[DeTomaso] On the scrounge...
Mike Drew
MikeLDrew at aol.com
Sun Mar 9 17:10:25 EDT 2014
Kirby,
You can get those wheels in any width, any offset. Sorry I didn't twig to the fact you have a narrow body car.
Mike
Sent from my iPhone
On Mar 9, 2014, at 13:49, Kirby Schrader <kirby.schrader at gmail.com> wrote:
>
> No…. Those won’t work, Mike.
>
> I do not have a Group 4.
> I have GTS flares on the car.
>
> I can go measure, but I think those wheels would have the tires sticking out the side of the car.
>
> The rears, for sure.
> The fronts maybe….
>
>
> On Mar 9, 2014, at 14:40, MikeLDrew at aol.com wrote:
>
>>
>> In a message dated 3/9/14 6 49 55, kirby.schrader at gmail.com writes:
>>
>>
>>> I’m looking for a second set of wheels for the race car.
>>
>>
>> >>>What you want are Bassett wheels. They make fantastic wheels that are, when painted appropriately, a rough approximation of the factory Gr4 wheels.
>>
>> Wheel spec below.
>>
>> 2 15"x13" D-Hole style with 5.5" back spacing....$109 each
>>
>> 2 15"x10" D-Hole style with 4.5" back spacing....$92 each
>>
>> All with a 4.5"bolt pattern.
>>
>> Somewhere there's photos of a fantastic blue Gr4 clone wearing those wheels, in gold. I couldn't find that on my hard drive (it's buried somewhere) but I do have photos of a black street Gr4 clone with those same wheels, also in gold (attached).
>>
>> Frankly, these wheels are so good and so cheap that I would suggest you buy two sets and scrap the ones you have now! :>)
>>
>> Mike
>> <Bassett wheelsweb.jpg>
>
-------------- next part --------------
Kirby,
You can get those wheels in any width, any offset. Sorry I didn't twig
to the fact you have a narrow body car.
Mike
Sent from my iPhone
On Mar 9, 2014, at 13:49, Kirby Schrader <[1]kirby.schrader at gmail.com>
wrote:
No.... Those won't work, Mike.
I do not have a Group 4.
I have GTS flares on the car.
I can go measure, but I think those wheels would have the tires
sticking out the side of the car.
The rears, for sure.
The fronts maybe....
On Mar 9, 2014, at 14:40, [2]MikeLDrew at aol.com wrote:
In a message dated 3/9/14 6 49 55, [3]kirby.schrader at gmail.com
writes:
I'm looking for a second set of wheels for the race car.
>>>What you want are Bassett wheels. They make fantastic wheels
that are, when painted appropriately, a rough approximation of the
factory Gr4 wheels.
Wheel spec below.
2 15"x13" D-Hole style with 5.5" back spacing....$109 each
2 15"x10" D-Hole style with 4.5" back spacing....$92 each
All with a 4.5"bolt pattern.
Somewhere there's photos of a fantastic blue Gr4 clone wearing those
wheels, in gold. I couldn't find that on my hard drive (it's buried
somewhere) but I do have photos of a black street Gr4 clone with
those same wheels, also in gold (attached).
Frankly, these wheels are so good and so cheap that I would suggest
you buy two sets and scrap the ones you have now! :>)
Mike
<Bassett wheelsweb.jpg>
References
1. mailto:kirby.schrader at gmail.com
2. mailto:MikeLDrew at aol.com
3. mailto:kirby.schrader at gmail.com
More information about the DeTomaso
mailing list