
>
> William Schauer
>
> <mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
>
> 630-513-6700
>
>
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
DeTomaso at server.detomasolist.com
[53]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [54]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
------------------------------
Message: 14
Date: Sun, 26 Mar 2017 15:15:01 +0000
From: Julian Kift <julian_kift at hotmail.com>
To: Gray Gregory <rgg at gregorycook.com>, Charles McCall
<charlesmccall at gmail.com>, 'William Schauer'
<wrschauer at sbcglobal.net>, "detomaso at server.detomasolist.com"
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID:
<MWHPR18MB14531D2DFB4167F31CD6633C95300 at MWHPR18MB1453.namprd18.prod.
outlook.com>
Content-Type: text/plain; charset="windows-1252"
Yes, per their website Marvic make the 8x15's magnesium as well as
two designs of 10's, 'long' and 'short' rib, for those that would
want a 'matched' set of new wheels.
[55]http://marvic.it/en/prodotto/pantera-gts/
There was some recent similar discussion n the PI forum;;
Pricing per unit, without VAT, ex-works for 10" x 15" (either
version) is ? 1,550 delivery ~ 6 weeks with 40% down at order,
balance on shipment. Marvic would supply the wheels through a dealer
located in New Jersey. That price is better than the $4K+ that used
pairs of 10" wheels have been selling for recently, without the
risks associated with 40 year old magnesium wheels.
Contact;
Silvia Framba
MARVIC WHEELS SRL
via Gallarate, 4 - 21020 BRUNELLO (VA) - Italy
tel +390332463386 - fax +390332464160
[56]www.marvic.it
Mr Fiat carries the Roin aluminum wheels at inflated prices ($1,405
for a 10"), latest quote (a week ago) direct from Roin was ?850 for
the 10" and ?750 for the 8".
Roin also offer a visually correct 17" dia. in 11" and 9" widths to
suit more modern rubber availability, whereas many of the
reproducyion campi's are not visually close to original.
[57]http://mrfiat.com/italian/de-tomaso/pantera.html
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
of Gray Gregory <rgg at gregorycook.com>
Sent: Sunday, March 26, 2017 7:01 AM
To: Charles McCall; 'William Schauer';
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Does Marvic make 8" reproductions as well? It would be nice to have
a matched set of new wheels if going the route. If no which style 8"
campi's were used on cars originally equipped with the 8" 10" combo?
Gray
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf Of Charles McCall
Sent: Sunday, March 26, 2017 4:04 AM
To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears look great. If it were my car, I'd go with Marvic
reproductions - identical to the originals, the same lightweight
material (magnesium) as the originals, and new. Don't see the
downside to this solution, and it may even be cheaper than buying 30
year old originals
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X !5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the 10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
DeTomaso at server.detomasolist.com
[58]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[59]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
-------------- next part --------------
Yes, per their website Marvic make the 8x15's magnesium as well as
two
designs of 10's, 'long' and 'short' rib, for those that would want a
'matched' set of new wheels.
[1][60]http://marvic.it/en/prodotto/pantera-gts/
There was some recent similar discussion n the PI forum;;
Pricing per unit, without VAT, ex-works for 10" x 15" (either
version)
is EUR 1,550 delivery ~ 6 weeks with 40% down at order, balance on
shipment. Marvic would supply the wheels through a dealer located in
New Jersey. That price is better than the $4K+ that used pairs of
10"
wheels have been selling for recently, without the risks associated
with 40 year old magnesium wheels.
Contact;
Silvia Framba
MARVIC WHEELS SRL
via Gallarate, 4 - 21020 BRUNELLO (VA) - Italy
tel +390332463386 - fax +390332464160
[61]www.marvic.it
Mr Fiat carries the Roin aluminum wheels at inflated prices ($1,405
for
a 10"), latest quote (a week ago) direct from Roin was EUR850 for
the
10" and EUR750 for the 8".
Roin also offer a visually correct 17" dia. in 11" and 9" widths to
suit more modern rubber availability, whereas many of the
reproducyion
campi's are not visually close to original.
[62]http://mrfiat.com/italian/de-tomaso/pantera.html
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
of
Gray Gregory <rgg at gregorycook.com>
Sent: Sunday, March 26, 2017 7:01 AM
To: Charles McCall; 'William Schauer';
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Does Marvic make 8" reproductions as well? It would be nice to have
a
matched set of new wheels if going the route. If no which style 8"
campi's were used on cars originally equipped with the 8" 10" combo?
Gray
-----Original Message-----
From: DeTomaso [[2]mailto:detomaso-bounces at server.detomasolist.com]
On
Behalf Of Charles McCall
Sent: Sunday, March 26, 2017 4:04 AM
To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears look great. If it were my car, I'd go with Marvic
reproductions -
identical to the originals, the same lightweight material
(magnesium)
as the originals, and new. Don't see the downside to this solution,
and
it may even be cheaper than buying 30 year old originals
-----Original Message-----
From: DeTomaso [[3]mailto:detomaso-bounces at server.detomasolist.com]
On
Behalf Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X
!5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the
10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<[4]mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
DeTomaso at server.detomasolist.com
[5][63]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[6][64]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
References
1. [65]http://marvic.it/en/prodotto/pantera-gts/
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:detomaso-bounces at server.detomasolist.com
4. mailto:wrschauer at sbcglobal.net
5. [66]http://server.detomasolist.com/mailman/listinfo/detomaso
6. [67]http://server.detomasolist.com/mailman/listinfo/detomaso
------------------------------
Message: 15
Date: Sun, 26 Mar 2017 15:27:59 +0000
From: Julian Kift <julian_kift at hotmail.com>
To: William Schauer <wrschauer at sbcglobal.net>, 'Gray Gregory'
<rgg at gregorycook.com>, 'Charles McCall' <charlesmccall at gmail.com>,
"detomaso at server.detomasolist.com"
<detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Message-ID:
<MWHPR18MB1453D021D587A77C577B436395300 at MWHPR18MB1453.namprd18.prod.
outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
Apologies if my response was somewhat repetitive, I just found
William's email in my junk folder.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
of William Schauer <wrschauer at sbcglobal.net>
Sent: Sunday, March 26, 2017 8:02 AM
To: 'Gray Gregory'; 'Charles McCall';
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Hi Gray.
Yes, Marvic makes 15x8s.
Attached is response from Marvic. Silvia speaks English and is very
helpful.
Marvic wheels seem to be top quality and are magnesium = lighter
than the
aluminum alternatives. All of which comes at a cost. As you can see
in the
attached , the set of 4 wheels cost 5800 euros, before VAT and
shipping etc.
Another respondent had talked through all the adds and said the all
in cost
> $7000.
Silvia said delivery would be about six weeks. She suggested I talk
to
Yoyodyne, Marvic' s NJ distributor (of cycle equipment). I did. They
said
they could save me money ordering through them (wheels price the
same) but
would combine shipping with his supplies. I mentioned the 6 week
delivery
and he laughed. He said those are "Italian weeks" and not
necessarily
consecutive weeks at that.
William Schauer
wrschauer at sbcglobal.net
630-513-6700
-----Original Message-----
From: Gray Gregory [mailto:rgg at gregorycook.com]
Sent: Sunday, March 26, 2017 9:01 AM
To: Charles McCall <charlesmccall at gmail.com>; 'William Schauer'
<wrschauer at sbcglobal.net>; detomaso at server.detomasolist.com
Subject: RE: [DeTomaso] !0 X15 Campi Wheels
Does Marvic make 8" reproductions as well? It would be nice to have
a
matched set of new wheels if going the route. If no which style 8"
campi's
were used on cars originally equipped with the 8" 10" combo?
Gray
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of Charles McCall
Sent: Sunday, March 26, 2017 4:04 AM
To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears
look great. If it were my car, I'd go with Marvic reproductions -
identical
to the originals, the same lightweight material (magnesium) as the
originals, and new. Don't see the downside to this solution, and it
may even
be cheaper than buying 30 year old originals
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X !5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the
10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy
makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels
before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5
Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
[68]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use
the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list.
They also grant the list owner permission to maintain an archive or
approve
the archiving of list messages.
-------------- next part --------------
Apologies if my response was somewhat repetitive, I just found
William's email in my junk folder.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf
of
William Schauer <wrschauer at sbcglobal.net>
Sent: Sunday, March 26, 2017 8:02 AM
To: 'Gray Gregory'; 'Charles McCall';
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
Hi Gray.
Yes, Marvic makes 15x8s.
Attached is response from Marvic. Silvia speaks English and is very
helpful.
Marvic wheels seem to be top quality and are magnesium = lighter
than
the
aluminum alternatives. All of which comes at a cost. As you can see
in
the
attached , the set of 4 wheels cost 5800 euros, before VAT and
shipping
etc.
Another respondent had talked through all the adds and said the all
in
cost
> $7000.
Silvia said delivery would be about six weeks. She suggested I talk
to
Yoyodyne, Marvic' s NJ distributor (of cycle equipment). I did. They
said
they could save me money ordering through them (wheels price the
same)
but
would combine shipping with his supplies. I mentioned the 6 week
delivery
and he laughed. He said those are "Italian weeks" and not
necessarily
consecutive weeks at that.
William Schauer
wrschauer at sbcglobal.net
630-513-6700
-----Original Message-----
From: Gray Gregory [[1]mailto:rgg at gregorycook.com]
Sent: Sunday, March 26, 2017 9:01 AM
To: Charles McCall <charlesmccall at gmail.com>; 'William Schauer'
<wrschauer at sbcglobal.net>; detomaso at server.detomasolist.com
Subject: RE: [DeTomaso] !0 X15 Campi Wheels
Does Marvic make 8" reproductions as well? It would be nice to have
a
matched set of new wheels if going the route. If no which style 8"
campi's
were used on cars originally equipped with the 8" 10" combo?
Gray
-----Original Message-----
From: DeTomaso [[2]mailto:detomaso-bounces at server.detomasolist.com]
On
Behalf
Of Charles McCall
Sent: Sunday, March 26, 2017 4:04 AM
To: 'William Schauer' <wrschauer at sbcglobal.net>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] !0 X15 Campi Wheels
William - since you are looking for opinions here's one more...
I agree that the original Campy look is really special, and the 10"
rears
look great. If it were my car, I'd go with Marvic reproductions -
identical
to the originals, the same lightweight material (magnesium) as the
originals, and new. Don't see the downside to this solution, and it
may
even
be cheaper than buying 30 year old originals
-----Original Message-----
From: DeTomaso [[3]mailto:detomaso-bounces at server.detomasolist.com]
On
Behalf
Of William Schauer
Sent: domingo, 26 de marzo de 2017 0:05
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] !0 X15 Campi Wheels
Hi All.
New to the list, so apologies if this is an improper use of the
list.
Just bought a 1973 Pantera that is pretty much totally stock.
Want to keep the look but prefer the slight change in look of the 8"
X
!5"
front and 10" X 15 rear wheels instead of the 7x15/8x15 - but need
the
10x15's
Understand Marvic in Italy makes as new magnesium and Roin also in
Italy
makes aluminum copies.
Want to exhaust my search for used original 10" X 15" Campanolo GTS
wheels
before I go to aftermarket.
Please let me know if you have 1 or 2 or know of any.
Thanks.
William Schauer
<[4]mailto:wrschauer at sbcglobal.net> wrschauer at sbcglobal.net
630-513-6700
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5
Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
[5][69]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.)
use
the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list.
They also grant the list owner permission to maintain an archive or
approve
the archiving of list messages.
References
1. mailto:rgg at gregorycook.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:detomaso-bounces at server.detomasolist.com
4. mailto:wrschauer at sbcglobal.net
5. [70]http://server.detomasolist.com/mailman/listinfo/detomaso
------------------------------
Subject: Digest Footer
_______________________________________________
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[71]http://server.detomasolist.com/mailman/listinfo/detomaso
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
------------------------------
End of DeTomaso Digest, Vol 153, Issue 28
*****************************************
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
2. http://server.detomasolist.com/mailman/listinfo/detomaso
3. http://server.detomasolist.com/pipermail/detomaso/attachments/20170325/c846b2d3/attachment-0002.jpg
4. http://server.detomasolist.com/pipermail/detomaso/attachments/20170325/c846b2d3/attachment-0003.jpg
5. http://server.detomasolist.com/mailman/listinfo/detomaso
6. http://server.detomasolist.com/mailman/listinfo/detomaso
7. http://server.detomasolist.com/mailman/listinfo/detomaso
8. http://server.detomasolist.com/mailman/listinfo/detomaso
9. http://server.detomasolist.com/mailman/listinfo/detomaso
10. http://server.detomasolist.com/mailman/listinfo/detomaso
11. http://server.detomasolist.com/mailman/listinfo/detomaso
12. http://server.detomasolist.com/mailman/listinfo/detomaso
13. http://server.detomasolist.com/mailman/listinfo/detomaso
14. http://server.detomasolist.com/mailman/listinfo/detomaso
15. http://server.detomasolist.com/mailman/listinfo/detomaso
16. http://server.detomasolist/
17. http://server.detomasolist.com/mailman/listinfo/detomaso
18. http://server.detomasolist.com/mailman/listinfo/detomaso
19. http://server.detomasolist.com/mailman/listinfo/detomaso
20. http://server.detomasolist.com/mailman/listinfo/detomaso
21. http://server.detomasolist.com/mailman/listinfo/detomaso
22. http://server.detomasolist.com/mailman/listinfo/detomaso
23. http://server.detomasolist.com/mailman/listinfo/detomaso
24. http://server.detomasolist.com/mailman/listinfo/detomaso
25. http://server.detomasolist.com/mailman/listinfo/detomaso
26. http://server.detomasolist.com/mailman/listinfo/detomaso
27. http://server.detomasolist/
28. http://server.detomasolist.com/mailman/listinfo/detomaso
29. http://server.detomasolist.com/mailman/listinfo/detomaso
30. http://server.detomasolist.com/mailman/listinfo/detomaso
31. http://server.detomasolist.com/mailman/listinfo/detomaso
32. http://server.detomasolist.com/mailman/listinfo/detomaso
33. http://server.detomasolist.com/mailman/listinfo/detomaso
34. http://server.detomasolist.com/mailman/listinfo/detomaso
35. http://server.detomasolist.com/mailman/listinfo/detomaso
36. http://server.detomasolist.com/mailman/listinfo/detomaso
37. http://server.detomasolist.com/mailman/listinfo/detomaso
38. http://server.detomasolist.com/mailman/listinfo/detomaso
39. http://server.detomasolist/
40. http://server.detomasolist.com/mailman/listinfo/detomaso
41. http://server.detomasolist.com/mailman/listinfo/detomaso
42. http://server.detomasolist.com/mailman/listinfo/detomaso
43. http://server.detomasolist.com/mailman/listinfo/detomaso
44. http://server.detomasolist.com/mailman/listinfo/detomaso
45. http://server.detomasolist.com/mailman/listinfo/detomaso
46. http://server.detomasolist.com/mailman/listinfo/detomaso
47. http://server.detomasolist.com/mailman/listinfo/detomaso
48. http://server.detomasolist.com/mailman/listinfo/detomaso
49. http://server.detomasolist.com/mailman/listinfo/detomaso
50. http://server.detomasolist.com/mailman/listinfo/detomaso
51. http://server.detomasolist.com/mailman/listinfo/detomaso
52. http://server.detomasolist.com/pipermail/detomaso/attachments/20170326/7aa81595/attachment-0001.mht
53. http://server.detomasolist.com/mailman/listinfo/detomaso
54. http://server.detomasolist.com/mailman/listinfo/detomaso
55. http://marvic.it/en/prodotto/pantera-gts/
56. http://www.marvic.it/
57. http://mrfiat.com/italian/de-tomaso/pantera.html
58. http://server.detomasolist.com/mailman/listinfo/detomaso
59. http://server.detomasolist.com/mailman/listinfo/detomaso
60. http://marvic.it/en/prodotto/pantera-gts/
61. http://www.marvic.it/
62. http://mrfiat.com/italian/de-tomaso/pantera.html
63. http://server.detomasolist.com/mailman/listinfo/detomaso
64. http://server.detomasolist.com/mailman/listinfo/detomaso
65. http://marvic.it/en/prodotto/pantera-gts/
66. http://server.detomasolist.com/mailman/listinfo/detomaso
67. http://server.detomasolist.com/mailman/listinfo/detomaso
68. http://server.detomasolist.com/mailman/listinfo/detomaso
69. http://server.detomasolist.com/mailman/listinfo/detomaso
70. http://server.detomasolist.com/mailman/listinfo/detomaso
71. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list