[DeTomaso] Shift linkage adjustment
John Taphorn
jtaphorn at kingwoodcable.com
Sat Feb 7 23:16:27 EST 2015
I recently had the problem with 1st gear. It was a loose trunion
bearing/bushing that allowed the shaft to wobble and subsequently
reduced travel of the shifter shaft . Tightened it up and all was well
again.
JT
On 2/7/2015 4:36 PM, gudmund frøland wrote:
> I had the same problem on my car.In my case it was the rubberbushing in
> the rear shaft suport that had come out. Worked the bushing back in and
> sequre it. Problem solved.
> Den LA,rdag, 7. februar 2015 20.56 skrev M Grillot
> <msjaan at sbcglobal.net>:
> I have a 74L and am loosing 2 gear engagement when I am under strong
> acceleration. It will not find 2 gear until usually going though
> 3rd,4th and 5th gear. Could you instruct me on shift linkage
> adjustment. I am looking like a moron when taking off. Hopefully it
> is
> not something I cannot correct.
> Thanks,
> Mike Grillot
> _______________________________________________
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at poca.com
> [2]http://poca.com/mailman/listinfo/detomaso_poca.com
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
>
> References
>
> 1. file://localhost/tmp/tmpNzyRg_.html
> 2. file://localhost/tmp/tmpNzyRg_.html
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
I recently had the problem with 1st gear. It was a loose trunion
bearing/bushing that allowed the shaft to wobble and subsequently
reduced travel of the shifter shaft . Tightened it up and all was well
again.
JT
On 2/7/2015 4:36 PM, gudmund fro/land wrote:
I had the same problem on my car.In my case it was the rubberbushing in
the rear shaft suport that had come out. Worked the bushing back in and
sequre it. Problem solved.
Den LA,rdag, 7. februar 2015 20.56 skrev M Grillot
[1]<msjaan at sbcglobal.net>:
I have a 74L and am loosing 2 gear engagement when I am under strong
acceleration. It will not find 2 gear until usually going though
3rd,4th and 5th gear. Could you instruct me on shift linkage
adjustment. I am looking like a moron when taking off. Hopefully it
is
not something I cannot correct.
Thanks,
Mike Grillot
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[2]1]DeTomaso at poca.com
[2][3]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. [4]file://localhost/tmp/tmpNzyRg_.html
2. [5]file://localhost/tmp/tmpNzyRg_.html
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[6]DeTomaso at poca.com
[7]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.
References
1. mailto:msjaan at sbcglobal.net
2. mailto:1]DeTomaso at poca.com
3. http://poca.com/mailman/listinfo/detomaso_poca.com
4. file://localhost/tmp/tmpNzyRg_.html
5. file://localhost/tmp/tmpNzyRg_.html
6. mailto:DeTomaso at poca.com
7. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list