[DeTomaso] Hydraulic Throw-out Bearing

[B Hower]

If you have a thinner flywheel than OEM, you as I do need a throw-out bearing that will have a farther forward travel. In my setup the OEM style had to travel so far forward that it would drop over ZF snout and hangup...couldn't return. Dennis Q. Makes a throw-out assembly that has spacer rings that allow the bearing to be spaced on the hub. I have used mine for thousands of miles without a problem.
see attached:
Bud

      From: Scott Bell <scott at saccrestorations.net>
 To: 'Mike Drew' <MikeLDrew at aol.com> 
Cc: detomaso at poca.com 
 Sent: Sunday, November 2, 2014 10:24 PM
 Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   
I have a long throw external slave. I need a longer throw than the ZF fork will provide...



-----Original Message-----
From: Mike Drew [mailto:MikeLDrew at aol.com] 
Sent: Sunday, November 02, 2014 8:03 PM
To: Scott Bell
Cc: Pantdino; detomaso at poca.com
Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing

If you only need longer throw I would definitely prefer a long throw external slave....

Mike

Sent from my iPhone

On Nov 2, 2014, at 19:40, "Scott Bell" <scott at saccrestorations.net> wrote:

>  Yes, I am aware of this...
> 
> 
>  Come to think about it, when the stock throw-out bearing fails, you
>  still have to pull out the ZF... J
> 
> 
>  What they offer is a longer throw which is what I am in need of...
> 
> 
> 
>  From: Pantdino [mailto:pantdino at aol.com]
>  Sent: Sunday, November 02, 2014 7:35 PM
>  To: scott at saccrestorations.net; detomaso at poca.com
>  Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
> 
> 
>  You do know that if / when the bearing fails you have to pull the ZF,
>  right?
> 
> 
>  I'm curious as to what they have to offer that offsets that risk.
> 
> 
> 
> 
> 
>  -----Original Message-----
>  From: Scott Bell <[1]scott at saccrestorations.net>
>  To: detomaso <[2]detomaso at poca.com>
>  Sent: Sun, Nov 2, 2014 7:00 pm
>  Subject: [DeTomaso] Hydraulic Throw-out Bearing
> 
>  Does anyone have any experience with a hydraulic throw-out bearing for
>  the ZF? Any recommendations on a unit that works well with the ZF? I
>  was looking at a Tilton 6000 series unit but I am not sure if it will
>  work easily with the ZF?
> 
> 
>  Thanks, Scott
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> [3]DeTomaso at poca.com
> [4]http://poca.com/mailman/listinfo/detomaso_poca.com
> 
> References
> 
>  1. mailto:scott at saccrestorations.net
>  2. mailto:detomaso at poca.com
>  3. mailto:DeTomaso at poca.com
>  4. http://poca.com/mailman/listinfo/detomaso_poca.com
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com


_______________________________________________

Detomaso Forum Managed by POCA

DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com


  
-------------- next part --------------
   If you have a thinner flywheel than OEM, you as I do need a throw-out
   bearing that will have a farther forward travel. In my setup the OEM
   style had to travel so far forward that it would drop over ZF snout and
   hangup...couldn't return. Dennis Q. Makes a throw-out assembly that has
   spacer rings that allow the bearing to be spaced on the hub. I have
   used mine for thousands of miles without a problem.
   see attached:
   Bud
     __________________________________________________________________

   From: Scott Bell <scott at saccrestorations.net>
   To: 'Mike Drew' <MikeLDrew at aol.com>
   Cc: detomaso at poca.com
   Sent: Sunday, November 2, 2014 10:24 PM
   Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   I have a long throw external slave. I need a longer throw than the ZF
   fork will provide...
   -----Original Message-----
   From: Mike Drew [mailto:[1]MikeLDrew at aol.com]
   Sent: Sunday, November 02, 2014 8:03 PM
   To: Scott Bell
   Cc: Pantdino; [2]detomaso at poca.com
   Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   If you only need longer throw I would definitely prefer a long throw
   external slave....
   Mike
   Sent from my iPhone
   On Nov 2, 2014, at 19:40, "Scott Bell" <[3]scott at saccrestorations.net>
   wrote:
   >  Yes, I am aware of this...
   >
   >
   >  Come to think about it, when the stock throw-out bearing fails, you
   >  still have to pull out the ZF... J
   >
   >
   >  What they offer is a longer throw which is what I am in need of...
   >
   >
   >
   >  From: Pantdino [mailto:[4]pantdino at aol.com]
   >  Sent: Sunday, November 02, 2014 7:35 PM
   >  To: [5]scott at saccrestorations.net; [6]detomaso at poca.com
   >  Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   >
   >
   >  You do know that if / when the bearing fails you have to pull the
   ZF,
   >  right?
   >
   >
   >  I'm curious as to what they have to offer that offsets that risk.
   >
   >
   >
   >
   >
   >  -----Original Message-----
   >  From: Scott Bell <[1][7]scott at saccrestorations.net>
   >  To: detomaso <[2][8]detomaso at poca.com>
   >  Sent: Sun, Nov 2, 2014 7:00 pm
   >  Subject: [DeTomaso] Hydraulic Throw-out Bearing
   >
   >  Does anyone have any experience with a hydraulic throw-out bearing
   for
   >  the ZF? Any recommendations on a unit that works well with the ZF? I
   >  was looking at a Tilton 6000 series unit but I am not sure if it
   will
   >  work easily with the ZF?
   >
   >
   >  Thanks, Scott
   >
   > _______________________________________________
   >
   > Detomaso Forum Managed by POCA
   >
   > DeTomaso mailing list
   > [3][9]DeTomaso at poca.com
   > [4][10]http://poca.com/mailman/listinfo/detomaso_poca.com
   >
   > References
   >
   >  1. mailto:[11]scott at saccrestorations.net
   >  2. mailto:[12]detomaso at poca.com
   >  3. mailto:[13]DeTomaso at poca.com
   >  4. [14]http://poca.com/mailman/listinfo/detomaso_poca.com
   > _______________________________________________
   >
   > Detomaso Forum Managed by POCA
   >
   > DeTomaso mailing list
   > [15]DeTomaso at poca.com
   > [16]http://poca.com/mailman/listinfo/detomaso_poca.com
   _______________________________________________
   Detomaso Forum Managed by POCA
   DeTomaso mailing list
   [17]DeTomaso at poca.com
   [18]http://poca.com/mailman/listinfo/detomaso_poca.com

References

   1. mailto:MikeLDrew at aol.com
   2. mailto:detomaso at poca.com
   3. mailto:scott at saccrestorations.net
   4. mailto:pantdino at aol.com
   5. mailto:scott at saccrestorations.net
   6. mailto:detomaso at poca.com
   7. mailto:scott at saccrestorations.net
   8. mailto:detomaso at poca.com
   9. mailto:DeTomaso at poca.com
  10. http://poca.com/mailman/listinfo/detomaso_poca.com
  11. mailto:scott at saccrestorations.net
  12. mailto:detomaso at poca.com
  13. mailto:DeTomaso at poca.com
  14. http://poca.com/mailman/listinfo/detomaso_poca.com
  15. mailto:DeTomaso at poca.com
  16. http://poca.com/mailman/listinfo/detomaso_poca.com
  17. mailto:DeTomaso at poca.com
  18. http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC05626-aa.jpg
Type: image/jpeg
Size: 329876 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20141103/9d3f67fa/attachment.jpg>