[DeTomaso] Front Fender construction

[Will Kooiman]

It could have been a repair/restoration back to a non-flair car.

On Jan 25, 2014, at 1:45 PM, "doug351c" <doug351c at gmail.com> wrote:

> We stripped the other fender yesterday and found the same weld so I tend to agree with your opinion; what's your opinion based on?
>  
> Doug Braun
> blue 73L #5505
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at poca.com]On Behalf Of R.J.
> Sent: Friday, January 24, 2014 1:14 PM
> To: detomaso at poca.com
> Subject: Re: [DeTomaso] Front Fender construction
> 
> Yes, they all where made that way, maybe except early prototypes.
> 
> Am 24.01.2014 22:08, schrieb doug351c:
>> Hi Guys,
>> 
>> I'm in the middle of a restoration on my Pantera and ran across what appears
>> to be a machine-tig-welded seam that runs the length of the front fender
>> about an inch down from the top-outer crease.  My question is - were all
>> factory Pantera front fenders made in two pieces this way?
>> 
>> Doug Braun
>> blue 73L #5505
>>  
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com

-------------- next part --------------
   It could have been a repair/restoration back to a non-flair car.

   On Jan 25, 2014, at 1:45 PM, "doug351c" <[1]doug351c at gmail.com> wrote:

   We stripped the other fender yesterday and found the same weld so I
   tend to agree with your opinion; what's your opinion based on?

   Doug Braun
   blue 73L #5505

   -----Original Message-----
   From: DeTomaso [mailto:detomaso-[2]bounces at poca.com]On Behalf Of R.J.
   Sent: Friday, January 24, 2014 1:14 PM
   To: [3]detomaso at poca.com
   Subject: Re: [DeTomaso] Front Fender construction

     Yes, they all where made that way, maybe except early prototypes.

   Am 24.01.2014 22:08, schrieb doug351c:

Hi Guys,

I'm in the middle of a restoration on my Pantera and ran across what appears
to be a machine-tig-welded seam that runs the length of the front fender
about an inch down from the top-outer crease.  My question is - were all
factory Pantera front fenders made in two pieces this way?

Doug Braun
blue 73L #5505


   _______________________________________________
   Detomaso Forum Managed by POCA
   DeTomaso mailing list
   [4]DeTomaso at poca.com
   http://poca.com/mailman/listinfo/detomaso_poca.com

References

   1. mailto:doug351c at gmail.com
   2. mailto:bounces at poca.com
   3. mailto:detomaso at poca.com
   4. mailto:DeTomaso at poca.com