[DeTomaso] Factory deck lid shock mounts And bumpers
Ed Mendez
edducati at mac.com
Mon May 23 18:51:47 EDT 2016
This is what someone did when it was last repaired. So what bracing is there underneath to provide strength?
Looks like they welded this in on top for bracing.
Thanks, Ed
> On 23/05/2016, at 15:32, Larry Stock <larrys at panteraparts.com> wrote:
>
> Hi Ed,
> Pantera Parts Connection makes these little tricky pieces. They need to be
> welded in and that is tricky as well unless the Engine is removed. They
> need to be level, otherwise the decklid struts will not stay up as they
> begin to collapse the pressure lessons to the point of ease of closure.
>
> Our dEck Lid shocks are made just for Pantera¹s and have the proper size
> mounting heads for either the 10 mm 71 allen cap screw fastner, or the 72
> and later 6 mm hex head bolt systems.
>
>
>
>
>
>
> 18126P PPC Shock rear deck lid support $42.00 each
>
>
>
>
>
>
> 18126X Support, Lower Shock Bracket $75.00 each
>
> Larry Stock
>
>
> On 5/23/16, 2:49 PM, "DeTomaso on behalf of Ed Mendez"
> <detomaso-bounces at server.detomasolist.com on behalf of edducati at mac.com>
> wrote:
>
>>
>> Can someone please send me either schematics or blueprints or pictures of
>> the factory decklid mounts for a 1972 serial number 3072. Engine bay
>> side? They are either welded on top of the engine bay (early) or welded
>> and braced from underneath (later).
>>
>> My car is in the body shop and the factory location for the deck lid
>> shocks were missing jerry rigged and non stock. Here's a picture from
>> serial number 36xx blue car, and then from a push button black car. When
>> did the factory change over to the new style of mounting location?
>>
>> My other car 2152 has the early style as pictured. The candy apple car.
>>
>> Also, need the factory locations for the rubber bumper on each side on
>> top of the tail light housings.
>>
>> Thanks Ed
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Sent from my iPhone 6 Plus_______________________________________________
>>
>> Detomaso Forum NO LONGER Managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe, etc.) use
>> the links above.
>
> <18126X Deck-lid Shock mount.jpg><18126X Lower shock support.jpg>
-------------- next part --------------
This is what someone did when it was last repaired. So what bracing is
there underneath to provide strength?
Looks like they welded this in on top for bracing.
Thanks, Ed [cid:3E4E5D35-4ADB-4092-A18A-F6EA6D681991 at local]
On 23/05/2016, at 15:32, Larry Stock <[1]larrys at panteraparts.com>
wrote:
Hi Ed,
Pantera Parts Connection makes these little tricky pieces. They need
to be
welded in and that is tricky as well unless the Engine is removed.
They
need to be level, otherwise the decklid struts will not stay up as
they
begin to collapse the pressure lessons to the point of ease of
closure.
Our dEck Lid shocks are made just for Pantera^1s and have the proper
size
mounting heads for either the 10 mm 71 allen cap screw fastner, or
the 72
and later 6 mm hex head bolt systems.
18126P PPC Shock rear deck lid support $42.00 each
18126X Support, Lower Shock Bracket $75.00 each
Larry Stock
On 5/23/16, 2:49 PM, "DeTomaso on behalf of Ed Mendez"
<[2]detomaso-bounces at server.detomasolist.com on behalf of
[3]edducati at mac.com>
wrote:
Can someone please send me either schematics or blueprints or
pictures of
the factory decklid mounts for a 1972 serial number 3072. Engine bay
side? They are either welded on top of the engine bay (early) or
welded
and braced from underneath (later).
My car is in the body shop and the factory location for the deck lid
shocks were missing jerry rigged and non stock. Here's a picture
from
serial number 36xx blue car, and then from a push button black car.
When
did the factory change over to the new style of mounting location?
My other car 2152 has the early style as pictured. The candy apple
car.
Also, need the factory locations for the rubber bumper on each side
on
top of the tail light housings.
Thanks Ed
Sent from my iPhone 6
Plus_______________________________________________
Detomaso Forum NO LONGER Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[4]DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use
the links above.
<18126X Deck-lid Shock mount.jpg><18126X Lower shock support.jpg>
References
1. mailto:larrys at panteraparts.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:edducati at mac.com
4. mailto:DeTomaso at server.detomasolist.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mount.jpeg
Type: image/jpeg
Size: 222933 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20160523/4b564914/attachment.jpeg>
More information about the DeTomaso
mailing list