[DeTomaso] DeTomaso Digest, Vol 147, Issue 33
Ken Green
kenn_green at yahoo.com
Tue Sep 27 15:40:26 EDT 2016
This kind of material is also available at McMaster Carr.
Ken
From: Mike Reilly <reillyms at live.com>
To: Kenny Hall <Kenny.Hall at Servatron.com>; "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>
Sent: Tuesday, September 27, 2016 12:33 PM
Subject: Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 33
Kenny, no problem. I had planned to provide more info so thanks for
the reminder. Info below. I can't remember the width I used but I took
an old roller (the rubber stock version) and used that as a guide to
make the cuts. It didn't have to be super accurate to fit in the
rails. This company is also a good resource for other stuff as well.
Mike Drew had pointed folks to it for something else and I really like
using them. Thanks, Mike R.
Company: Aircraft Spruce & Specialty Co.
Item info: 02-52001 DELRIN ROD 1" (NATURAL)
Price: $5.50 for 12" plus shipping
Link:
(http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickkey=3
080063)
OK, cough it up! What size Delrin (Diameter) and where did you find it
online? I need to fix mine in the worst way!
Kenny
From: Mike Reilly <reillyms at live.com>
To: Mike Drew via DeTomaso <detomaso at server.detomasolist.com>,
"fred at creekspeak.com" <fred at creekspeak.com>
Subject: Re: [DeTomaso] Seat Slide Rattles
Message-ID: <BAY405-EAS180D18A2FAED123987A18CFBACD0 at phx.gbl>
Content-Type: text/plain; charset="utf-8"
I just updated mine to Delrin after researching on the PI Forum for
possible solutions. I saw the vendors sold at set of eight new Delrin
rollers for about $80 but a simple internet search netted a one foot
rod that was the correct diameter for about $8. I bought it and then
cut it to the correct width with a hacksaw to make eight of them. I
just put the seats in a few weeks ago and they slide great and I don?t
hear any noise from them at all. It?s an easy way to go IMHO. Mike
R.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[1]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
This kind of material is also available at McMaster Carr.
Ken
__________________________________________________________________
From: Mike Reilly <reillyms at live.com>
To: Kenny Hall <Kenny.Hall at Servatron.com>;
"detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>
Sent: Tuesday, September 27, 2016 12:33 PM
Subject: Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 33
Kenny, no problem. I had planned to provide more info so thanks for
the reminder. Info below. I can't remember the width I used but I
took
an old roller (the rubber stock version) and used that as a guide to
make the cuts. It didn't have to be super accurate to fit in the
rails. This company is also a good resource for other stuff as well.
Mike Drew had pointed folks to it for something else and I really
like
using them. Thanks, Mike R.
Company: Aircraft Spruce & Specialty Co.
Item info: 02-52001 DELRIN ROD 1" (NATURAL)
Price: $5.50 for 12" plus shipping
Link:
([1]http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickke
y=3
080063)
OK, cough it up! What size Delrin (Diameter) and where did you find
it
online? I need to fix mine in the worst way!
Kenny
From: Mike Reilly <[2]reillyms at live.com>
To: Mike Drew via DeTomaso <[3]detomaso at server.detomasolist.com>,
"[4]fred at creekspeak.com" <[5]fred at creekspeak.com>
Subject: Re: [DeTomaso] Seat Slide Rattles
Message-ID: <[6]BAY405-EAS180D18A2FAED123987A18CFBACD0 at phx.gbl>
Content-Type: text/plain; charset="utf-8"
I just updated mine to Delrin after researching on the PI Forum for
possible solutions. I saw the vendors sold at set of eight new
Delrin
rollers for about $80 but a simple internet search netted a one foot
rod that was the correct diameter for about $8. I bought it and then
cut it to the correct width with a hacksaw to make eight of them. I
just put the seats in a few weeks ago and they slide great and I
don?t
hear any noise from them at all. It?s an easy way to go IMHO. Mike
R.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[7]DeTomaso at server.detomasolist.com
[1][8]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an
archive
or approve the archiving of list messages.
References
1. [9]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[10]DeTomaso at server.detomasolist.com
[11]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickkey=3
2. mailto:reillyms at live.com
3. mailto:detomaso at server.detomasolist.com
4. mailto:fred at creekspeak.com
5. mailto:fred at creekspeak.com
6. mailto:BAY405-EAS180D18A2FAED123987A18CFBACD0 at phx.gbl
7. mailto:DeTomaso at server.detomasolist.com
8. http://server.detomasolist.com/mailman/listinfo/detomaso
9. http://server.detomasolist.com/mailman/listinfo/detomaso
10. mailto:DeTomaso at server.detomasolist.com
11. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list