[DeTomaso] fuel line story
Thomas Törnblom
tipo874 at gmail.com
Sat Sep 26 16:06:22 EDT 2015
I use cheap polyamide high pressure lines, just like the OEM manufacturers do. No problems in the 14 or so years I've had the EFI installed.
> 26 sep. 2015 kl. 21:27 skrev Rich <hoppe1 at cox.net>:
>
> Well I dodged a bullet today.
> I went out to the garage to start my car.
> It has fuel injection so you turn the key a let the fuel pump run and
> then start it up.
> It did not want to start. that is strange
> I stopped- waited - turned the key listened to the fuel pump and tried
> again.
> I did this a few times.
> So I decided to get out a maybe charge the battery and try again.
> when I opened the door I had to step into a puddle of gas.
> The whole car was in a pool of gas, like maybe a gallon or more on the
> floor.
> I was one spark away from lighting everything I have on fire and if I
> jumped out of the car I would have been in gas or flames.
>
> no warning- no minor leak- complete braided stainless steel line
> failure- maybe 1000 miles but probably 7 years old.
>
> If they are 4 or 5 years old change them!
>
> Rich
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
More information about the DeTomaso
mailing list