[DeTomaso] Top of radiator connected to swirl tank (It doesn't go to the swirl tank)
Charles McCall
charlesmccall at gmail.com
Fri Sep 23 02:47:39 EDT 2016
Not sure if it helps you, but I received all the files and photos... very
interesting and worth digging around to try to see!
On Fri, Sep 23, 2016 at 6:15 AM, Jack Donahue <demongusta at gmail.com> wrote:
> > It’s probably me or my computer, but I have no pics or diagrams coming
> in. ANYONE ELSE?
>
> > on Sep 22, 2016, at 7:19 PM, Chuck and Linda Huber <lindahuber at cox.net>
> wrote:
> >
> > Here's the other shots of my tanks.
> >
> > These mods were fabricated up by W-Wadeco Inc. (Wade Musil of Tucson, AZ)
> >
> > #8 shows the brass elbow on the top of the swirl tank. The pressure cap
> was removed and the top sealed up. Actually, Wade built me a complete new
> swirl tank.
> >
> > #9 shows the two "inlet fittings" on the top of the expansion tank.
> Wade fabricated this entire tank as well.
> >
> > #10 shows the mounting in the bay. The plumbing is not hooked up in
> this picture.
> >
> > Chuck
> >
> > Wade may be on this board. If so, I want to thank him again for the
> fine work.
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Joseph F. Byrd, Jr. [mailto:byrdjf at embarqmail.com]
> > Sent: Thursday, September 22, 2016 1:19 PM
> > To: 'Guido deTomaso'; 'Chuck and Linda Huber';
> detomaso at server.detomasolist.com
> > Subject: RE: [DeTomaso] Top of radiator connected to swirl tank (It
> doesn't go to the swirl tank)
> >
> > I am being serious this post...
> > I couldn't see the pics, but you confirmed how I thought Chuck had
> plumbed his tanks.
> > I agree that way provides active deaeration and it will be one of the
> few modifications I plan to include.
> >
> > Joe
> >
> > -----Original Message-----
> > From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
> Behalf Of Guido deTomaso
> > Sent: Thursday, September 22, 2016 15:59 PM
> > To: Chuck and Linda Huber; detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
> doesn't go to the swirl tank)
> >
> >
> > This (below) is a genius modification, creating a true active deaeration
> system using suction from the water pump to continuously flow water through
> the expansion tank, drawing air from the high points in the system.
> > But how common, how many have built a system like this ?
> > The TSB modification, which some here ( Tomas? ) have confirmed was
> likely incorporated at the factory, connects the relatively high-pressure
> swirl tank to the lower-pressure radiator, so I conclude while the engine
> is running, nothing is going to flow from the radiator to the swirl tank,
> it's not going to actively de-aerate. Initial fill, I can see it helping.
> After that, I'm scratching my head.
> > Thanks,
> > GD
> >
> > From: Chuck and Linda Huber <lindahuber at cox.net>
> > To: detomaso at server.detomasolist.com
> > Sent: Thursday, September 22, 2016 7:27 AM
> > Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
> doesn't go to the swirl tank)
> >
> > There is definitely a mod that sucks air from both the swirl tank, and
> the top of the radiator into the expansion tank. The expansion tank is
> under suction, and this causes any trapped air to bleed to the expansion
> tank.
> >
> > I did this on my car.
> >
> > I believe that it does its job, especially of removing any trapped air
> from the radiator.
> >
> > I had to run a new, separate metal hard line down the length of the car
> from near the front of the radiator, all the way back up the bulkhead past
> the electrics panel, to near the expansion tank.
> >
> > Here are pictures of my tanks with the appropriate bleed fittings
> installed.
> >
> > Chuck
> >
> >
> > I think Joe was just joking - His Coriolis post confused me...
> >
> >
> > -----Original Message-----
> > From: Owen Cooke [mailto:owen at tadhgcooke.com]
> > Sent: Thursday, September 22, 2016 5:45 AM
> > To: Julian Kift; Guido deTomaso; detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Top of radiator connected to swirl tank, was Re:
> > DeTomaso Digest, Vol 147, Issue 19
> >
> > Julian
> >
> > yes you could be right i need to check it all again
> >
> >
> > owen cooke
> >
> >
> >
> >>
> >>
> >> On 21/09/2016 22:37, Guido deTomaso wrote:
> >>>
> >>>
> >>> "but my car had bleed pipe from the rad back to the swirl tank"
> >>>
> >>> I'm kinda fascinated by this mod, which I believe is in the TSB's,
> >>> connecting the top of the radiator to the swirl tank with a long
> >>> hose. Not sure how it works or what it was supposed to do.
> >>>
> >>> With a completely dry system, I can visualise how it would allow the
> >>> radiator to fill completely, as air formerly trapped in the top of
> >>> the radiator would have a path back to the swirl tank, a higher point.
> >>>
> >>> But once the engine is started, water or air is going to move from
> >>> the swirl tank to the radiator, because of pressure difference. Not
> >>> sure this is helpful but maybe isn't harmful.
> >>>
> >>> Most difficult to visualize, if the engine is off and there is air
> >>> in the radiator, can the weight / head / row gee aych of the water
> >>> in the swirl tank push the air into the swirl tank ? Is there some
> >>> Archimedes rule I'm not seeing here ?
> >>>
> >>> Also did any cars come from the factory this way, was there an
> >>> official path and mounting systems for the hose ? Cable ties ?
> >>>
> >>> Thanks,
> >>>
> >>> Guy D.
> >>>
> >>>
> >
> >
> >
> > <06-26-2014 (8) (Medium).jpg><06-26-2014 (9) (Medium).jpg><06-26-2014
> (11) (Medium).jpg>_______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> >
> > Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
-------------- next part --------------
Not sure if it helps you, but I received all the files and photos...
very interesting and worth digging around to try to see!
On Fri, Sep 23, 2016 at 6:15 AM, Jack Donahue <[1]demongusta at gmail.com>
wrote:
> Itas probably me or my computer, but I have no pics or diagrams
coming in. ANYONE ELSE?
> on Sep 22, 2016, at 7:19 PM, Chuck and Linda Huber
<[2]lindahuber at cox.net> wrote:
>
> Here's the other shots of my tanks.
>
> These mods were fabricated up by W-Wadeco Inc. (Wade Musil of Tucson,
AZ)
>
> #8 shows the brass elbow on the top of the swirl tank.A The pressure
cap was removed and the top sealed up.A Actually, Wade built me a
complete new swirl tank.
>
> #9 shows the two "inlet fittings" on the top of the expansion tank.A
Wade fabricated this entire tank as well.
>
> #10 shows the mounting in the bay.A A The plumbing is not hooked up
in this picture.
>
> Chuck
>
> Wade may be on this board.A If so, I want to thank him again for the
fine work.
>
>
>
>
>
>
>
> -----Original Message-----
> From: Joseph F. Byrd, Jr. [mailto:[3]byrdjf at embarqmail.com]
> Sent: Thursday, September 22, 2016 1:19 PM
> To: 'Guido deTomaso'; 'Chuck and Linda Huber';
[4]detomaso at server.detomasolist.com
> Subject: RE: [DeTomaso] Top of radiator connected to swirl tank (It
doesn't go to the swirl tank)
>
> I am being serious this post...
> I couldn't see the pics, but you confirmed how I thought Chuck had
plumbed his tanks.
> I agree that way provides active deaeration and it will be one of the
few modifications I plan to include.
>
> Joe
>
> -----Original Message-----
> From: DeTomaso [mailto:[5]detomaso-bounces at server.detomasolist.com]
On Behalf Of Guido deTomaso
> Sent: Thursday, September 22, 2016 15:59 PM
> To: Chuck and Linda Huber; [6]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
doesn't go to the swirl tank)
>
>
> This (below) is a genius modification, creating a true active
deaeration system using suction from the water pump to continuously
flow water through the expansion tank, drawing air from the high points
in the system.
> But how common, how many have built a system like this ?
> The TSB modification, which some here ( Tomas? ) have confirmed was
likely incorporated at the factory, connects the relatively
high-pressure swirl tank to the lower-pressure radiator, so I conclude
while the engine is running, nothing is going to flow from the radiator
to the swirl tank, it's not going to actively de-aerate.A Initial
fill, I can see it helping.A After that, I'm scratching my head.
> Thanks,
> GD
>
>A A A From: Chuck and Linda Huber <[7]lindahuber at cox.net>
> To: [8]detomaso at server.detomasolist.com
> Sent: Thursday, September 22, 2016 7:27 AM
> Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
doesn't go to the swirl tank)
>
> There is definitely a mod that sucks air from both the swirl tank,
and the top of the radiator into the expansion tank.A The expansion
tank is under suction, and this causes any trapped air to bleed to the
expansion tank.
>
> I did this on my car.
>
> I believe that it does its job, especially of removing any trapped
air from the radiator.
>
> I had to run a new, separate metal hard line down the length of the
car from near the front of the radiator, all the way back up the
bulkhead past the electrics panel, to near the expansion tank.
>
> Here are pictures of my tanks with the appropriate bleed fittings
installed.
>
> Chuck
>
>
> I think Joe was just joking - His Coriolis post confused me...
>
>
> -----Original Message-----
> From: Owen Cooke [mailto:[9]owen at tadhgcooke.com]
> Sent: Thursday, September 22, 2016 5:45 AM
> To: Julian Kift; Guido deTomaso; [10]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Top of radiator connected to swirl tank, was
Re:
> DeTomaso Digest, Vol 147, Issue 19
>
> Julian
>
> yes you could be rightA i need to check it all again
>
>
> owen cooke
>
>
>
>>
>>
>> On 21/09/2016 22:37, Guido deTomaso wrote:
>>>
>>>
>>> "but my car had bleed pipe from the rad back to the swirl tank"
>>>
>>> I'm kinda fascinated by this mod, which I believe is in the TSB's,
>>> connecting the top of the radiator to the swirl tank with a long
>>> hose.A Not sure how it works or what it was supposed to do.
>>>
>>> With a completely dry system, I can visualise how it would allow
the
>>> radiator to fill completely, as air formerly trapped in the top of
>>> the radiator would have a path back to the swirl tank, a higher
point.
>>>
>>> But once the engine is started, water or air is going to move from
>>> the swirl tank to the radiator, because of pressure difference. Not
>>> sure this is helpful but maybe isn't harmful.
>>>
>>> Most difficult to visualize, if the engine is off and there is air
>>> in the radiator, can the weight / head / row gee aych of the water
>>> in the swirl tank push the air into the swirl tank ?A Is there
some
>>> Archimedes rule I'm not seeing here ?
>>>
>>> Also did any cars come from the factory this way, was there an
>>> official path and mounting systems for the hose ? Cable ties ?
>>>
>>> Thanks,
>>>
>>> Guy D.
>>>
>>>
>
>
>
> <06-26-2014 (8) (Medium).jpg><06-26-2014 (9)
(Medium).jpg><06-26-2014 (11) (Medium).jpg>_________________
______________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [11]DeTomaso at server.detomasolist.com
> [12]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[13]DeTomaso at server.detomasolist.com
[14]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:demongusta at gmail.com
2. mailto:lindahuber at cox.net
3. mailto:byrdjf at embarqmail.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:detomaso-bounces at server.detomasolist.com
6. mailto:detomaso at server.detomasolist.com
7. mailto:lindahuber at cox.net
8. mailto:detomaso at server.detomasolist.com
9. mailto:owen at tadhgcooke.com
10. mailto:detomaso at server.detomasolist.com
11. mailto:DeTomaso at server.detomasolist.com
12. http://server.detomasolist.com/mailman/listinfo/detomaso
13. mailto:DeTomaso at server.detomasolist.com
14. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list