[DeTomaso] Driving in the rain/Decklid opening modification
jderyke at aol.com
jderyke at aol.com
Mon May 4 03:07:16 EDT 2015
Years ago, there were a few Panteras with louvers just in the back window opening. They sort of looked like venetian blinds. The more popular kits had louvers filling the whole deck sugar-scoop area much like a Miura. Both probably changed the rear aero.
-----Original Message-----
From: wawuzat via DeTomaso <detomaso at poca.com>
To: detomaso <detomaso at poca.com>
Sent: Sun, May 3, 2015 12:42 pm
Subject: [DeTomaso] Driving in the rain/Decklid opening modification
Stephen wrote:
OK - now for the more intersting question. Has anyone ever
installed any
form of a partial window in the hole above the engine? Or a
simple piece
of
glass or plexi to fill the hole? I am thinking plexiglass
contoured such
that it fits into a rubber gasket around the opening but is
belled out at
the lower edge to allow air flow and perhaps keep rain from
falling on the
back of the engine? This would have the added benefit of
perhaps making it
a bit harder for someone to reach in and remove things from
the top of the
engine (dog-bone air cleaner for instance) or the caps on the
coolant
tanks.
Given that plexiglass is not all that hard to contour this
would seem like
a
possible improvement as long as it did not overly restrict
airflow around
the engine. Making the assumption that airflow around the
engine is a good
thing.
Comments?
Stephen,
Last year I had been
re-reading some of my old Pantera International
magazines
from the 1970's.
One of the articles in the magazine had to do with
fitting a plexiglass cover
over the rear decklid opening, thereby sealing it
off. As I recall, whoever
came up with the idea was selling a "kit" to
convert your Pantera as well. I
had never seen or heard of such a thing until I
read the article. Sounds to
me like everything old is new again. I will
see if I can locate it and scan
it for the group.
By the way, the last time I was reminded of this
modification was when the
new Kyosho Pantera 1/18 scale models came out last
year and all of them had
this very modification installed in the decklid
opening. It works great
on the model so it must work great in real life
:o)
Jim
_______________________________________________
Detomaso
Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso
mailing
list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To
manage your subscription (change email address, unsubscribe, etc.) use the links
above.
-------------- next part --------------
Years ago, there were a few Panteras with louvers just in the back
window opening. They sort of looked like venetian blinds. The more
popular kits had louvers filling the whole deck sugar-scoop area much
like a Miura. Both probably changed the rear aero.
-----Original Message-----
From: wawuzat via DeTomaso <detomaso at poca.com>
To: detomaso <detomaso at poca.com>
Sent: Sun, May 3, 2015 12:42 pm
Subject: [DeTomaso] Driving in the rain/Decklid opening modification
Stephen wrote:
OK - now for the more intersting question. Has anyone ever
installed any
form of a partial window in the hole above the engine? Or a
simple piece
of
glass or plexi to fill the hole? I am thinking plexiglass
contoured such
that it fits into a rubber gasket around the opening but is
belled out at
the lower edge to allow air flow and perhaps keep rain from
falling on the
back of the engine? This would have the added benefit of
perhaps making it
a bit harder for someone to reach in and remove things from
the top of the
engine (dog-bone air cleaner for instance) or the caps on the
coolant
tanks.
Given that plexiglass is not all that hard to contour this
would seem like
a
possible improvement as long as it did not overly restrict
airflow around
the engine. Making the assumption that airflow around the
engine is a good
thing.
Comments?
Stephen,
Last year I had been
re-reading some of my old Pantera International
magazines
from the 1970's.
One of the articles in the magazine had to do with
fitting a plexiglass cover
over the rear decklid opening, thereby sealing it
off. As I recall, whoever
came up with the idea was selling a "kit" to
convert your Pantera as well. I
had never seen or heard of such a thing until I
read the article. Sounds to
me like everything old is new again. I will
see if I can locate it and scan
it for the group.
By the way, the last time I was reminded of this
modification was when the
new Kyosho Pantera 1/18 scale models came out last
year and all of them had
this very modification installed in the decklid
opening. It works great
on the model so it must work great in real life
:o)
Jim
_______________________________________________
Detomaso
Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso
mailing
list
[1]DeTomaso at poca.com
[2]http://poca.com/mailman/listinfo/detomaso_poca.com
To
manage your subscription (change email address, unsubscribe, etc.) use the links
above.
References
1. mailto:DeTomaso at poca.com
2. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list