[DeTomaso] Fiero seats in a Pantera

[Michael Shortt]

In my case, I have more torso than legs, even the stock seats are too tall
for me, Esp with a helmet.
The C4 seat with the spring removed is about as low as you can get without
cutting the floorplan.

Michael
On Sep 21, 2015 7:50 PM, "Himes, Terry (397C)" <terry.himes at jpl.nasa.gov>
wrote:

> I also have those.  They lined up well and used the Pantera rails I
> believe.  Mine are all black.
>
> More than willing to sell them.
>
>
>
> *"Sometimes I think the surest signs that intelligent life *
>
> *  exists elsewhere in the universe is that none of it has tried*
>
> *  to contact us!"*
>
>
> *Terry W. Himes *
>
> *JPL** Jet Propulsion Laboratory*
>
> *InSight Sequence Team Lead*
>
> *Rosetta/MEX Sequence Team Lead*
>
> Phone: (818) 393-6261
>
> Cell:     (818) 653-8213
>
> Fax:     (818) 393-3147
>
> *thimes at jpl.nasa.gov <thimes at jpl.nasa.gov>*
>
> 🇺🇸
>
> From: DeTomaso <detomaso-bounces at poca.com> on behalf of Michael Shortt <
> michaelsavga at gmail.com>
> Date: Monday, September 21, 2015 4:13 PM
> To: bob Radefeld <bob at radefeld.com>
> Cc: POCA <detomaso at poca.com>
> Subject: Re: [DeTomaso] Fiero seats in a Pantera
>
> Bob,
>
> My seats ( made by Gary Herrig ) are from a C4 Corvette, a lot more
> plentiful than Fire seats with lots of aftermarket seat cover options.
>
> Michael Shortt
> On Sep 21, 2015 5:17 PM, "Bob Radefeld" <bob at radefeld.com> wrote:
>
>     Hello fellow Forum members,
>     Being a daily Forum lurker it is very seldom that I actually have a
>     question that has not already been discussed recently on the Forum. I
>     know that some of you have installed Fiero seats in your car & I would
>     really like to get some information on how you accomplished this & how
>     well you like them compared to the stock seats. If any of you could
>     share your experience with me in this endeavor it would be greatly
>     appreciated. I'm planning on possibly doing this as a winter project
>     this year when the snow starts flying here in Kansas. THANKS for any in
>     site that any of you are willing to share with me! :o))
>     Bob Radefeld A  #5042A
>     Topeka, Ks.
>     [1]bob at radefeld.com
>     [2]785-478-9360A A (cell)
>
> References
>
>     1. mailto:bob at radefeld.com <bob at radefeld.com>
>     2. tel:785-478-9360
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
>
>
>
-------------- next part --------------
   In my case, I have more torso than legs, even the stock seats are too
   tall for me, Esp with a helmet.
   The C4 seat with the spring removed is about as low as you can get
   without cutting the floorplan.

   Michael

   On Sep 21, 2015 7:50 PM, "Himes, Terry (397C)"
   <[1]terry.himes at jpl.nasa.gov> wrote:

   I also have those.A  They lined up well and used the Pantera rails I
   believe.A  Mine are all black.
   More than willing to sell them.

   "SometimesA IA think the surest signs that intelligent lifeA

   A  exists elsewhere in the universe is that none of it has tried

   A  to contact us!"

   Terry W. HimesA

   JPLA Jet Propulsion Laboratory

   InSight Sequence Team Lead

   Rosetta/MEX Sequence Team Lead

   Phone: [2](818) 393-6261

   Cell:A A A A  [3](818) 653-8213

   Fax:A A A A  [4](818) 393-3147

   [5]thimes at jpl.nasa.gov

   d--od-,
   From: DeTomaso <[6]detomaso-bounces at poca.com> on behalf of Michael
   Shortt <[7]michaelsavga at gmail.com>
   Date: Monday, September 21, 2015 4:13 PM
   To: bob Radefeld <[8]bob at radefeld.com>
   Cc: POCA <[9]detomaso at poca.com>
   Subject: Re: [DeTomaso] Fiero seats in a Pantera
   Bob,
   My seats ( made by Gary Herrig ) are from a C4 Corvette, a lot more
   plentiful than Fire seats with lots of aftermarket seat cover options.
   Michael Shortt
   On Sep 21, 2015 5:17 PM, "Bob Radefeld" <[10]bob at radefeld.com> wrote:

   A A A A Hello fellow Forum members,

   A A A A Being a daily Forum lurker it is very seldom that I actually
   have a

   A A A A question that has not already been discussed recently on the
   Forum. I

   A A A A know that some of you have installed Fiero seats in your car &
   I would

   A A A A really like to get some information on how you accomplished
   this & how

   A A A A well you like them compared to the stock seats. If any of you
   could

   A A A A share your experience with me in this endeavor it would be
   greatly

   A A A A appreciated. I'm planning on possibly doing this as a winter
   project

   A A A A this year when the snow starts flying here in Kansas. THANKS
   for any in

   A A A A site that any of you are willing to share with me! :o))

   A A A A Bob Radefeld AA A #5042A

   A A A A Topeka, Ks.

   A A A A [1][11]bob at radefeld.com

   A A A A [2]785-478-9360A A (cell)

   References

   A A A A 1. [12]mailto:bob at radefeld.com

   A A A A 2. tel:[13]785-478-9360

   _______________________________________________

   Detomaso Forum Managed by POCA

   Posted emails must not exceed 1.5 Megabytes

   DeTomaso mailing list

   [14]DeTomaso at poca.com

   [15]http://poca.com/mailman/listinfo/detomaso_poca.com

   To manage your subscription (change email address, unsubscribe, etc.)
   use

   the links above.

References

   1. mailto:terry.himes at jpl.nasa.gov
   2. tel:%28818%29%20393-6261
   3. tel:%28818%29%20653-8213
   4. tel:%28818%29%20393-3147
   5. mailto:thimes at jpl.nasa.gov
   6. mailto:detomaso-bounces at poca.com
   7. mailto:michaelsavga at gmail.com
   8. mailto:bob at radefeld.com
   9. mailto:detomaso at poca.com
  10. mailto:bob at radefeld.com
  11. mailto:bob at radefeld.com
  12. mailto:bob at radefeld.com
  13. tel:785-478-9360
  14. mailto:DeTomaso at poca.com
  15. http://poca.com/mailman/listinfo/detomaso_poca.com